Abstract
As mentioned in Chapter two, digital wireless receivers require quadrature demodulation schemes to keep both amplitude and phase information of the received signal. Quadrature demodulation in digital domain was originally referred as quadrature sampling, a concept introduced by Grace and Pitt [1].
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
O.D. Grace and S.P. Pitt, “Quadrature sampling of high frequency waveforms,” J. Acoust. Soc. Amer., vol. 44, pp. 1453–1454, 1968.
J. L. Brown, “On quadrature sampling of bandpass signals,” IEEE Trans. on Aerospace and Electronic Systems, vol. AES-15, no. 3, pp. 366–371, May 1974.
W.M. Waters and B.R. Jarrett, “Bandpass signal sampling and coherent detection,” IEEE Trans. on Aerospace and Electronic Systems, vol 18, no. 4, pp. 731–736, Nov. 1982.
V. Considine, “Digital complex sampling,” IEE Electronics Letters, vol. 19, no. 16, pp. 608–609, 4th Aug. 1983.
Charles M. Rader, “A simple method for sampling in-phase and quadrature components,” IEEE Trans. on Aerospace and Electronic Systems, vol. AES-20, no. 6, pp. 821–824, Nov. 1984.
R.L. Mitchell, “Creating complex signal samples from a band-limited signal,” IEEE Trans. on Aerospace and Electronic Systems, vol. 25, no. 3, pp. 425–427, May 1989.
H. Liu, A. Ghafoor, and P.H. Stockmann, “A new quadrature sampling and processing approach,” IEEE Trans. on Aerospace and Electronic Systems, vol. 25, no. 5, pp. 733–747, Sept. 1989.
L.E. Pellon, “A double Nyquist digital product detector for quadrature sampling,” IEEE Trans. on Signal Processing, vol. 40, no. 7, pp. 1670–1681, July 1992.
V. Eerola, T. Ritoniemi, and H. Tenhunen, “Second-order sampling and oversampled A/D and D/A converters in digital data transmission,” in Proc. IEEE Int. Symposium on Circuits and Systems, 1991, vol. 3, pp. 1521–1524.
H. Tao and J.M. Khoury, “Direct-conversion bandpass DE modulator,” Electronics letters, vol. 33, no. 5, pp. 1282–1283, July 17th 1997.
H. Tao and J.M. Khoury, “A 100MHz IF, 400 MSample/s CMOS direct conversion bandpass DE modulator,” in Digest of Technical Papers, IEEE Int. Solid-State Circuit Conference, Feb. 1999, pp. 60–61.
Darwin T.S. Yim and Curtis C. Ling, “A 200-MHz CMOS I/Q down-converter,” IEEE Trans. Circuit and Systems-II, vol. 46, no. 6, June 1999.
S. Lindfors, M. L ansirinne, and K. Halonene, “A 2.7V 50MHz IF-sampling DS-modulator with +37dBV IIP3 for digital cellular phones,” in Proc. IEEE European Solid-State Circuits Conference, 2000.
T. Burger and Q. Huang, “A 13.5mW, 185MSample/s DE-modulator for UMTS/GSM dual-standard IF reception,” in Digest of Technical Papers, IEEE Int. Solid-State Circuit Conference, Feb. 2001, pp. 44–45.
C. Azeredo Lerne, Ricardo Reis, and Eduardo Viegas, “Wideband sub-sampling A/D conversion with image rejection,” in IEEE Workshop on Wireless Communication Circuits and Systems, Lucerne, Switzerland, June 1998.
D.W. Rice and K.H. Wu, “Quadrature sampling with high dynamic range,” IEEE Trans. on Aerospace and Electronic Systems, vol. AES-18, no. 4, pp. 736–739, Nov. 1982.
S. Jantzi, R. Schreier, and M. Snelgrove, “The design of bandpass DE ADCs,” in Delta-Sigma Data Converters, Theory, Design and Simulation, S. Norsworthy, R. Schreier, and G.C. Ternes, Eds., pp. 282–308. IEEE Press, 1997.
H.J. Dressler, “Interpolative bandpass A/D conversion-experimental results,” IEE Electron. Letters, vol. 26, no. 20, pp. 1652–1653, Sept. 1990.
