Simulation of Nanoindentation Test Data

  • Anthony C. Fischer-Cripps
Part of the Mechanical Engineering Series book series (MES)


The methods of analysis described in Chapter 3 can be used to provide a useful computation of simulated load-displacement curves, where the mechanical properties of both the specimen and indenter are given as input parameters. A simulated load-displacement curve allows comparisons to be made with actual experimental data. For example, such comparisons may yield information about non-linear events such as cracking or phase changes that might occur with an actual specimen during an indentation test. In this chapter, the procedure for generating a simulated load-displacement curve is described in detail and a comparison is made with experimental data from materials with a wide range of ratio of modulus to hardness.


Contact Pressure Elastic Recovery Finite Element Result Berkovich Indenter Conical Indenter 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    J.S. Field and M.V. Swain, “A simple predictive model for spherical indentation,” J. Mater. Res. 8 2, 1993, pp. 297–306.CrossRefGoogle Scholar
  2. 2.
    W.C. Oliver and G.M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res. 7 4, 1992, pp. 1564–1583.CrossRefGoogle Scholar
  3. 3.
    R.B. King, “Elastic analysis of some punch problems for a layered medium,” Int. J. Solids Structures, 23 12, 1987, pp. 1657–1664.CrossRefGoogle Scholar
  4. 4.
    W.A. Caw, “The elastic behaviour of a sharp obtuse wedge impressed on a plane,” J. Sci. Instr., J. Physics E, 2 2, 1969, pp. 73–78.CrossRefGoogle Scholar
  5. 5.
    A.C. Fischer-Cripps, “Elastic recovery and reloading of hardness impressions with a conical indenter,” Mat. Res. Soc. Symp. Proc. 750, 2003, pp. Y6.9.1—Y.6. 9. 6.Google Scholar
  6. 6.
    N.A. Stilwell and D. Tabor, “Elastic recovery of conical indentations,” Phys. Proc. Soc. 78 2, 1961, pp. 169–179.CrossRefGoogle Scholar
  7. 7.
    G.M. Pharr and A. Bolshakov, “Understanding indentation unloading curves,” J. Mater. Res. 17 10, 2002, pp. 2660–2671.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2004

Authors and Affiliations

  • Anthony C. Fischer-Cripps
    • 1
  1. 1.CSIROLindfieldAustralia

Personalised recommendations