Tire Traction on Dry, Uncontaminated Surfaces

  • L. Segel

Abstract

Tire traction on dry surfaces is discussed with emphasis given to the viewpoint of the vehicle-tire system engineer. The paper indicates that, in this context, the mechanics of shear force generation assumes greater importance than the detailed mechanisms that control the frictional coupling at the tire-road interface. After postulating a working definition to distinguish between the concept of “tire traction” and the mechanics of shear force generation, the latter process is described in phenomenological terms. Initial, early, and current efforts to define and measure the shear force mechanics of tires in their normative operating condition are briefly reviewed prior to presenting test results obtained recently in several research programs. These findings relate to (1) the manner in which the longitudinal and lateral components of shear force depend on the longitudinal and lateral components of slip, (2) the shear force/slip relationship as a function of tire geometry and construction, and (3) the sensitivity of peak lateral force to small amounts of tread shoulder wear.

Keywords

Road Surface Slip Angle Longitudinal Force Side Force Lateral Slip 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    H. Dugoff, et al., “An Analysis of Tire Traction Properties and Their Influence on Vehicle Dynamic Performance,” SAE Transactions, Vol 79, Paper No. 700377, New York, Society of Automotive Engineers, 1970.Google Scholar
  2. 2.
    P. S. Fancher, et al., “Tire Traction Grading Procedures as Derived from the Maneuvering Characteristics of a Tire-Vehicle System,” Vol II, Final Report, NBS Contract No. 1-35715, Highway Safety Research Institute, Univ. of Michigan, Ann Arbor, June 13, 1972.Google Scholar
  3. 3.
    D. I. Livingston and J. E. Brown, “Physics of the Slipping Wheel, II. Slip Under Both Tractive and Lateral Force,” Rubber Chemistry and Technology, Vol 43, No. 2, pp. 241–261, 1970.CrossRefGoogle Scholar
  4. 4.
    H. Sakai, “Theoretical Study of the Effect of Tractive and Braking Forces on Cornering Characteristics of Tires,” Bulletin of the Society of Automotive Engineers of Japan, No. 3, March 1971.Google Scholar
  5. 5.
    H. B. Pacejka and P. S. Fancher, “Hybrid Simulation of Shear Force Development of a Tire Experiencing Longitudinal and Lateral Slip,” Proceedings of the XIV International Automobile Technical Congress, FISITA, London, pp. 3/78–3/85, June 1972.Google Scholar
  6. 6.
    S. K. Clark, ed., “Mechanics of Pneumatic Tires,” NBS Monograph 122, November 1971: A United States Department of Commerce Publication: U.S. Government Printing Office, Washington, D.C.Google Scholar
  7. 7.
    N. Seitz, “Experimentelle Untersuchungen uber Seitenkrafte an rollenden Luftreifen.” Automobil-Industrie, pp. 71-77, April 1969.Google Scholar
  8. 8.
    D. L. Nordeen and A. D. Cortese, “Force and Moment Characteristics of Rolling Tires.” SAE Transactions, Vol. 72, pp. 325–336, 1964.Google Scholar
  9. 9.
    G. Krempel, “Untersuchungen an Kraftfahrzeugreifen.” Automobiltechnische Zeitschrift, Vol 69, Nos. 1 and 8, pp. 1–8, 262-268, 1967.Google Scholar
  10. 10.
    W. Gengenbach, “Das Verhalten von Kraftfahrzeugreifen auf trachener und insbesondere nasser Fahrbahn.” Dissertation submitted to the Universitat (TH) Karlsruhe, 1965.Google Scholar
  11. 11.
    K. E. Holmes and R. D. Stone, “Tire Forces as Functions of Cornering and Braking Slip on Wet Road Surfaces.” Proceedings, The Instiitution of Mechanical Engineers, Vol 183, Part 3H, pp. 35–55, 1968–69.Google Scholar
  12. 12.
    H. Dugoff and B. J. Brown, “Measurement of Tire Shear Forces,” SAE Transactions, Vol 70, Paper No. 700092, New York: Society of Automotive Engineers, 1970.Google Scholar
  13. 13.
    W. E. Meyer and M. O. Schrock, “Review of Test Methods for Tire Friction Characteristics.” Journal of Materials, Vol. 4, No. 1, pp. 44–61, March 1969.Google Scholar
  14. 14.
    C. G. Giles, et al., “A Test Vehicle for Studying the Skid Resisting Properties of Tires and Road Surfaces During Controlled Cornering and Braking,” Road Research Laboratory Report LR 99, 1967, Crowthorne, England.Google Scholar
  15. 15.
    G. Freudenstein, “Luftreifen bei Schrag und Kurvenlauf. Experimentelle und Theoretische Untersuchungen an Lkw — Reifen.” Deutsche Kraftfahrtforschung und Strassenverkehrstechnik, No. 152, 1961.Google Scholar
  16. 16.
    W. Bergman, et al., “Tire Traction Measurement on the Road and in the Laboratory,” SAE Transactions, Vol. 80, Paper No. 710630, New York: Society of Automotive Engineers, 1971.Google Scholar
  17. 17.
    A. H. Neill, Jr. and P. L. Boyd, “Research on Wet Tire Traction,” Tire Science and Technology, Vol 1, No. 2, pp. 172–189, May 1973.CrossRefGoogle Scholar
  18. 18.
    R. D. Ervin, et al., “Vehicle Handling Performance.” (Vol. 1 of 2), Final Report, DOT Contract HS-031-1-159, Highway Safety Research Institute, Univ. of Michigan, Ann Arbor, November 1972.Google Scholar

Copyright information

© Springer Science+Business Media New York 1974

Authors and Affiliations

  • L. Segel
    • 1
  1. 1.University of MichiganAnn ArborUSA

Personalised recommendations