Advertisement

Nonequilibrium Heating of Powders Under Shock Loading

  • Vitali F. Nesterenko
Chapter
Part of the High-Pressure Shock Compression of Condensed Matter book series (SHOCKWAVE)

Abstract

Nonequilibrium heat release in powders under shock loading is strongly coupled with viscoplastic nonuniform material flow during the densification process (see Chapter 2). At the same time, the essential difference in time scales for mechanical and thermodynamical equilibrium for relatively large particles makes possible the decoupling of mechanical processes on the stage of compaction and the subsequent phenomena connected with heat diffusion. This is also possible due to the weak dependence of shock macroparameters on the details of energy release.

Keywords

Shock Wave Boron Nitride Shock Front Shock Compression Shock Pressure 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Attetkov, A.V., Vlasova, L.N., Selivanov, V.V., and Solov’ev, V.S. (1984a) Local Heating of a Material in the Vicinity of a Pore upon its Collapse. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, 25, no. 2, pp. 128–132 (in Russian). English translation: Journal of Applied Mechanics and Technical Physics, September 1984, pp. 286–291.Google Scholar
  2. Attetkov, A.V., Vlasova, L.N., Selivanov, V.V., and Solov’ev, V.S. (1984b) Effect of Nonequilibrium Heating on the Behavior of a Porous Material in Shock Compression. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, 25, no. 6, pp. 120–127 (in Russian). English translation: Journal of Applied Mechanics and Technical Physics, May 1985, pp. 914–921.Google Scholar
  3. Attetkov, A.V., Vlasova, L.N., and Solov’ev, V.S. (1986) The Influence of the Structural Peculiarities on the Shock Compressibility of Porous Media. In: Procedeengs of IX International Conference on High Energy Rate Fabrication (Edited by V.F. Nesterenko and I.V. Yakovlev). Lavrentyev Institute of Hydrodynamics, Special Design Office of High-Rate Hydrodynamics, Novosibirsk, pp. 136–140 (in Russian).Google Scholar
  4. Attetkov, A.V., and Solov’ev, V.S. (1987) Heterogeneous Explosive Decomposition in a Weak Shock Wave. Fizika Goreniya i Vzryva, July-August, 23, no. 4, pp. 113–125 (in Russian). English translation: Combustion, Explosion, and Shock Waves, 1988, 23, January, pp. 482–491.Google Scholar
  5. Attetkov, A.V., and Solov’ev, V.S. (1989) On Mechanism of Thermal Dissipation under Shock Compression of Porous Material. In: Procedeengs of International Seminar on High-Energy Working of Rapidly Solidified Materials and High-Tc Ceramics (Edited by V.F. Nesterenko and A.A. Shtertzer). Special Design Office of High-Rate Hydrodynamics, Institute of Theoretical and Applied Mechanics, Novosibirsk, pp. 191–195 (in Russian).Google Scholar
  6. Baer, M.R. (1997) Continuum Mixture Modeling of Reactive Porous Media. In: High-Pressure Shock Compression of Solids IV. Response of Highly Porous Solids to Shock Loading (Edited by L. Davison, Y. Horie, and M. Shahinpoor). Springer-Verlag, New York, pp. 63–82.CrossRefGoogle Scholar
  7. Bakanova, A.A., Dudoladov, LP., and Sutulov, Yu.N. (1974) The Shock Compressibility of Porous Tungsten, Molybdenum, Copper and Aluminum in the Range of Low Shock Pressures. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, 15, no. 2, pp. 117–122 (in Russian). English translation: Journal of Applied Mechanics and Technical Physics, 1975, October, pp. 241–245.Google Scholar
  8. Batsanov, S.S. (1994) Effect of Explosions on Materials. Springer-Verlag, New York.Google Scholar
  9. Batsanov, S.S., Marquis, F.D.S., and Meyers, M.A. (1995) Shock Induced Synthesis of Suicides. In Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena (Edited by Murr L.E., Staudhammer K.P., and Meyers M.A.). Elsevier Science, Amsterdam, pp. 715–722.Google Scholar
