Some Recent Investigations into Dynamics and Frictional Behavior of Pneumatic Tires
A concise review of dynamic tire response to both in-plane and out-of-plane wheel motions is followed by discussions on special subjects. First, the possible self-excited in-plane motion of a wheel of which the axle is suspended with respect to the steady-moving car body is discussed. The influence of several parameters such as the rate of change of effective rolling radius with tire deflection, suspension angle, and tire torsional and slip stiffness is indicated. Second, the influence of tire inertia upon out-of-plane tire performance is elucidated on the basis of theoretical results. The experimentally observed considerable reduction of the first natural frequency of the out-of-plane motion of the tire about a diameter, due to wheel rotational speed, is analyzed. The last portion deals with a theoretical explanation of the creation of a loop in the quasi steady-state cornering force characteristic which appeared to occur on wet slippery roads with tires exhibiting certain wear patterns.
KeywordsSlip Angle Frictional Behavior Side Force Tire Model Wear Edge
Unable to display preview. Download preview PDF.
- 1.H. B. Pacejka, “The Tire as a Vehicle Component, Yaw and Camber Analysis,” Chapter 7.5 of Mechanics of Pneumatic Tires, ed. S.K. Clark, pp. 757-839, NBS Monograph 122, Washington, D.C. 197L.Google Scholar
- 2.B. von Schlippe and R. Dietrich, “Das Flattern eines bepneuten Rades,” Bericht Lilienthal Cesellschaft 140, 1941. English translation: NACA TM 1365, p. 125, 1954.Google Scholar
- 5.H. C. A. van Eldik Thieme, “The Tire as a Vehicle Component, Cornering and Camber Experiments,” Chapter 7.3 of Mechanics of Pneumatic Tires, ed. S. K. Clark, pp. 631-693, NBS Monograph 122, Washington, D.C., 1971.Google Scholar
- 6.A. R. Savkoor, “The Lateral Flexibility of Pneumatic Tires and its Application to the Lateral Rolling Contact Problem,” SAE Paper No. 700378, FISITA/SAE Congress, 1970.Google Scholar