Optimal Design of Sizes in Binary Current Leads Cooled by Cryogenic Refrigerator

  • H.-M. Chang
  • S. J. Song
  • G. W. Hong
  • H. J. Lee
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)


Analysis is performed to determine the optimal lengths or cross-sectional areas of refrigerator-cooled current leads that can be applied to the conduction-cooled superconducting systems. The binary current lead is composed of the series combination of a normal metal at the upper (warm) part and a high Tc superconductor (HTS) at the lower (cold) part. The heat conduction toward the cold end of HTS part constitutes a major refrigeration load. In addition, the joint between the two parts should be cooled by a refrigerator in order to reduce the load at the low end and maintain the HTS part in a superconducting state. The sum of the work inputs required for the two refrigeration loads needs to be minimized for an optimal operation. In this design, three simple models that depict the refrigeration performance as functions of cooling temperature are developed based on some of the existing refrigerators. By solving one-dimensional conduction equation that takes into account the temperature-dependent properties of the materials, the refrigeration works are numerically calculated for various values of the joint temperatures and the sizes of two parts. The results show that for a given size of HTS, there exist the optimal values for the joint temperature and the size of the normal metal. It is also found that the refrigeration work decreases as the length of HTS increases and that the optimal size of the normal metal is quite independent of the size of HTS. For a given length of HTS, there is an optimal cross-sectional area and it increases as the length increases. The dependence of the optimal sizes on the refrigerator models employed are presented for 1 kA lead.


Normal Metal Current Lead Cooling Load Refrigeration Temperature Optimal Diameter 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    M.N. Wilson., “Superconducting Magnets,” Oxford University Press, New York (1986) pp.256–271.Google Scholar
  2. 2.
    G. K. White, “Experimental Techniques in Low-Temperature Physics,” Clarendon Press, Oxford, (1979) pp.284–305, p.319.Google Scholar
  3. 3.
    R. Wesche, and A.M. Fuchs, Cryogenics, 34:145 (1994).CrossRefGoogle Scholar
  4. 4.
    M.C. Jones et al.., Cryogenics, 18:337 (1978).CrossRefGoogle Scholar
  5. 5.
    P.F. Herrmann et al., IEEE Trans. App. Superconductivity, 3:876, (1993).CrossRefGoogle Scholar
  6. 6.
    P.F. Herrmann et al., Cryogenics, 33:555 (1993).CrossRefGoogle Scholar
  7. 7.
    P.F. Herrmann et al., Cryogenics, 34:543 (1994).CrossRefGoogle Scholar
  8. 8.
    J.R. Hull et al., Cryogenics, 32:822 (1992).CrossRefGoogle Scholar
  9. 9.
    S.Y. Seol and J.R. Hull, Cryogenics, 33:966 (1993).CrossRefGoogle Scholar
  10. 10.
    B. Dorri et al., IEEE Trans. Magnetics, 27:1858 (1991).CrossRefGoogle Scholar
  11. 11.
    T. Kuriyama et al., “Advances in Cryogenic Engineering,” Vol.41, Plenum Press, New York (1996) pp. 1615–1622.CrossRefGoogle Scholar
  12. 12.
    T. Hase et al., Cryogenics, 36:971 (1996).CrossRefGoogle Scholar
  13. 13.
    K. Watanabe et al., Cryogenics, 36:1019 (1996).CrossRefGoogle Scholar
  14. 14.
    L. Dresner, “Stability of Superconductors,” Plenum Press, New York, (1995), pp. 15–34.Google Scholar
  15. 15.
    S. Yang and J.M. Pfotenhauer, “Advances in Cryogenic Engineering,” Vol.41, Plenum Press, New York (1996),pp.567–572.CrossRefGoogle Scholar
  16. 16.
    R. Li et al., “Advances in Cryogenic Engineering,” Vol.41, Plenum Press, New York (1996), pp.1601–1607.CrossRefGoogle Scholar
  17. 17.
    R. Li et al., “Advances in Cryogenic Engineering,” Vol.41, Plenum Press, New York (1996), pp.1631–1637.Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • H.-M. Chang
    • 1
  • S. J. Song
    • 1
  • G. W. Hong
    • 2
  • H. J. Lee
    • 2
  1. 1.Department of Mechanical EngineeringHong Ik UniversitySeoulKorea
  2. 2.Korea Atomic Energy Research InstituteDaejeonKorea

Personalised recommendations