Abstract
Interstrand AC losses and contact resistances of Rutherford cables are easily affected by curing conditions. We have measured the interstrand AC losses and contact resistances for three kinds of Rutherford cables, made from strands with a Cu matrix, a CuMn barrier around a filamentary bundle and a CuMn matrix inside a Cu sheath. The losses of all the cables were relatively large, if there was no release of pressure after curing. They were significantly reduced after releasing the pressure at a room temperature except for the cable with a Cu matrix at a high curing temperature. The measured contact resistances show the same dependencies. Strands of the cable with a Cu matrix were bonded at crossover points by curing at higher temperature, and bonded crossover points were not broken when pressure is released after curing. We have also observed contact surfaces of the strands by using a Scanning Electron Microscope, and found that there were traces of diffusion bonding on the contact surfaces. The fact that the other cables show smaller AC losses by releasing pressure can be explained by the mechanical properties of the matrix materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
S. Delchamps et al., “AC Loss Measurement of SSC Dipole Magnets,” Proceedings of the ICFA Workshop on AC Superconductivity, Tsukuba, (1992) pp. 19.
G. H. Morgan, “Eddy Currents in Flat Metal-filled Superconducting Braids,” J. Appl. Phys., 44: 3319 (1973).
M. Polak, et al., “Losses in 23 Strands NbTi and Nt3Sn Flat Cables,” IEEE Trans. Magn., 17: 2035 (1981).
M. Wake et al., “AC Loss in Energy Doubler Magnets,” IEEE Trans. Magn., 15: 141 (1979).
V. E. Sytnikov et al., “Coupling Losses in Superconducting Transposed Conductors Located in Changing Magnetic Field,” Cryogenics, 29: 926 (1889).
A. P. Verweij and H. H. J. ten Kate, “Coupling Currents in Rutherford Cables under Time Varying Conditions,” IEEE Trans. Applied Superconductivity, 3: 146 (1993).
Y. Lei et al., “Study on Interstrand Coupling Losses in Rutherford-type Superconducting Cables,” KEK report, 92–18(1993).
A. Kimura et al., “Influence of Curing on AC Losses of Cables for Superconducting Accelerator Magnets,” IEEE Trans. Magn., 30: 2515 (1994).
A. Kimura et al., “Stabilities of the Rutherford Cables with Cu Matrix and CuMn Barrier,” to be published in IEEE Trans. Applied Superconductivity (1995)
O. Ohashi, private communications
A. Kimura et al., to be published in Cryogenics.
E. G. Collings et al., “Magnetic Studies of AC Loss in Pressurized Rutherford Cables with Coated Strands and Resistive Cores,” this conference
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Springer Science+Business Media New York
About this chapter
Cite this chapter
Kimura, A., Shintomi, T., Terashima, A., Kawabata, S., Sumiyoshi, F., Hirabayashi, H. (1996). Contact Surfaces between Strands of Rutherford Cables in Various Curing Conditions. In: Summers, L.T. (eds) Advances in Cryogenic Engineering Materials . Advances in Cryogenic Engineering Materials , vol 42. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-9059-7_168
Download citation
DOI: https://doi.org/10.1007/978-1-4757-9059-7_168
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-9061-0
Online ISBN: 978-1-4757-9059-7
eBook Packages: Springer Book Archive