  10. Batsanov, S.S. (1996) Solid-Phase Reactions in Shock Waves: Kinetic Studies and Mechanisms. Fizika Goreniya i Vzryva, January-February, 32, no. 1, pp. 115–128 (in Russian). English translation: Combustion, Explosion, and Shock Waves, 1996, 32, no. 1, pp. 102–113.Google Scholar
  11. Baum, F.A., Orlenko, L.P., and Stanyukovich, K.P. et al. (1975) Physics of Explosion. Nauka, Moscow (in Russian).Google Scholar
  12. Belyakov, G.V., Livshits, I.D., and Rodionov, V.N. (1974) Shock Deformation of Heterogeneous Media Modeled by the Set of Steel Spheres. Izvestiya Akademii Nauk SSSR, Fizika Zemli, no. 10, pp. 92–95 (in Russian).Google Scholar
  13. Belyakov, G.V., Rodionov, V.N., and Samosadnui, V.P. (1977) Heating of Porous Material under Impact Compression. Fizika Goreniya i Vzryva, 13, no. 4, pp. 614–619 (in Russian). English translation: Combustion, Explosion, and Shock Waves, 1978, February, pp. 524–528.Google Scholar
  14. Bennett, L.S., Hone, Y., and Hwang, M.M. (1994) Constitutive Model of Shock- Induced Chemical Reactions in Inorganic Powder Mixtures. Journal of Applied Physics, 76, no. 6, pp. 3394–4402.ADSCrossRefGoogle Scholar
  15. Bennett, L.S., Tanaka, K., and Hone, Y. (1997) Developments in Constitutive Modeling of Shock-Induced Reactions in Powder Mixtures. In: High-Pressure Shock Compression of Solids IV Response of Highly Porous Solids to Shock Loading (Edited by L. Davison, Y. Hone, and M. Shahinpoor). Springer-Verlag, New York, pp. 105–142.CrossRefGoogle Scholar
  16. Benson, D.J. (1994) An Analysis by Direct Numerical Simulation of the Effects of Particle Morphology on the Shock Compaction of Copper Powder. Modelling Simul Mater. Sci. Eng., 2, pp. 535–550.ADSCrossRefGoogle Scholar
  17. Benson, DJ. (1995) A Multi-Material Eulerian Formulation for the Efficient Solution of Impact and Penetration Problems. Computational Mechanics, 15, pp. 558–571.ADSzbMATHCrossRefGoogle Scholar
  18. Benson, D.J., Tong, W., and Ravichandran, G. (1995) Particle-Level Modeling of Dynamic Consolidation of Ti-SiC Powders. Modelling and Simulation in Materials Science and Engineering, 3, no. 6, pp. 771–796.ADSCrossRefGoogle Scholar
  19. Benson, DJ., Nesterenko, V.F., and Jonsdottir, F. (1995) Numerical Simulations of Dynamic Compaction. In Net Shape Processing of Powder Materials, AMD-216 (Edited by S. Krishnaswami, R.M. McMeeking, and J.R.L. Trasonas). ASME, New York, pp. 1–8.Google Scholar
  20. Benson, D.J., Nesterenko, V.F., Jonsdottir, F., and Meyers, M.A. (1997) Quasistatic and Dynamic Regimes of Granular Material Deformation Under Impulse Loading. Journal of the Mechanics and Physics of Solids, 45, nos. 11/12, pp. 1955–1999.ADSzbMATHCrossRefGoogle Scholar
  21. Blackburn, J.H., and Seely, L.B. (1962) Source of the Light Recorded in Photographs of Shocked Granular Pressing. Nature, 194, April 28, pp. 370–371.ADSCrossRefGoogle Scholar
  22. Blackburn, J.H., and Seely, L.B. (1964) Light Emitted from Shocked Granular Sodium Chlorides in a Vacuum. Nature, 202, April 18, pp. 276–277.ADSCrossRefGoogle Scholar
  23. Bogachev, G.A. (1973) Calculation of the Shock-Wave Adiabats for Some Heterogeneous Mixtures. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, no. 4, pp. 130–137 (in Russian). English translation: Journal of Applied Mechanics and Technical Physics, 1975, February, pp. 546–552.Google Scholar
  24. Bogachev, G.A., and Nikolaevskii, V.N. (1976) Shock Waves in Materials Mixture. Hydrodynamic Approximation. Mechanics of Liquid and Gas, no. 4, pp. 113–130 (in Russian).Google Scholar
  25. Bondar, M.P., and Nesterenko, V.F. (1991) Strain Conelation at Different Structural Levels for Dynamically Loaded Hollow Copper Cylinders. Journal de Physique IV (Colloque C3), 1, supplement au Journal de Physique HI, pp. 163–170.Google Scholar
  26. Boyle, V.M., and Pilarski, D.L. (1981) Shock Ignition Sensitivity of Multiply- Shocked Pressed TNT. In: Proceedings of the 7th Symposium (International) on Detonation. Office of Naval Research, NSWC MP 82–334, pp. 906–913.Google Scholar
