Notch Sensitivity of Aluminum-Zinc-Magnesium Alloys at Cryogenic Temperatures
- 279 Downloads
At present, the 2000(Cu), 5000(Mg), 6000(Mg-Si) series provide most of the aluminum alloys used in cryogenic applications. Established alloys in the 7000(Zn) series, including 7075, 7079, and 7178, are more sensitive to notches than many of the alloys of the above types [1,2] and have not been seriously considered. Recently, several new 7000-series alloys have been introduced with appreciably greater notch toughness than other alloys of this type. It is. expected that these new alloys may be of considerable use in cryogenic applications.
KeywordsAluminum Alloy Cryogenic Temperature Smooth Specimen Tensile Yield Strength Notch Sensitivity
Unable to display preview. Download preview PDF.
- 1.M. P. Hanson, G. W. Stickley, and H. T. Richards, “Sharp-Notch Behavior of Some High-Strength Sheet Aluminum Alloys and Welded Joints at 75°, -320°, and -423°F,” Am. Soc. Testing Material, Spec. Tech. Pub. No. 287 (1960).Google Scholar
- 2.J. L. Christian and J. F. Watson, in Advances in Cryogenic Engineering, Vol. 6, Plenum Press, New York (1961), p. 604.Google Scholar
- 3.J. G. Kaufman and E. W. Johnson, in Advances in Cryogenic Engineering, Vol. 6, Plenum Press, New York (1961), p. 637.Google Scholar
- 4.J. G. Kaufman, F. G. Nelson, and E. W. Johnson, in Advances in Cryogenic Engineering, Vol. 8, Plenum Press, New York (1963), p. 661.Google Scholar
- 5.“First Report of Special ASTM Committee on Fracture Testing of High-Strength Metallic Materials,” ASTM Bull. (Jan., Feb. 1960).Google Scholar
- 6.H. Neuber, Theory of Notch Stresses, McGraw-Hill, New York (1946).Google Scholar
- 7.J. G. Kaufman and E. W. Johnson, “The Use of Notch-Yield Ratio to Evaluate the Notch Sensitivity of Aluminum Alloys,” Am. Soc. Testing Materials Proc., 62 (1962).Google Scholar