A.M. Thurston, T.H. Pearce, and M.J. Hawksford, “Bandpass implementation of the sigma-delta A-D conversion technique,” Proc. IEE Int. Conference on A/D and D/A Conversion, Swansea, U.K., pp. 81–86, Sept. 1991.
S.A. Jantzi, W.M. Snelgrove, and P.F. Ferguson Jr., “A fourth-order bandpass sigma-delta modulator,” IEEE J. Solid-State Circuits, vol. 28, no. 3, pp. 282–291, March 1993.
G. Tröster et al., “An interpolative bandpass converter on a 1.2µm BiCMOS analog/digital array,” IEEE J. Solid-State Circuits, vol. 28, no. 4, pp. 471–477, April 1993.
L. Longo and B.R. Horng, “A 15b 30kHz bandpass sigma-delta modulator,” in Digest of Technical Papers, IEEE Int. Solid-State Circuit Conference, 1993, pp. 226–227.
J.E. Eklund and R. Arvidsson, “A multiple sampling, single A/D conversion technique for I/Q demodulation in CMOS,” IEEE J. Solid-State Circuits, vol. 31, no. 12, pp. 1987–1994, Dec. 1996.
J. A. C. Bingham, “Applications of a direct-transfer SC integrator,” IEEE Trans. Circuits and Systems, vol. CAS-31, pp. 419–420, 1984.
J.C. Rudell, J.J. Ou, et al., “A 1.9GHz wide-band IF double conversion CMOS receiver for cordless telephone application,” IEEE J. Solid-State Circuits, vol. 32, pp. 2071–2088, Dec 1997.
D.K. Weaver, “A third method of generation and detection of singlesideband signals,” Proc. IRE, vol. 44, pp. 1703–1705, Dec 1956.
P. Aziz, H. Sorensen, and J. Van der Spiegel, “Performance of complex noise transfer functions in bandpass and multi-band sigma delta systems,” in Proc. IEEE Int. Symposium on Circuits and Systems,1995, pp. 641644.
S.A. Jantzi et al., “Complex bandpass EA converter for digital radio,” in Proc. IEEE Int. Symposium on Circuits and Systems, May-June 1994, vol. 5, pp. 453–456.
S.A. Jantzi, K.W. Martin, and A. S. Sedra, “Quadrature bandpass DE modulation for digital radio,” IEEE J. Solid-State Circuits, vol. 32, no. 12, pp. 1935–1950, Dec. 1997.
A. Swaminathan, “A single-IF receiver architecture using a complex sigma-delta modulator,” M.S. thesis, Carleton University, Ottawa, Canada, 1997.
K.P. Pun, J.E. Franca, and C. Azeredo Lerne, “A quadrature sampling scheme with improved image rejection for complex IF receivers,” in IEEE Int. Symposium on Circuits and Systems, Sydney, Australia, May 2001.
D. G. Haigh and B. Singh, “A switching scheme for switched capacitor filters which reduces the effect of parasitic capacitances associated with switch control terminals,” in Proc. IEEE Int. Symposium on Circuits and Systems, 1983, vol. 2, pp. 586–589.
K. Suyama and S.C. Fang, User’s Manual for SWITCAP2 version 1.1, Columbia University, 1992.
Y. Matsuya, K. Uchimura, A. Iwata, et al., “A 16-bit oversampling A-toD conversion technology using triple-integration noise shaping,” IEEE J. Solid-State Circuits, vol. 22, pp. 921–929, Dec. 1987.
The Math Works Inc., User’s guide, MATLAB 5, 1996.
K.P. Pun, J.E. Franca, and C. Azeredo Lerne, “A switched-capacitor image rejection filter for complex IF receivers,” in Proc. IEEE Asia-Pacific Conference on Circuits and Systems, Tianjin, China, Dec. 2000.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Pun, KP., da Franca, J.E., Azeredo-Leme, C. (2003). Precise Quadrature Signal Generation by Sampling. In: Circuit Design for Wireless Communications. The Springer International Series in Engineering and Computer Science, vol 728. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-3737-0_5
Download citation
DOI: https://doi.org/10.1007/978-1-4757-3737-0_5
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-5349-0
Online ISBN: 978-1-4757-3737-0
eBook Packages: Springer Book Archive