  27. Carlson, R.J., Porembka, S.W., and Simons, C.C. (1966) Explosive Compaction of Ceramic Materials. Ceramic Bull, 45, no. 3, pp. 266–270.Google Scholar
  28. Carroll, M.M., and Holt, A.C. (1972) Static and Dynamic Pore-Collapse Relations for Ductile Porous Materials. J. Appl. Phys. 43, pp. 1626–1635.ADSCrossRefGoogle Scholar
  29. Carroll, M.M., Kim, K.T., and Nesterenko, V.F. (1986) The Effect of Temperature on Viscoplastic Pore Collapse. Journal of Applied Physics, 59, no. 6, pp. 1962–1967.ADSCrossRefGoogle Scholar
  30. Carslaw, H.S., and Jaeger, J.C. (1988) Conduction of Heat in Solids, Clarendon Press, Oxford.zbMATHGoogle Scholar
  31. Cooper, S.R., Benson, D.J., and Nesterenko, V.F. (2000) The Role of Void Geometry on the Mechanics of Void Collapse and Hot Spot Formation in Ductile Materials. Int. Journal of Plasticity, 16, pp. 525–540.zbMATHCrossRefGoogle Scholar
  32. Davies, H.A. (1978) Rapid Quenching Techniques and Formation of Metallic Glasses. In: Rapidly Quenched Metals III: Proceedings of the Third International Conference on Rapidly Quenched Metals, Vol. 1 (Edited by B. Cantor). Metals Society, London, pp. 1–21.Google Scholar
  33. Deribas, A.A., Staver, A.M., Stertser, A.A. et al. (1977) Explosive Compression of Steel and Copper Powder Mixtures. Izvestiya Sibirskogo Otdeleniya Akademii Nauk SSSR, Seriya Tekhn Nauk, 1, no. 3, pp. 45–50 (in Russian).Google Scholar
  34. Dianov, M.D., Zlatin, N.A., Mochalov, S.M. et al. (1976) The Shock Compressibility of Dry and Water Saturated Sand. Letters to Journal of Technical Physics, 2, no. 12, pp. 529–532 (in Russian).Google Scholar
  35. Dianov, M.D., Zlatin, N.A., Pugachev, G.S., and Rosomaho, L.H. (1979) The Shock Compressibility of Finely Dispersed Media. Letters to Journal of Technical Physics, 5, no. 11, pp. 692–694 (in Russian).Google Scholar
  36. Dremin, A.N., and Karpuhin, I.A. (1960) Method of Determination of Shock Adiabats of Disperse Materials. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, no. 3, pp. 184–188 (in Russian).Google Scholar
  37. Drumheller, D.S. (1987) Hypervelocity Impact of Mixtures. Int. J. Impact Engng., 5, pp. 261–268.CrossRefGoogle Scholar
  38. Drumheller, D.S. (1987) A Theory for Dynamic Compaction of Wet Porous Solids. Int. J. Solids Structures, 5, pp. 261–268.Google Scholar
  39. Dunin, S.Z., and Surkov, V.V. (1982) Effects of Energy Dissipation and Melting on Shock Compression of Porous Bodies. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, 23, no. 1, pp. 131–142 (in Russian). English translation: J. Appl. Mech. and Tech. Phys., July, 1982, pp. 123–134.Google Scholar
  40. Flinn, J.E., Williamson, R.L., Berry, R.A., Wright, R.N. et al. (1988) Dynamic Consolidation of Type 304 Stainless-Steel Powders in Gas Gun Experiments. Journal of Applied Physics, 64, no. 3, pp. 1446–1456.ADSCrossRefGoogle Scholar
  41. Friend, CM., and MacKenzie, P.J. (1987) Fabrication of Multi-Laminar Metallic Glass/Aluminium Composites by Explosive Compaction. J. Mater. Sci., 6, no. 1, pp. 103–105.Google Scholar
  42. Gao, J., Shao, B., and Zhang, K. (1991) A Study of the Mechanism of Consolidating Metal Powder Under Explosive-Implosive Shock Waves. J. Appl. Phys. 69, no. 11, pp. 7547–7555.ADSCrossRefGoogle Scholar
  43. Gourdin, W.H. (1984a) Microstructure and Deformation in a Dynamically Compacted Copper Powder. Mater. Sci. Eng., 67, pp. 179–184.CrossRefGoogle Scholar
  44. Gourdin, W.H. (1984b) Energy Deposition and Microstructural Changes in Dynamically Consolidated Metal Powders. J. Appl. Phys., 55, no. 1, pp. 172–181.ADSCrossRefGoogle Scholar
  45. Gourdin, W.H. (1986) Dynamic Consolidation of Metal Powders. Progress in Materials Science, 30, pp. 39–80.CrossRefGoogle Scholar
  46. Graham, R.A. (1993) Solids Under High-Pressure Shock Compression, Springer- Verlag, New York.CrossRefGoogle Scholar
