Abstract
When the design of a mechanical component is completed, it is usually documented in a drawing or a CAD file which specifies its geometric features, dimensions, tolerances, etc. In order for the design to be manufactured, a set of instructions are needed regarding the processes, equipment, and/or people to be involved in the manufacturing process. Such instructions are usually documented in an operation sheet or process plan (Fig. 4.1).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Chang T.C., Wysk R.A., An Introduction to Automated Process Planning Systems, Prentice Hall, Englewood Cliffs, New Jersey, 1985.
Niebel, B., A. Draper, and R. Wysk, Modern Manufacturing Process Engineering, McGraw-Hill, New York, 1989.
Suh, N.P., The Principles of Design, Oxford University Press, Oxford, U.K., 1990.
Chang, T.C., Expert Process Planning for Manufacturing, Addison-Wesley, Reading, MA, 1990.
Iwata, K., Y. Kakino, F. Oba, and N. Sugimura, “Development of Non-Part Family Type Computer Aided Production Planning System CIMS/PRO,” Advanced Manufacturing Technology, ed. P. Blake, North Holland Pub. Co., ( New York, 1980 ), pp. 171–184.
Joshi, S., and T.C. Chang, “CAD Interface for Automated Process Planning,” Proceedings of the 19th CIRP International Conference on Manufacturing Systems, Penn. State Univ., June 1987, pp. 45–53.
Lee, Y.C., and K.S. Fu, “Machine Understanding of CSG: Extraction and Unification of Manufacturing Features,” IEEE Computer Graphics and Applications (1987), pp. 20–32.
Ham, I., and C.Y. Liu, “Computer-Aided Process Planning: The Present and the Future,” Annals of the CIRP (Vol. 37, No. 2, 1988 ) 591–602.
Major, F., and W. Grottke, “Knowledge Engineering Within Integrated Process Planning Systems,” Robotics and Computer-Integrated Manufacturing (Vol. 3, No. 2, 1987 ), pp. 209–213.
Davies, B.J., “Application of Expert Systems in Process Planning,” Annals of the CIRP (Vol. 35, No. 2, 1986 ), 451–453.
Phillips, R., and V. Arunthavanathan, “An Intelligent Design and Process Planning System,” Proceedings of the 19th CIRP International Conference on Manufacturing Systems, Penn. State Univ., June 1987, pp. 17–22.
Descotte, Y., and J.C. Lacombe, “GARI: A Problem Solver That Plans How to Machine Mechanical Parts,” Proceedings of the 7th International Joint Conference on Artificial Intelligence, Vancouver, Canada, August 1981, pp. 766–772.
Gupta, T.B., and K. Ghosh, “Survey of Expert Systems in Manufacturing and Process Planning,” Computers in Industry (Vol. 11, No. 2, Jan 1989 ), pp. 195–204.
Berenji, H.R., and B. Khoshnevis, “Use of Artificial Intelligence in Automated Process Planning, ” Computers in Mechanical Engineering (Vol. 5, No. 2, 1986 ), pp. 47–55.
Sluga, A., P. Butala, N. Lavrac, and M. Gams, “Attempt to Implement Expert System Techniques in CAPP,” Robotics and Computer-Integrated Manufacturing (Vol. 4, No. 1–2, 1988 ), pp. 77–82.
Milacic, V., and M. Kalajdzic, “Logical Structure of Manufacturing Process Design–Fundamentals of an Expert System for Manufacturing Process Planning,” Proceedings of the 16th CIRP International Conference on Manufacturing Systems, Tokyo, Japan, July 1984, pp. 93–101.
Hummel, K.E., “The XCUT Process Planning Project,” CAM-I Meeting Report M-87-PPP-02, March 1987, pp. 1–23.
Inui, M., A. Kinosada, H. Suzuki, F. Kimura, and T. Sata, “Automated Process Planning for Sheet Metal Parts With Bending Simulation,” Proceedings of the ASME Winter Annual Meeting (PED-25, 1987 ), pp. 245–258.
Willis, D., I.A. Donaldson, J.L. Murray, and M.H. Williams, “Knowledge-Based Systems for Process Planning Based on a Solid Modeller,” Computer-Aided Engineering Journal (Vol. 6, No. 1, Feb. 1989 ), pp. 21–26.
Alting, L., “XPLAN–An Expert Process Planning System and Its Further Development,” 27th International MASTADOR Conference, UMIST, UK, (April 20–21, 1988 ), pp. 291–297.
Glass, M., “OPEX–An Expert System for CAPP,” 6th International Workshop on Expert Systems and Their Applications, Avignon, France, April 28–30, 1986, pp. 141–147.
Chang T.C., Wysk R.A., and Wang H.P., Computer Aided Manufacturing, Prentice Hall, Englewood Cliffs, New Jersey, 1991.
Kalpakjian, S., Manufacturing Engineering and Technology, Addison-Wesley, Reading, MA, 1989.
Rembold, U., C. Blume and R. Dillmann, Computer-Integrated Manufacturing Technology and Systems, Marcel Dekker Inc., New York, 1985.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1992 Springer Science+Business Media New York
About this chapter
Cite this chapter
Chryssolouris, G. (1992). Process Planning. In: Manufacturing Systems. Springer Texts in Mechanical Engineering. Springer, New York, NY. https://doi.org/10.1007/978-1-4757-2213-0_4
Download citation
DOI: https://doi.org/10.1007/978-1-4757-2213-0_4
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4757-2215-4
Online ISBN: 978-1-4757-2213-0
eBook Packages: Springer Book Archive