Performance of Crycooler Shunt Heat Pipes

Abstract

In many important cryogenic applications the use of liquid cryogens for system cooling is either not feasible or is unsuitable. In such cases a cryogenic refrigeration system or multi stage cryocooler must be employed to provide the necessary cooling. To shorten cooldown time for such a system, especially if the thermal mass is large, a thermal shunt directly connecting the first stage of the cryocooler to the load during cooldown is desirable. This thermal shunt allows effective utilization of the greater cooling power available from the first stage of the cryocooler early in the cooldown. Upon reaching operating temperature, the thermal shunt must exhibit a high resistance to thermally isolate the first stage of the cryocooler from the load. Heat pipes are well suited to achieve these objectives. The Advanced Lightweight Influence Sweep System (ALISS), under development by the U. S. Navy for shallow water magnetic mine countermeasures, employs a large, conductively cooled, superconducting magnet that must be cooled from 300 to 4.2 K. Cryogenic heat pipes acting as cryocooler thermal shunts are used to shorten the cooldown time. Ethane, nitrogen and oxygen were evaluated as possible working fluids. A thermal model of the ALISS was developed to evaluate the cooldown performance of various heat pipe combinations. In conjunction with heat pipe performance tests, this model was used to select a suitable design for the heat pipe thermal shunts.