  47. Graham, R.A. (1997) Comments on Shock Compression Science in Highly Porous Solids. In: High-Pressure Shock Compression of Solids IV. Response of Highly Porous Solids to Shock Loading (Edited by L. Davison, Y. Horie, and M. Shahinpoor). Springer-Verlag, New York, pp. 1–21.CrossRefGoogle Scholar
  48. Heczko, O., and Ruuskanen, P. (1993) Magnetic Properties of Compacted Alloy Fe73.5CulNb3Sil3.5B9 in Amorphous and Nanocrystalline State. IEEE Transactions on Magnetics, 29, no. 6, pt. 1, pp. 2670–2672.ADSCrossRefGoogle Scholar
  49. Heczko, O., Ruuskanen, P., Kraus, L., and Haslar, V. (1994) Study of Magnetization in Compacted Amorphous and Nanocrystalline Alloy Fe73.5CulNb3Sil3.5B9. IEEE Transactions on Magnetics, 30, no. 2, pt. 2, pp. 513–515.ADSCrossRefGoogle Scholar
  50. Hofmann, R., Andrews, D.J., and Maxwell, D.E. (1968) Computed Shock Response of Porous Aluminum. J. Appl Phys., 39, no. 10, pp. 4555–4562.ADSCrossRefGoogle Scholar
  51. Horie, Y. (1995) Mass Mixing and Nucleation and Growth of Chemical Reactions in Shock Compression of Powder Mixtures. In: Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, Proceedings of the 1995 International Conference (Edited by L.E. Murr, K.P. Staudhammer, and M.A. Meyers). Elsevier, Amsterdam, pp. 603–614.Google Scholar
  52. Howe, P., Frey, R., and Boyle, V. (1976) Shock Initiation and the Critical Energy Concept. In: Proceedings of the 6th Symposium (International) on Detonation. Office of Naval Research ACR-221, pp. 11–20.Google Scholar
  53. Howe, P.M. (2000) Explosive Behaviors and the Effects of Microstructure. In: Solid Propellant Chemistry, Combustion, and Motor Interior Ballistics (Edited by V. Yang, T.B. Brill, and W.Z. Ren). Progress in Astronautics and Aeronautics. American Institute of Aeronautics and Astronautics. Reston, VA, Vol. 185, Chapter 1.6.Google Scholar
  54. Ishutkin, S.N., Kuzmin, G.E., and Pai, V.V. (1986) Thermocouple Measurements of Temperature in the Shock Compression of Metals. Fizika Goreniya i Vzryva, 22, no. 5, pp. 96–104 (in Russian). English translation: Combustion, Explosion, and Shock Waves. 1987, March, pp. 582–589.Google Scholar
  55. Iyer, K.R., Bennett, L.S., Sorrell, F.Y., and Horie, Y. (1994) Solid State Chemical Reactions at the Shock Front. In: High-Pressure Science and Technology—1993. Joint International Association for Research and Advancement of High Pressure Science and Technology and American Physical Society Topical Group on Shock Compression of Condensed Matter Conference (Edited by S.C. Schmidt, J.W. Shaner, G.A. Samara, and M. Ross). AIP Press, New York, no. 309, pt. 2, pp. 1337–1340.Google Scholar
  56. Kasiraj, P., Vreeland, T. Jr., Schwarz, R.B., and Ahrens TJ. (1984) Shock Consolidation of a Rapidly Solidified Steel Powder. Acta Metall, 32, no. 8, pp. 1235–1241.CrossRefGoogle Scholar
  57. Khasainov, B.A., Borisov, A.A., Ermolaev, B.S., and Korotkov, A.I. (1980) The Model of Shock-Wave Initiation of Detonation in High Density Explosives. In: Chemical Physics of Combustion and Explosion Processes: Detonation, Institute of Chemical Physics, Chernogolovka, pp. 52–55.Google Scholar
  58. Kleiman, J., Heinmann, R.B., Hawken, D., and Salansky, N.M. (1984) Shock Compression and Flash Heating of Graphite/Metal Mixture at Temperatures up to 3200 K and Pressures up to 25 GPa. J. Appl. Phys., 56, no. 5, pp. 1440–1454.ADSCrossRefGoogle Scholar
  59. Kondo, Ken-ichi, Soga, S., Sawaoka, A., and Araki, M. (1985) Shock Compaction of Silicon Carbide Powder. J. Mater. Sci. 20, pp. 1033–1048.ADSCrossRefGoogle Scholar
  60. Krueger, B.R., Mutz, A.H., and Vreeland, T. (1992) Shock-Induced and Self- Propagating High-Temperature Synthesis Reactions in Two Powder Mixtures: 5:3 Atomic Ratio Ti/Si and 1:1 Atomic Ratio Ni/S. Metallurgical Transactions A, 23A, no. 1, pp. 55–58.ADSCrossRefGoogle Scholar
  61. Krueger, B.R., Mutz, A.H., and Vreeland, T. Jr. (1991) Correlation of Shock Initiated and Thermally Initiated Chemical Reactions in a 1:1 Atomic Ratio Nickel-Silicon Mixture. Journal of Applied Physics, 70, no. 10, pt. 1, pp. 5362–5368.ADSCrossRefGoogle Scholar
