Abstract
The continuing worldwide demand for energy and raw materials creates a strong need for specialized bulk material ports able to accommodate a large deep draft vessel.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
American Petroleum Institute, 1984. “Planning, Designing and Constructing Fixed Offshore Platforms.” API RP 2A.
Andresen, A., Berre, T., Kleven, A. and Lunue, T., 1979. “Procedures Used to Obtain Soil Parameters for Foundation Engineering in the North Sea, Marine Geotechnique, Vol 3,’ No 3.
Bishop, A. W. and Henkel, D. J.,’ 1962. Measurement of Soil Properties in the Triaxial Test,2nd ed. Edward Arnold Ltd., London.
Bogard, J. D. and Matlock, H., 1977. “A Computer Program for the Analysis of Beam-Columns ’ Under Static Axial and Lateral Loads.” Proceedings 9th Annual Offshore Technology Conference, Paper No 2953, Vol. 3 Houston, TX.
Bratteland, E., 1974. “A Survey on Acceptable Ship Movements in Harbours.” The Dock and Harbour Authority, Vol LV, No 647.
Brunn,;P. 1989. Port Engineering, 4th ed. Gulf Publishing Co., Houston, TX.
BSI, 1975. Method of Test for Soils for Civil Engineering Purpose, Standard BSI377. British Standard Institution, London.
Carrier, W. D. and Christian, J. T., 1973. “Rigid Circular Plate Resting on a Non-Homogenous Elastic Half-Space.” Geotechnique, Vol. 23, No 1.
Chaney, R. A., 1991. “Sampling and Preparation of Marine Sediments.” Foundation Engineering Handbook, 2nd ed., Fang, H-Y (ed.). Van Nostrand Reinhold, New York.
Chaney, R. C. and Demars, K. R., 1991. “Offshore Structure Foundations.” Foundation Engineering Handbook, 2nd ed., Fang, H-Y (ed.) Van Nostrand Reinhold, New York.
Chesson, E., 1980. “Offshore Artificial Islands Energy Ports of the Future?” Proceedings ASCE Specialty Conference PORTS ‘80, Norfolk, VA.
Dawson, T. H., 1983. Offshore Structural Engineering. Prentice-Hall, Englewood Cliffs, NJ.
EAU, 1990, Recommendations of the Committee for Waterfront Structures. Ernst and John, Berlin.
Emery, K. O., 1969. “The Continental Shelves with Biographical Sketch.” Scientific American, Vol. 221, No 42.
Ferguson, N. J., 1981. “Planning, Layout and Design of Bulk Terminals for Large Ships.” Proceedings 25th PIANC Congress, Vol. 3, S II, Edinburgh.
Focht, J. A., Jr. and Koch, K. J., 1973. “Rational Analysis of the Lateral Performance of Offshore Pile Groups.” Proceedings 5th Annual Offshore Technology Conference, Vol. 2, Paper No. 1896, Houston, TX.
Foss, I., Dalhberg, R.,’ and Kvalstad, T., 1978. “Foundation Design of Gravity Structures with Respect to Failure in Cyclic Loading. Proceedings 10th Annual Offshore Technology Conference, Vol 1, Paper No 3114, Houston, TX.
Gaythwaite, J. W., 1990. Design of Marine Facilities. Van Nostrand Reinhold, New York.
Geise, J. M. and KoLK,’ H. J., 1983. “The Use of Submersibles for Geotechnical Investigations.” Proceedings of International Conference Jubtech ‘83, London.
Gerwick, B. C., 1986; Construction of Offshore Structures. John Wiley and Sons, New York.
Hansen, J. B., 1970. ’ A Revised and Extended Formula for Bearing Capacity, Geoteknisk Institute Bulletin No 28. Danish Geotechnical Institute. Copenhagen.
Headland, J. R., 1995. “Offshore Moorings.” Marine Structures Engineering Specialized Applications, Tsinker, G. P. (ed.) Chapman and Hall, New York.
Husain, S. I., 1983. “Design and Full Scale Testing of Elastomeric Bridge Bearings for Trestle and Jetty Trestle of Super Tanker Offshore Terminal.” ASCE, Proceedings Specialty Conference PORTS ‘83, New Orleans, LA.
Lambe, J. W.,1951. Soil Testing for Engineers. John Wiley and Sons, New York.
LeMahaute, B. L., 1977. “Wave Agitation Criteria for Harbors.” Proceedings ASCE Specialty Conference PORTS ‘77, Long Beach, CA.
Lowe,: J., III and Zaccheo, P. F., 1991. “Subsurface Explorations and Sampling.” Foundation Engineering Handbook,2nd ed., Fang, H -Y (ed.). Van Nostrand Reinhold, New York.
Marlowe, L. H., 1995. “Computer Analysis of Terminal/Ship Mooring.” ASCE Proceedings Specialty Conference, PORTS ‘85, Tampa, FL.
