Development of 3-D Composites

  • J. R. Benzinger
Part of the Applications of Cryogenic Technology book series (APCT, volume 10)

Abstract

Interlaminar shear strength is one of the most important properties of laminated composites, not only for fusion magnets, but for many other applications. Several processes that have been developed over the years to improve interlaminar shear strength include 3-D woven orthogonal fabrics, multiple warp weaving, stitch bonding of multi-layers of 2-D fabrics, and needle punching of non-woven and woven fabrics.

Keywords

Flexural Strength Interlaminar Shear Strength Fusion Magnet Cryogenic Engineer Compression Fatigue 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Y. Iwasaki, S. Nishiima, J. Yasuda, T. Hirokawa, and T. Okada, Development of 3DGFRP for cryogenic use, in: “Advances in Cryogenic Engineering, Vol. 36, ” R.P. Reed ann F.R. Fickett, Eds., Plenum Press, NY (1990).Google Scholar
  2. 2.
    M. B. Kasen, G. R. MacDonald, D. H. Beekman and R. E. Schramm, j: “Advances in Cryogenic Engineering, Vol. 26,” A.F. Clark and R.P. Reed, Eds., Plenum Press, New York (1980), pp. 235–244.CrossRefGoogle Scholar
  3. 3.
    J. R. Benzinger, Manufacturing capabilities of CR grade laminates, in: “Advances in Cryogenic Engineering, Vol. 26,” A.F. Clark and R.P. Reed, Eds. Plenum Press, New York (1980), pp. 252–258.CrossRefGoogle Scholar
  4. 4.
    R. Coltman, Jr. and C. Klabunde, “Mechanical strength of low temperature-irradiated polymides: a five-to-tenfold improvement in dose-resistance over epoxies,” J. Nuc. Mat., 103, 104 (1981), pp. 717–722.CrossRefGoogle Scholar
  5. 5.
    J. R. Benzinger, The manufacture and properties of radiation resistant laminates, in: “Advances in Cryogenic Engineering, Vol. 28,” R.P. Reed and A.F. Clark, Eds., Plenum Press, New York (1982), p. 231.CrossRefGoogle Scholar
  6. 6.
    H. Becker and T.T. Cookson, “Effect of Normal Pressure on Interlaminar Shear Strength” NBS-DOE Workshop, 1985.Google Scholar
  7. 7.
    R. E. Schmunk, H. Becker, “Irradiation and Testing of Spaulradk S for Fusion Magnet Applications” Fusion Energy, p. 282.Google Scholar
  8. 8.
    T. J. McManamy, J. E. Brasier and P. Snook, Insulation interlaminar shear strength testing with compression and irradiation, in: “Proc. IEEE 13th Symposium on Fusion Engineering Vol. 1,” IEEE, New York (1990), pp. 342–347.Google Scholar
  9. 9.
    H. Blake, Stress Analysis of the Princeton Plasma Physics Laboratory 1/2 x 1/2 in. Shear/Compression Test Fixture, Oak Ridge National Laboratory Report ORNL/ATD-23, 1989.Google Scholar
  10. 10.
    R. Schmunk, L. Miller, and H. Becker, “Tests on irradiated magnet insulator materials,” J. Nue. Mat., 122, 123 (1984), pp 1381–1385.CrossRefGoogle Scholar
  11. 11.
    S. Nishiima et al., “Development of radiation resistant composite materials for fusion magnets,” presented at ICMC Conference, Los Angeles, July 1989.Google Scholar
  12. 12.
    M. Jacox, Neutron and Gamma Dose Calculation for CIT Materials in the ATR 11 Position, Idaho National Engineering Laboratory Report NRRT-N-90–003, 1990.Google Scholar
  13. 13.
    J. Rodgers and R. Anderi, Neutron Monitoring Measurements for the CIT Materials Irradiation in the ATR 11 Position, EGG Report EGG-cS-8821, 1989.Google Scholar
  14. 14.
    T. J. McManamy, G. Kanemoto, P. Snook, “The Insulation Irradiation Test Program for the Compact Ignition Tokamak” ICMC Low Temp., V, Heidelburg, May 1990.Google Scholar

Copyright information

© Springer Science+Business Media New York 1991

Authors and Affiliations

  • J. R. Benzinger
    • 1
  1. 1.Spaulding Composites Co.TonawandaUSA

Personalised recommendations