The Surface Topography Produced by Deep Drilling Operations

  • B. J. Griffiths


This paper defines the surface topography produced by deep drilling processes and shows that a novel surface form exists which consists of a regular series of plateaux separated by deep valleys. The spacing between the valleys corresponds to the feed rate and the valley depth is proportional to the feed rate. Plateau-honed surfaces have a similar topography and the usefulness of deep drilled surfaces with respect to bearing performance is demonstrated. The paper finishes by considering the use of surface integrity data sets to define the complete topography of a deep drilled surface.


Stress Corrosion Crack Compressive Residual Stress Surface Form Scanning Electron Microscope Photograph Cylinder Liner 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. [1]
    Field M, Kahles J F & Cammett J T (1972) A review of measuring methods for surface integrity. Annals of CIRP, 21/2, pp 219–238.Google Scholar
  2. [2]
    King T G & Stout K J (1977) Some topographic features of the wear process. Annals of CIRP, 25/1, pp 351–356.Google Scholar
  3. [3]
    Peters J, Vantierck P & Sastrodinoto M (1979) Assortment of surface topology analysis techniques. Annals of CIRP, 28/2, pp 539–554.Google Scholar
  4. [4]
    Stevens A J (1979) Deep hole boring practice at Dowty Rotol Ltd. Proceedings of 3rd International Conference on Deep Hole Drilling and Boring, Brunel University, May.Google Scholar
  5. [5]
    Stürenburg H O (1979) Deep hole drilling in automotive engine production. Proceedings of 3rd International Conference on Deep Hole Drilling and Boring, Brunel University, May.Google Scholar
  6. [6]
    Stout K (1980) How smooth is smooth? The Production Engineer, 59/5, pp 17–22.CrossRefGoogle Scholar
  7. [7]
    Machining Data Handbook (1980) Machinability Data Centre, Metcut Research Associates, 3980 Rosslyn Drive, Cincinnati, Ohio 45209, USA.Google Scholar
  8. [8]
    Murthy R L & Kotiveerachari B (1981) Burnishing metallic surfaces — a review. Precision Engineering, July, pp 172-179.Google Scholar
  9. [9]
    Santochi M & Vignate M (1982) A study on the functional properties of a honed surface. Annals of CIRP, 31/1, pp 431–434.CrossRefGoogle Scholar
  10. [10]
    Stout K J & Spedding T A (1982) The characterization of internal combustion engine bores. Wear, 83, pp 311–326.CrossRefGoogle Scholar
  11. [11]
    Griffiths B J & Grieve R J (1985) The role of burnishing pads in the mechanics of deep drilling process. International Journal of Production Research, 23, No. 5.Google Scholar

Copyright information

© Springer Science+Business Media New York 1986

Authors and Affiliations

  • B. J. Griffiths
    • 1
  1. 1.Production Technology DepartmentBrunel UniversityUxbridge, MiddlesexUK

Personalised recommendations