Matlock, H. and Reese, L. C., 1960. “Generalized Solutions for Laterally Loaded Piles.” ASCE Journal of the Soil Mechanics and Foundation Division, Vol. 86, No. SM5.
Mcclelland, B., 1972. Techniques Used in Soil Sampling at Sea. Offshore, Vol. 32, No 3.
Naval Facilities Engineering Command, 1986. “Fixed Moorings,” Design Manual 26. 4, Alexandria, VA.
Noorany, I. and Seed, H. B., 1965. “In situ Strength Characteristics of Soft Clay.” ASCE Journal Soil Mechanics and Foundation Division, Vol. 91.
Ocimf, 1978. Guidelines and Recommendations for Safe Mooring of Large Ships at Piers and Sea Islands. Witherby and Sons, London.
Ociivif, 1992. Mooring Equipment Guidelines: Oil Companies International Marine Forum.
Pianc, 1984. “Report of the International Commission for Improving the Design of Fender Systems,” Supplement to Bulletin No 45.
Pianc, 1995. “Criteria for Movements of Moored Ships in Harbours, Supplement to Bulletin No 88.
Poulos, H. G. and Davis; E. H., 1974. Elastic Solutions for Soil and Rock Mechanics. John Wiley and Sons, New York.
Quinn,A. DeF:; 1972. Design and Construction of Ports and Marine Structures,2nd ed. McGraw-Hill Book Co., New York.
Reese, L. C. and Sullivan, W. R., 1977. Documentation of Computer Program COM624Ports I and I I Analysis of Stresses and Deflections for Laterally Loaded Piles, Including Generation of P-Y Curves. University of Texas, Austin.
Skempton, A. W. and Sowa, V. A., 1963. “The Behavior of Saturated Clays During Sampling and Testing.” Geotechnique, Vol. 13, No 4.
Slinn, P. J. B., 1979. “Effect of Ship Movement on Container Handling Rates.” The Dock and Harbour Authority, August.
Soros, P. Koman, B. and Lubetkkin, B. M., 1986. “Innovative Bulk Ports in Latin America.” The Dock and Harbour Authority Vol. LXVII, No 785.
Sugnv, L., 1983. “Conventional versus Offshore Loading and Unloading_” Indonesian Coal/ Lignite Deli-. and U.S. Technical Symposium, Jakarta, Indonesia.
Sullivan, R. A., Wright, S. J.,and Sanner, D. W. F., 1980. “Evaluation of Design Parameters from Laboratory Tests.” Offshore Site In vestigation: Proceedings of a Conference held March, 1979,Graham and Trotman, London.
TERMPOL Code, 2nd ed., 1983. Canadian Coast Guard, Ottawa.
Thorensen, C. A:, 1988. Port Design. Tapir Pub-Ushers, Trondheim, Norway.
Tsinker, G. P., 1995. Marine Structures Engineering: Specialized Applications. Chapman and Hall; New York.
Vrijling, J. K. and Oosting, J., 1985: “Probabilistic Design of Flexible Dolphins ” The Dock and Harbour Authority, September.
Winterkorn, H. F. and Fang, H-Y, 1991. “Soil Technology and Engineering Properties of Soils.” Foundation Engineering Handbook, 2nd ed. Fang, H-F _(ed.). Van Nostrand Reinhold, New York.
Wright,J.,Child, T. J Rebel, J. M., and Roberton, J., 1987. “Port Bonython Jetty, South Australia.” Proceedings Institute Civil Engineering, Part 1.
Yaron, S. L and Shimoni J 1982. “The’Hadera Offshore Coal Unloading Terminal: A New Approach to Unloading of Bulk in the Open Sea.” Proceedings of Offshore Technology Conference, Houston, TX.
Youndale, J. E. and Shrivastava, S. M., 1986. “Design and Construction of Marine Facilities for Ridley Island Coal Terminal.” Proceedings Offshore Deep Water Terminals Asce Specialty Conference PORTS ‘86, Oakland, CA.
Young, A. G., 1991. “Marine Foundation Studies.” Handbook of Coastal and Ocean Engineering, Vol. 2, Herbich, J. B. (ed.). Gulf Publishing House, Houston, TX.’
Young, A. G., Kraft, L. M., Jr., and Focht, J. A. Jr., 1975. “Geotechnical Considerations in Foundation Design of Offshore Gravity Struc-tures.” Proceedings 7th Annual Offshore Technology Conference, Vol. 3, Paper No 2371, Houston, TX.
Zonailo, G. W., 1992. “Bulk Commodity Terminals—Planning for the Future; Competitive and Environmental Challenges.” ASCE Proceedings Specialty Conference PORTS ’92, Seattle, WA.
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Tsinker, G.P. (1997). Offshore Deep Water Terminals. In: Handbook of Port and Harbor Engineering. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-0863-9_8
Download citation
DOI: https://doi.org/10.1007/978-1-4757-0863-9_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-0865-3
Online ISBN: 978-1-4757-0863-9
eBook Packages: Springer Book Archive