Applications of Nanoindentation

  • Anthony C. Fischer-Cripps
Part of the Mechanical Engineering Series book series (MES)


Nanoindentation finds a wide application. The test results provide information on the elastic modulus, hardness, strain-hardening, cracking, phase transformations, creep, fracture toughness, and energy absorption. Since the scale of deformation is very small, the technique is applicable to thin surface films and surface modified layers. In many cases, the microstructural features of a thin film or coating differs markedly from that of the bulk material due to the presence of residual stresses, preferred orientations of crystallographic planes, and the morphology of the microstructure. The proceedings of annual symposiums are a rich source of information about the applications of nanoindentation. In this chapter, some rather straightforward examples of analysis of nanoindentation test data are presented using the methods described in the previous chapters.


Fracture Toughness Fuse Silica Thermal Barrier Coating Superhard Material Nanoindentation Test 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    D.M. Marsh, “Plastic flow in glass,” Proc. Roy. Soc. A279, 1964, pp. 420–435.CrossRefGoogle Scholar
  2. 2.
    A. Bendavid, P.J. Martin, and H. Takikawa, “Deposition and modification of titanium dioxide thin films by filtered arc deposition,” Thin Solid Films, 360, 2000, pp. 241–249.CrossRefGoogle Scholar
  3. 3.
    S. Veprek “The search for novel, superhard materials, ” J. Vac. Sci. Technol. A17 5, 1999, pp. 2401–2420.CrossRefGoogle Scholar
  4. 4.
    R.J. Hemley, H.K. Mao, P.M. Bell, and B.O. Mysen, “Raman-Spectroscopy of SiO2 glass at high pressure,” Phys. Rev. Lett. 57 6, 1986, pp. 747–750.CrossRefGoogle Scholar
  5. 5.
    F.L. Galeener, “Raman and ESR studies of the thermal history of amorphous SiO2,” J. Non-Cryst. Solids, 71, 1985, pp. 373–386.CrossRefGoogle Scholar
  6. 6.
    N.X. Randall, “Direct measurement of residual contact area and volume during the nanoindentation of coated materials as an alternative method of calculating hardness”, Phil. Mag. A, 82 10, 2002, pp. 1883–1892.CrossRefGoogle Scholar
  7. 7.
    E. Weppelmann, M. Whittling, M.V. Swain, and D. Munz, “Indentation cracking of brittle thin films on brittle substrates,” in Fracture Mechanics of Ceramics, Vol. 12, R.C. Bradt et al. eds., Plenum Press, N.Y., 1996.Google Scholar

Copyright information

© Springer Science+Business Media New York 2004

Authors and Affiliations

  • Anthony C. Fischer-Cripps
    • 1
  1. 1.CSIROLindfieldAustralia

Personalised recommendations