  62. Krueger, B.R., and Vreeland, T. Jr. (1991) A Hugoniot Theory for Solid and Powder Mixtures. Journal of Applied Physics, 69, no. 2, pp. 710–716.ADSCrossRefGoogle Scholar
  63. Kusubov, A.S., Nesterenko, V.F., Wilkins, M.L., Reaugh, J.E., and Cline, C.F. (1989) Dynamic Deformation of Powdered Materials as a Function of Particle Size. In: Proc. International Seminar on High-Energy Working of Rapidly Solidified Materials and High-Tc Ceramics (Edited by V.F. Nesterenko and A.A. Shtertzer). Special Design Office of High-Rate Hydrodynamics, Institute of Theoretical and Applied Mechanics, Novosibirsk, pp. 139–156 (in Russian).Google Scholar
  64. Matytsin, A.I., and Popov, S.T. (1987) Determination of the Brightness Temperature with Emergence of a Shock Wave from Powder onto the Boundary with Transparent Barrier. Fizika Goreniya i Vzryva, May-June, 23, no. 3, pp. 126–132 (in Russian). English translation: Combustion, Explosion, and Shock Waves, 1987, November, pp. 364–369.Google Scholar
  65. Meyers, M.A., Gupta, B.B., and Murr, L.E. (1981) Shock-Wave Consolidation of Rapidly Solidified Superalloy Powders. Journal of Metals, October, pp. 21–26.Google Scholar
  66. Meyers, M.A. (1994) Dynamic Behavior of Materials. Wiley, New York, Ch. 17, pp. 616–636.zbMATHCrossRefGoogle Scholar
  67. Meyers, M.A., Benson, D.J., and Olevsky, E.A. (1999) Shock Consolidation: Microstructurally-Based Analysis and Computational Modeling. Acta Mater., 47, no. 7, pp. 2089–2108.CrossRefGoogle Scholar
  68. Molotkov, A.V., Notkin, A.B., Elagin, D.V., Nesterenko, V.F., and Lazaridi, A.N. (1991) Microstructure after Heat Treatment for Explosive Compacts Made from Granules of Rapidly Quenched Titanium Alloys. Fizika Goreniya i Vzryva, 27, no. 3, pp. 117–126 (in Russian). English translation: Combustion, Explosion, and Shock Waves, November 1991, pp. 377–384.Google Scholar
  69. Moriarty, J.A. (1986) High-Pressure Ion-Thermal Properties of Metals from AB Initio Interatomic Potentials. In: Proceedings of the American Physical Society Topica Conference “Shock Waves of Condensed Matter” (Edited by Y.M. Gupta). Plenum Press, New York, pp. 101–106.CrossRefGoogle Scholar
  70. Morris, D.G. (1981) Melting and Solidification During Dynamic Compaction of Tool Steel. Metal Sci., March, pp. 116–124.Google Scholar
  71. Morris, D.G. (1982) Rapid-Solidification Phenomena. Metal Sci., October, pp. 457–466.Google Scholar
  72. Mutz, A.H., and Vreeland, T., Jr., (1993) Thermoelectric Measurements of Energy Deposition During Shock-Wave Consolidation of Metal Powders of Several Sizes. J.Appl. Phys., 73, no. 10, pp. 4862–4868.ADSCrossRefGoogle Scholar
  73. Muz, A.H. (1992) PhD thesis, California Institute of Technology, Pasadena, CA.Google Scholar
  74. Nemat-Nasser, S., Okinaka, T., Nesterenko, V.F., and Liu, M. (1998) Dynamic Void Collapse in Crystals: Computational Modeling and Experiments, Phil Mag., 78, no. 5, pp. 1151–1174.Google Scholar
  75. Nesterenko, V.F. (1974) Electrical Phenomena Under Shock Loading of Metals and Their Connection With Shock Wave Parameters. PhD thesis, Lavrentyev Institute of Hydrodynamics, Russian Academy of Sciences, Siberian Branch, Novosobirsk.Google Scholar
  76. Nesterenko, V.F., and Staver, A.M. (1974) Temperature Determination for Shock Loading of a Metal Interface. Fizika Goreniya i Vzryva, 10, no. 6, pp. 904–907 (in Russian). English translation: Combustion, Explosion, and Shock Waves. March 1976, pp. 811–813.Google Scholar
  77. Nesterenko, V.F. (1975) Electrical Effects in Shock Loading of Metal Contacts. Fizika Goreniya i Vzryva, 11, no. 3, pp. 444–456 (in Russian). English translation: Combustion, Explosion, and Shock Waves. July 1976, pp. 376–385.Google Scholar
