Global Routing

  • Naveed A. Sherwani


In the placement phase, the exact locations of circuit blocks and pins are determined. A netlist is also generated which specifies the required inter—connections. Space not occupied by the blocks can be viewed as a collection of regions. These regions are used for routing and are called as routing regions. The process of finding the geometric layouts of all the nets is called routing. Each routing region has a capacity, which is the maximum number of nets that can pass through that region. The capacity of a region is a function of the design rules and dimensions of the routing regions and wires. Nets must be routed within the routing regions and must not violate the capacity of any routing region. In addition, nets must not short—circuit, that is, nets must not intersect each other. The objective of routing is dependent on the nature of the chip. For general purpose chips, it is sufficient to minimize the total wire length. For high performance chips, total wire length may not be a major concern. Instead, we may want to minimize the longest wire to minimize the delay in the wire and therefore maximize its performance. Usually routing involves special treatment of such nets as clock nets, power and ground nets. In fact, these nets are routed separately by special routers.


Integer Program Minimum Span Tree Steiner Tree Grid Graph Design Style 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Springer Science+Business Media New York 1993

Authors and Affiliations

  • Naveed A. Sherwani
    • 1
  1. 1.Western Michigan UniversityUSA

Personalised recommendations