SNMP, Wins and DHCP

  • Bill Buchanan


SNMP (Simple Network Management Protocol) is a well-supported standard which can be used to monitor and control devices. It typically runs of hubs, switches and bridges. Many SNMP devices provides both general network management and device management through a serial cable, modem, or over the network from a remote computer. It involves a primary management station communicating with different management processes. Figure 37.1 shows an outline of an SNMP-based system. A SNMP agent runs SNMP management software. An SNMP server sends commands to the agent which responses back with the results. In this figure the server asks the agent for its routing information and the agent responds with its routing table. These responses can either be polled (the server sends a request for information) or interrupt-driven (where the agent sends its information at given events). A polled system tends to increase network traffic as the agent may not have any updated information (and the server must re-poll for the information).


Configuration Parameter Receive Message Variable Binding Network Address Simple Network Management Protocol 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Copyright information

© Springer Science+Business Media Dordrecht 1999

Authors and Affiliations

  • Bill Buchanan
    • 1
  1. 1.Napier UniversityScotland

Personalised recommendations