  78. Nesterenko, V.F. (1976) The Thermodynamics of Shock Compaction of Powders. In: Proceedings of III International Symposium on Metal Explosive Working, Marianske Lazni, Chehoslovakia, Semtin, Pardubice, Chehoslovakia, Vol. 2, pp. 419–432 (in Russian).Google Scholar
  79. Nesterenko, V.F. (1977) Shock Compression of Multicomponent Materials. Dynamics of Continua. Mechanics of Explosive Processes, 29, pp. 81–93 (in Russian).Google Scholar
  80. Nesterenko, V.F., and Muzykantov, A.V. (1985) Evaluation of Conditions for Retaining an Amorphous Material Structure During Consolidation by Explosion. Fizika Goreniya i Vzryva, 21, no. 2, pp. 120–126 (in Russian). English translation: Combustion, Explosion, and Shock Waves, September 1985, pp. 240–245.Google Scholar
  81. Nesterenko, V.F. (1985) Potential of Shock-Wave Methods for Preparing and Compacting Rapidly Quenched Materials. Fizika Goreniya i Vzryva, 21, no. 6, 85–98 (in Russian). English translation: Physics of Explosion, Combustion and Shock Waves, 1986, May, pp. 730–740.Google Scholar
  82. Nesterenko, V.F. (1986) Heterogeneous Heating of Porous Materials at Shock Wave Loading and Criteria of Strong Compacts. In: Procedeengs of IX International Conference on High Energy Rate Fabrication (Edited by V.F. Nesterenko and I.V. Yakovlev). Lavrentyev Institute of Hydrodynamics, Special Design Office of High-Rate Hydrodynamics, Novosibirsk, pp. 157–163 (in Russian).Google Scholar
  83. Nesterenko, V.F. et al., (1987) Explosive Consolidation of Rapidly Solidified Materials for Electromagnetic Applications. Final Report #GR 01860022255, Special Design Office of High-Rate Hydrodynamics. Siberian Branch of the USSR Academy of Sciences, Novosibirsk, 62 pp.Google Scholar
  84. Nesterenko, V.F. (1988) Non-linear Phenomena Under Impulse Loading of Heterogeneous Media. Dissertation for Doctor’s Degree in Physics and Mathematics. Lavrentyev Institute of Hydrodynamics, Russian Academy of Sciences, Siberian Branch, Novosibirsk, 370 pp.Google Scholar
  85. Nesterenko, V.F., Panin, V.E., Kulkov, S.N., and Melnikov, A.G. (1992) Modification of Submicron Ceramics under Pulse Loading. High Pressure Research, 10, pp. 791–795.ADSCrossRefGoogle Scholar
  86. Nesterenko, V.F. (1992) High-Rate Deformation of Heterogeneous Materials. Nauka, Novosibirsk.Google Scholar
  87. Nesterenko, V.F., Bondar, M.P., and Ershov, I.V. (1994) Instability of Plastic Flow at Dynamic Pore Collapse. In: High-Pressure Science and Technology—1993. Joint International Association for Research and Advancement of High Pressure Science and Technology and American Physical Society Topical Group on Shock Compression of Condensed Matter Conference (Edited by S.C. Schmidt, J.W. Shaner, G.A. Samara, and M. Ross). AIP Press, New York, no. 309, pt. 2, pp. 1173–1176.Google Scholar
  88. Nesterenko, V.F., Meyers, M.A., and Wright, T.W. (1998) Self-Organization in the Initiation of Adiabatic Shear Bands. Acta Materialia, 46, no. 1, pp. 327–340.CrossRefGoogle Scholar
  89. Nigmatullin, R.I., Vainshtein, P.B. et al. (1976) Computer Modeling of Physico- Chemical Processes and Shock Wave Propagation in Solids and Composite Materials. Computer Methods in Mechanics of Continuum Media, 7, no. 2, pp. 89–108 (in Russian).Google Scholar
  90. Nikolaevskii, V.N. (1969) Hydrodynamic Analysis of Shock Adiabats of Heterogeneous Mixtures of Substances. Zhurnal Prikladnoi Mekhaniki i Tehknicheskoi Fiziki, no. 3, pp. 82–88 (in Russian). English translation: Journal of Applied Mechanics and Technical Physics, 1969, May-June, pp. 406–411.Google Scholar
  91. Rakhimov, A.E. (1993) Optical Microstructure of Explosively Compacted Ribbon Toroids from Fe-based Amorphous Alloy. J. Mater. Sci. Lett., 12, pp. 1891–1893.CrossRefGoogle Scholar
  92. Raybould, D. (1980) The Cold Welding of Powders by Dynamic Compaction. Int. J. Powder Metallurgy and Powder Technology, 16, no. 1, pp. 1–10.Google Scholar
