Systematic Investigations of Regenerators for 4.2K-Refrigerators

  • A. Lang
  • H.-U. Häfner
  • C. Heiden
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)


Using Rare Earth materials and compounds as regenerator, several groups have reached temperatures below T=4.2K with Gifford-McMahon (GM), as well as with pulse tube refrigerators. Their performance is substantially determined by the choice of Rare Earth material, especially its specific heat. Based on measured pressures and displacements of an existing mechanically driven GM coldhead, cooling capacities are predicted theoretically for different regenerator matrices. This will be compared with corresponding experimental results which include measurements of the temperature profile in the regenerator. The results are discussed in terms of mass flow rate through the regenerator and the influence of different loss mechanisms. So far, an optimum capacity of >1W was achieved at T=4.2 K, using a 6 kW compressor unit for operation. Different modifications of the displacer design however were necessary in order to achieve a very good repeatability of results and high stability during operation.


Mass Flow Rate Regenerator Type Cool Capacity Cycle Frequency Pulse Tube 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    W.E. Gifford and T.E. Hoffman, “A new refrigeration system for 4.2K”. Adv. Cryo. Eng., 6:82 (1961)Google Scholar
  2. 2.
    M.D. Atrey, H.U. Häfner and C. Heiden, “Development of a computer model for two-stage Gifford-McMahon cryocooler”, Adv. Cryo. Eng., 41:1593 (1996)CrossRefGoogle Scholar
  3. 3.
    T. Hashimoto, T. Tsukagoshi, H. Nitta, M. Yabuki. T. Kuriyama and H. Nakagome. “Excellent character of multi-layer type magnetic regenerator near 4.2K”, Cryocoolers 8:677 (1995)Google Scholar
  4. 4.
    T. Kuriyama et al. “High efficient two stage GM refrigerator with magnetic material in the liquid helium temperature region”, Adv. Cryo. Eng. 35:1261 (1990)Google Scholar
  5. 5.
    C. Wang, University of Giessen, priv. comm. Google Scholar
  6. 6.
    T. Kuriyama, M. Takahashi, H. Nakagome, T. Hashimoto, T. Eda and M. Yabuki, “Regenerator performance and refrigeration mechanism for 4K-GM refrigerator using Rare Earth compound regenerator materials”, Cryocooler 7:429 (1992)Google Scholar
  7. 7.
    P.Y. Wu et. al., “Dynamic simulation of magnetic material regenerator and comparison with experiment”. Cryogenics 36:259 (1996)CrossRefGoogle Scholar
  8. 8.
    C. S. Hong and X.D. Xu, “On the thermodynamic cycle of the low temperature GM refrigerator”, Crvoge-nics 34:183 (1994)Google Scholar
  9. 9.
    C. Wang, G. Thummes and C. Heiden, “A two stage pulse tube cooler operating below 4K”. Cryogenics 37:159(1997)CrossRefGoogle Scholar
  10. 10.
    T. Kuriyama, et al., “Optimization of operational parameters for 4K-GM refrigerator”. Adv. Crvo. Eng. 41:1615(1996)CrossRefGoogle Scholar
  11. 11.
    J. Chafe, G. Green and C. Riedy, “Neodymium regenerator test results in a standard Gifford-McMahon refrigerator”, Cryocooler 7:1157 (1992)Google Scholar
  12. 12.
    Z. Zhu and L. Zhang, “The theoretical cooling capacity and heat loss analysis of a 4.2K -GM refrigerator”. Adv. Cryo. Eng., 41:1639 (1996)CrossRefGoogle Scholar
  13. 13.
    GASPAK 3.20 Cryodata Inc. Niwot, Colorado. USA (1992)Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • A. Lang
    • 1
  • H.-U. Häfner
    • 1
  • C. Heiden
    • 2
  1. 1.Leybold Vacuum GmbHCologneGermany
  2. 2.Institute of Applied PhysicsUniversity of GiessenGiessenGermany

Personalised recommendations