Cereals pp 43-47 | Cite as

Biodegradable Coatings for Thermoplastic Starch

  • John W. Lawton


Over the last few years, there has been renewed interest in biodegradable plastics made from annually renewable, natural polymers such as starch (see Chapters 1, 2, 5 and 10). The fact that starch is receiving considerable attention is understandable, as it is totally biodegradable, is inexpensive compared to other biodegradable polymers, and is available in large quantities. However, starch-based materials and bio-plastics containing starch are only slowly being manufactured and marketed into consumer products, despite the advantages listed above. One reason for this is due to the hygroscopic nature of starch (Whisler and Hillbert, 1944). Starch that comes into contact with water can absorb water, thereby changing the properties of the starch-based material (Swanson et al, 1993). Even starch-based materials that do not come into direct contact with water can be affected by water. Changes in humidity affect the physical properties of starch (Perice, 1928; Lloyd and Kirst, 1963) and starch-based materials (Jasberg et al, 1992). Starch absorbs water under high humidity conditions and loses water under low humidity conditions. Since water is a good plasticizer for starch (Young, 1984; Donovan 1979), any change in the water content of the starch will change the properties of the starch-based article.


Interfacial Tension Surface Free Energy Vinyl Alcohol Peel Test Peel Strength 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. Bonnerup C and Gatenholm P (1993) “The effect of surface energetics and molecular interdiffusion on adhesion in multicomponent polymer systems.” J. Adhesion Sci. Technol. 7, 247CrossRefGoogle Scholar
  2. Carré A and Vial J (1993) “Simple method for the prediction of surface free energy and its components. Application to polymers.” J. Adhesion 42, 265CrossRefGoogle Scholar
  3. Doane WM, Swanson CL and Fanta GF (1992) In “Emerging Technologies for Materials and Chemicals from Biomass”, Ed. Rowell RM, Schultz TP and Naravan R. American Chemical Society p 197CrossRefGoogle Scholar
  4. Donovan JW (1979) “Phase transition of starch-water systems.” Biopolymers 18, 263CrossRefGoogle Scholar
  5. Haas F, Haas J and Tiefenbacher K (1994) “Process for producing biodegradable thin-walled starch-based mouldings.” PCT Int. Appl. WO 94/13734Google Scholar
  6. Jasberg BK, Swanson CL, Shogren RL and Doane WM (1992) “Effect of moisture on injection molded starchEAA-HDPE composites.” J. Polym. Mater. 9, 163Google Scholar
  7. Lawton JW and Fanta GF (1994) “Glycerol-plasticized films prepared from starch-poly(vinyl alcohol) mixtures: Effect of poly(ethylene-co-acrylic acid).” Carbohydr. Polym. 23, 275CrossRefGoogle Scholar
  8. Lawton JW (1995) “Surface energy of extruded and jet cooked starch.” Starch/Stärke 47, 62CrossRefGoogle Scholar
  9. Lloyd NE and Kirst LC (1963) “Some factors affecting the tensile strength of starch films.” Cereal Chem. 40, 154Google Scholar
  10. Odidi IO, Newton JM and Buckton G (1991) “The effect of surface treatment on the value of contact angles measured on a compressed powder surface.” Int. J. Pharm. 72, 43CrossRefGoogle Scholar
  11. Otey FH, Mark AM, Mehitretter CL and Russell CR (1974) “Starch-based film for degradable agricultural mulch.” Ind. Eng. Prod. Res. Develop. 13, 90CrossRefGoogle Scholar
  12. Perice FT (1928) “Influence of humidity on the elastic properties of starch film.” J. Textile Inst. 19, T237CrossRefGoogle Scholar
  13. Rowe, R.C.: (1989) “Binder-substrate interactions in granulation: A theoretical approach based on surface free energy and polarity.” Int. J. Pharm. 52, 149CrossRefGoogle Scholar
  14. Shogren, RL and Lawton JW (1996) “Enhanced water resistance of starch-based materials.” US Pat. Appl. Serial No. 0057/94Google Scholar
  15. Swanson CL, Shogren RL, Fanta GF and Iman SH (1993) “Starch-plastic materials — preparation, physical properties and biodegradability (A review of recent USDA research).” J. Environ. Polym. Degradation 1, 155CrossRefGoogle Scholar
  16. Whistler RL and Hilbert GE (1944) “Mechanical properties of film from amylose amylopectin and whole starch triacetates.” Ind. Eng. Chem. 36, 796CrossRefGoogle Scholar
  17. Wu S (1971) “Calculation of interfacial tension in polymer systems.” J. Polymer Sci. 34, 19Google Scholar
  18. Young AH (1984) “Fraction of starch.” In “Starch Chemistry and Technology 2ed.”, Ed. Whistler RL, Bemiller JN and Paschally EF, Academic Press, New YorkGoogle Scholar

Copyright information

© Springer Science+Business Media New York 1997

Authors and Affiliations

  • John W. Lawton
    • 1
  1. 1.Plant Polymer Research, National Center for Agricultural Utilization ResearchAgricultural Research Service, US Department of AgriculturePeoriaUSA

Personalised recommendations