  93. Raybould, D. (1981) The Properties of Stainless Steel Compacted Dynamically to Produce Cold Interparticle Welding. J. Mat. Sci., 16, pp. 589–598.ADSCrossRefGoogle Scholar
  94. Raybould, D. (1982) Wear-resistant Al-Steel-Pb Admixed Alloys Produced by Dynamic Compaction. Powder Metallurgy, 25, no. 1, pp. 35–41.Google Scholar
  95. Raybould, D. (1987) Cold Dynamic Compaction of Pre-Alloyed Titanium and Activated Sintering. In: New Perspective in Powder Metallurgy (Fundamentals, Methods, and Applications), vol. 8, Powder Metallurgy for Full Density Products. Metal Powder Industries Federation, Princeton, NJ, pp. 575–589.Google Scholar
  96. Roman, O.V., Nesterenko, V.F., and Pikus, I.M. (1979) Influence of the Powder Particle Size on the Explosive Pressing. Fizika Goreniya i Vzryva, 15, no. 5, pp. 102–107 (in Russian). English translation: Combustion, Explosion, and Shock Waves, March 1980, pp. 644–649.Google Scholar
  97. Schilperoord, A.A. (1976) A Simple Model for the Simulation of the Initiation of Detonation by a Shock Wave in Heterogeneous Explosive. In Procedeengs of the 6th Symposium (International) on Detonation. Office of Naval Research ACR-221, pp. 371–380.Google Scholar
  98. Schwarz, R.B., Kasiraj, P., Vreeland, T. Jr., and Ahrens T.J. (1984) A Theory for the Shock-Wave Consolidation of Powders. Acta Metall, 32, no. 8, pp. 1243–1252.CrossRefGoogle Scholar
  99. Schwarz, R.B., Kasiraj, P., Vreeland, T. Jr. (1986) Temperature Kinetics During Shock-Wave Consolidation of Metallic Powders. In: Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena (Edited by L.E. Murr, K.S. Staudhammer, and M.A. Meyers). Marcel Dekker, New York, pp. 313–327.Google Scholar
  100. Sheffield, S.A., Gustavsen, R.L., and Anderson, M.U. (1997) Shock Loading of Porous High Explosives. In: High-Pressure Shock Compression of Solids IV. Response of Highly Porous Solids to Shock Loading (Edited by L. Davison, Y. Horie, and M. Shahinpoor). Springer-Verlag, New York, pp. 23–61.CrossRefGoogle Scholar
  101. Shvedov, K.K, Aniskin, A.I., Il’in, A.N., and Dremin, A.N. (1980) Detonation of Highly Diluted Porous Explosives. I. Effect of Inert Additives on Detonation Parameters. Fizika Goreniya i Vzryva, 16, no. 3, pp. 92–101 (in Russian). English translation: Combustion, Explosion, and Shock Waves, 1980, November, pp. 324–331.Google Scholar
  102. Staudhammer, K.P. (1999) Fundamental Temperature Aspects in Shock Consolidation of Metal Powders. In: Powder Materials: Current Research and Industrial Practices, (Edited by F.D.S. Marquis). The Minerals, Metals and Materials Society, Warrendale, PA, pp. 317–325.Google Scholar
  103. Staver, A.M. (1981) Metallurgical Effects Under Shock Compression of Powder Materials. In: Shock Waves and High-Strain-Rate Phenomena in Metals, Concepts and Applications (Edited by M.A. Meyers and L.E. Murr). Plenum Press, New York, pp. 865–880.CrossRefGoogle Scholar
  104. Staver, A.M., Kuzmin, G.E., and Nesterenko, V.F. (1982) Experimental Investigation of Shock Waves in Porous Media. In: Proceedings of II International Meeting on Materials Explosive Working (Edited by V.F. Nesterenko, G.E. Kuzmin, and I.V. Yakovlev). Lavrentyev Institute of Hydrodynamics, Novosibirsk pp. 150–156 (in Russian).Google Scholar
  105. Thadhani, N.N. (1993) Shock-Induced Chemical Reactions and Synthesis of Materials. Progress in Materials Science, 37, no. 2, pp. 117–226.CrossRefGoogle Scholar
  106. Thadhani, N.N. (1994) Shock-Induced and Shock-Assisted Solid-State Chemical Reactions in Powder Mixtures. Journal of Applied Physics, 76, no. 4, pp. 2129–2138.ADSCrossRefGoogle Scholar
  107. Thadhani, N.N., and Aizawa, T. (1997) Materials Issues in Shock-Compression- Induced Chemical Reactions in Porous Solids. In: High-Pressure Shock Compression of Solids IV. Response of Highly Porous Solids to Shock Loading (Edited by L. Davison, Y. Horie, and M. Shahinpoor). Springer-Verlag, New York, pp. 257–287.CrossRefGoogle Scholar
