Abstract
This paper describes nonstandard methods of testing Charpy specimens at 4 K. We show that the initial temperature can be achieved using a helium flow method with U-type as well as C-type machines. Unfortunately, heating during impact loading weakens the correlation with quasistatic fracture toughness parameters. Alternative test procedures using fatigue precracked specimens were not fully satisfactory, either: (1) Precracking reduces the impact energy by 35–54%, but the specimen heating is still significant; (2) slow bending curtails the heating most effectively, but then the desired simplicity of a screening test is lost.
Contribution of NIST, not subject to copyright.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, Designation E 23–88, in: 1990 Annual Book of ASTM Standards, Amer. Soc. Test. Maters., Philadelphia, 03.01:197–212 (1990).
R.L. Tobler, R.P. Reed, I.S. Hwang, M.M. Morra, R.G. Ballinger, H. Nakajima, and S. Shimamoto, Charpy Impact Tests Near Absolute Zero, J. Test. Eval., 19: 34–40 (1991).
H. Nakajima, K. Yoshida, H. Tsuji, R.L. Tobler, I.S. Hwang, M.M. Morra, and R.G. Ballinger, The Charpy Impact Test as an Evaluation of 4-K Fracture Toughness, Adv. Cryo. Eng. this volume.
I.S. Hwang, M.M. Morra, R.G. Ballinger, H. Nakajima, S. Shimamoto, and R.L. Tobler, Charpy Absorbed Energy and JIc as Measures of Cryogenic Fracture Toughness, J. Test. Eval. accepted for publication.
S. Jin, W.A. Horwood, J.W. Morris, Jr., and V.F. Zackay, A Simple Method for Charpy Impact Testing Below 6 Degrees K, Adv. Cryo. Eng., 19: 373–378 (1974).
T. Ogata, K. Hiraga, K. Nagai, and K. Ishikawa, A Simplified Method for Charpy Impact Testing Near Liquid Helium Temperature, Cryogenics, 22: 481–482 (1982).
W.R. Witzke and J.R. Stephens, Development of Strong and Tough Cryogenic Fe-12Ni Alloys Containing Reactive Metal Additions, Cryogenics, 17: 681–688 (1977).
W.G. Dobson and D.L. Johnson, Effect of Strain Rate on Measured Mechanical Properties of Stainless Steel at 4 K, Adv. Cryo. Eng., Vol. 30, 1984, pp. 185–192.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1992 Springer Science+Business Media New York
About this chapter
Cite this chapter
Tobler, R.L., Bussiba, A., Guzzo, J.F., Hwang, I.S. (1992). Charpy Specimen Tests at 4 K. In: Fickett, F.R., Reed, R.P. (eds) Materials. Advances in Cryogenic Engineering, vol 38. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-9050-4_27
Download citation
DOI: https://doi.org/10.1007/978-1-4757-9050-4_27
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-9052-8
Online ISBN: 978-1-4757-9050-4
eBook Packages: Springer Book Archive