Advertisement

Effectiveness of Acrylic Polymers in Water-Based Pigment Dispersions — A Taguchi Approach

  • Steven Y. Chan
Chapter

Abstract

Pigment dispersion is a critical step in manufacturing printing inks. Styrene/acrylic copolymers and acrylic polymers are the common water based resins used in the graphic arts industry to disperse pigments. While surfactants may aid in pigment dispersions, complete surfactant grind pigment dispersions are only used in special applications. In this paper, three styrene/acrylic copolymers and two acrylic polymers with molecular weight (Mn) ranging from 1,700 to 4,800 and 25,000 to 42,000 respectively were evaluated in pigment grinding. Carbon black was chosen as the pigment because black is one of the colors used in largest volume in printing inks. Original layout of the experiments will require a total of 4374 (61 × 36) trials to cover all the combinations that it intends to study. Instead, the Taguchi’s Orthogonal Array experimental design was employed. An L18 (21 × 37) design was chosen and modified as L18 (61 × 36). This technique enables us to study one factor at six levels and six factors at three levels each by performing eighteen experiments only. It was found that styrene/acrylic copolymers provide high jettness and gloss for the black grind. Acrylic polymers develop higher color strength than the copolymers. The pigment to binder ratio (range from 5/1 to 3/1) and grinding time (10 to 30 minutes) had no effect on the quality of the pigment dispersions. The resins studied are all effective within these constraints. The defoamer and surfactant used in this study showed an adverse effect on the dispersions.

Keywords

Orthogonal Array Binder Ratio Acrylic Polymer Color Strength Linear Graph 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Taguchi, G., and Konishi, S., Taguchi Methods, Orthogonal Arrays and Linear Graphs, Am. Supplier Institute, Inc., Michigan, (1987).Google Scholar
  2. 2.
    Taguchi, G., System of Experimental Designs, Am. Supplier Insitute, Inc., Michigan, (1988).Google Scholar
  3. 3.
    Ross, P.J., Taguchi Techniques for Quality Engineering, McGraw Hill Publishing Co., NY, (1988).Google Scholar
  4. 4.
    Asbeck, W.K., and Maurice, V.L., Critical Pigment Volume Relationships, Ind. Eng. Chem., 41(7), 1470–1475, (1949).CrossRefGoogle Scholar
  5. 5.
    Parfitt, G.D., Dispersions of Powders in Liquids; with Special Reference to Pigments, 3rd Ed., Applied Science Publisher, NJ, (1981).Google Scholar
  6. 6.
    Patton, T.C., Paint Flow and Pigment Dispersion, 2nd Ed., John Wiley & Sons, (1987).Google Scholar
  7. 7.
    Patton, T.C., Sieving, Pigment Handbook, Vol. III, Wiley-Interscience, NY, (1973).Google Scholar
  8. 8.
    ASTM Standard Test Method D1210–64, Test for Fineness of Dispersion of Pigment-Vehicle System, (1970).Google Scholar
  9. 9.
    Hunter, R.S., The Measurement of Appearance, John Wiley & Sons, NY, (1975).Google Scholar
  10. 10.
    Harrison, V.G.W., Definition and Measurement of Gloss, The Printing and Allied Trades Research Association, Cambridge, England, (1945).Google Scholar

Copyright information

© Springer Science+Business Media New York 1995

Authors and Affiliations

  • Steven Y. Chan
    • 1
  1. 1.Polymer Chemicals DivisionAir Products and Chemicals, Inc.AllentownUSA

Personalised recommendations