  108. Thadhani, N.N., Graham, R.A., Royal, T., Dunbar, E., Anderson, M.U., and Holman, G.T. (1997) Shock-Induced Chemical Reactions in Titanium-Silicon Mixtures of Different Morphologies: Time-Resolved Pressure Measurements and Materials Analysis. J. Appl. Phys. 82, no. 3, pp. 1113–1128.ADSCrossRefGoogle Scholar
  109. Thouvenin, J. (1966) Action d’une onde de choc sur un solide poreux. J. Physics, 27, nos. 3/4, pp. 183–189.CrossRefGoogle Scholar
  110. Tonkov, E.Yu. (1979) Phase Diagrams of Elements at High Pressures. Nauka, Moscow, (in Russian).Google Scholar
  111. Trebinski, R., and Wlodarczyk, E. (1987a) Estimation of the Local Value of the Temperature in a Shock Loaded Porous Body. J. Technical Physics, 28, no. 3, pp. 327–346.Google Scholar
  112. Trebinski, R., and Wlodarczyk, E. (1987b) A Method for Estimating the Local Temperature in a Shock Loaded Porous Medium. J. Technical Physics, 28, no. 4, pp. 431–450.Google Scholar
  113. Vreeland, T. Jr., Montilla, K., and Mutz, A.H. (1997) Shock Wave Initiation of the Ti5Si3 Reaction in Elemental Powders. Journal of Applied Physics, 82, no. 6, pp. 2840–2847.ADSCrossRefGoogle Scholar
  114. Vukcevic, M., Glisic, S., and Uskokovic, D. (1993) Dynamic Compaction of Al-Li-X Powder Obtained by a Rotating Electrode Process. Materials Science and Engineering, A168, pp. 5–10.CrossRefGoogle Scholar
  115. Williamson, R.L. and Berry, R.A. (1986) Microlevel Numerical Modeling of the Shock Wave Induced Consolidation of Metal Powders. In: Proceedings of the Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter (Edited by Y.M. Gupta). Plenum Press, New York, pp. 341–346.CrossRefGoogle Scholar
  116. Williamson, R.L., Wright, R.N., Korth, G.T., and Rabin, B.H. (1989) Numerical Simulation of Dynamic Consolidation of SiC Fiber-Reinforced Aluminum Composite. J. Appl. Phys. 66, no. 4, pp. 1826–1831.ADSCrossRefGoogle Scholar
  117. Williamson, R.L., and Wright, R.N. (1990) A Particle-Level Numerical Simulation of the Dynamic Consolidation of a Metal Matrix Composite Material. In: Proceedings of the American Physical Society Topical Conference “Shock Waves of Condensed Matter—1989 (Edited by S.C. Schmidt J.N. Johnson, and L.W. Davison). Elsevier Science, Amsterdam, pp. 487–490.Google Scholar
  118. Williamson, R.L. (1990) Parametric Studies of Dynamic Powder Consolidation Using a Particle-Level Numerical Model. J. Appl. Phys. 68, no. 3, pp. 1287–1296.ADSCrossRefGoogle Scholar
  119. Wlodarczyk, E., and Trebinski, R. (1989) On Estimating of the Local Value of Temperature in Shocked Granular Medium. In: Procedeengs of International Seminar on High-Energy Working of Rapidly Solidified Materials and High-Tc Ceramics (Edited by V.F. Nesterenko and A.A. Shtertzer). Special Design Office of High-Rate Hydrodynamics, Institute of Theoretical and Applied Mechanics, Novosibirsk, pp. 186–190 (in Russian).Google Scholar
  120. Zagarin, Yu.V., Kuz’min, G.E., and Yakovlev, I.V. (1989) Measurement of Pressure and Temperature with Shock Loading for Porous Composite Materials. Fizika Goreniya i Vzryva, 25, no. 2, pp. 129–133 (in Russian). English translation: Combustion, Explosion, and Shock Waves, 1989, September, pp. 248–251.Google Scholar
  121. Zolotarev, S.N., Denisova, O.N., Nesterenko, V.F., Pershin, S.A., and Lazaridi, A.N. (1989) Explosive Compacts from Amorphous Soft-Magnetic Alloys. In: Procedeengs of International Seminar on High-Energy Working of Rapidly Solidified Materials and High-Tc Ceramics (Edited by V.F. Nesterenko and A.A. Shtertzer). Special Design Office of High-Rate Hydrodynamics, Institute of Theoretical and Applied Mechanics, Novosibirsk, pp. 97–112 (in Russian).Google Scholar

Copyright information

© Springer Science+Business Media New York 2001

Authors and Affiliations

  • Vitali F. Nesterenko
    • 1
  1. 1.Department of Mechanical and Aerospace EngineeringUniversity of California at San DiegoLa JollaUSA

Personalised recommendations