The New Superfluid Helium Cryostats for the Short Straight Sections of the CERN Large Hadron Collider (LHC)

  • W. Cameron
  • Ph. Dambre
  • T. Kurtyka
  • V. Parma
  • T. Renaglia
  • J. M. Rifflet
  • P. Rohmig
  • B. Skoczen
  • T. Tortschanoff
  • Ph. Trilhe
  • P. Vedrine
  • D. Vincent
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)

Abstract

The lattice of the CERN Large Hadron Collider (LHC) contains 364 Short Straight Section (SSS) units, one in every 53 m long half-cell. An SSS consists of three major assemblies: the standard cryostat section, the cryogenic service module, and the jumper connection. The standard cryostat section of an SSS contains the twin aperture high-gradient superconducting quadrupole and two pairs of superconducting corrector magnets, operating in pressurized helium II at 1.9 K. Components for isolating cryostat insulation vacuum, and the cryogenic supply lines, have to be foreseen. Special emphasis is given to the design changes of the SSS following adoption of an external cryogenic supply line (QRL). A jumper connection connects the SSS to the QRL, linking all the cryogenic tubes necessary for the local full-cell cooling loop [at every second SSS]. The jumper is connected to one end of the standard cryostat section via the cryogenic service module, which also houses beam diagnostics, current feedthroughs, and instrumentation capillaries. The conceptual design fulfilling the tight requirements of magnet alignment precision and cryogenic performance are described. Construction details, aimed at minimizing costs of series manufacturing and assembly, while ensuring the high quality of this complex accelerator component, are given.

Keywords

Large Hadron Collider Support Post CERN Large Hadron Collider Thermal Shield Beam Position Monitor 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    W. Cameron, B. Jenny, G. Riddone, P. Rohmig and R. van Weelderen “Design and construction of a prototype superfluid helium cryostat for the Short Straight Sections of the CERN Large Hadron Collider (LHC)”, Advances in Cryogenic Engineering, Vol. 39 (1994).Google Scholar
  2. 2.
    T. Tortschanoff et al., “The Short Straight Sections for the LHC”, Particle Accelerator Conference, Vancouver (1997).Google Scholar
  3. 3.
    V. Benda et al. “Conceptual design of the cryogenic system for the Large Hadron Collider (LHC)”, Eurpean Particle Accelerator Conference, Sitges (1996).Google Scholar
  4. 4.
    M. Bona et al. “Cryogenic and vacuum sectorisation of the LHC arcs”, LHC Project Report 60 (1996).Google Scholar
  5. 5.
    J.C. Brunet, V. Parma, G. Peon, A. Poncet, P. Rohmig, B. Skoczen and L.R. Williams, “Design of the second series 15 m LHC prototype Dipole magnet cryostats”, presented at this conference.Google Scholar
  6. 6.
    M. Mathieu, V. Parma, Th. Renaglia, P. Rohmig and L.R. Williams, “Supporting systems from 293 K to 1.9 K for the Large Hadron Collider (LHC) cryo-magnets”, presented at this conference.Google Scholar
  7. 7.
    B. Jenny, P. Rohmig and J.M. Uriarte, “A composite vacuum barrier for the LHC Short Straight Section”, Advances in Cryogenic Engineering, Vol. 41A (1996).Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • W. Cameron
    • 1
  • Ph. Dambre
    • 3
  • T. Kurtyka
    • 1
  • V. Parma
    • 1
  • T. Renaglia
    • 1
  • J. M. Rifflet
    • 2
  • P. Rohmig
    • 1
  • B. Skoczen
    • 1
  • T. Tortschanoff
    • 1
  • Ph. Trilhe
    • 1
  • P. Vedrine
    • 2
  • D. Vincent
    • 3
  1. 1.European Organization for Nuclear ResearchCERNGeneva 23Switzerland
  2. 2.CEA SACLAY DAPNIAGif sur YvetteFrance
  3. 3.CNRSIPNOrsay CedexFrance

Personalised recommendations