Abstract
The bubble chamber has established Itself in high-energy physics research as one of the most useful tools. Since 1952, after the first bubble chamber was Introduced by Glaser[1], hundreds of important experiments have been carried on successfully. With the increase of the energy of modem accelerators the need for better and larger bubble chambers has grown. Recent proposals to match the size and magnetic field to the particle energy [2] show an increase in the bubble chamber size up to 3.93 m (14 ft). However, the magnetic field chosen was 20 kG, partly to save DC power, which for the above proposal is about 11 MW.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Work supported by U.S. Atomic Energy Commission.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
D. A. Glaser, Phys. Rev. 87:665 (1952).
M. Derrick, T. H. Fields, J. G. Fetkovich, K. B. Martin, E. G. Pewitt, and A. Tamosaitis, “Proposal for the Construction of a 12-Foot Hydrogen Bubble Chamber,” Argonne National Laboratory (June 10, 1964).
R. P. Shutt, NucL Instr. Methods 20:71 (1963).
C. Laverick and G. Lobell, Rev. Sci. Instr. 36 (6): 825 (1965).
W. H. Bergmann, J. Gruber, G. Hahn, G. Harigel, P. Meyer, K. Moustafa, and H. Rohm, NucL Instr. Methods 20(1):116 (1963).
D. C. Colley, J. B. Kinson, and L. Riddiford, NucL Instr. Methods 4:26 (1959).
K. N. Mukhin, R. S. Shlyapnikov, and L. M. Barkov, International Conference on High-Energy Accelerators and Instrumentation, CERN (1959), p. 514.
J. M. Toth, Jr., in: Advances in Cryogenic Engineering, Vol. 9, Plenum Press, New York (1964), p. 537.
J. M. Toth, Jr. and J. R. Barber, in: Advances in Cryogenic Engineering, Vol. 10, Plenum Press, New York (1965), p. 134.
D. W. Chamberlain, in: Advances in Cryogenic Engineering, Vol. 10, Plenum Press, New York (1965), p. 117.
S. Timoshenko and S. Woinowksy-Krieger, Theory of Plates and Shells, McGraw-Hill Book Company, New York (1959).
V. V. Novozhilov, The Theory of Thin Shells, Nordhoff (1959).
H. Brechna, “Effect of Nuclear Radiation on Magnet Insulation in High Energy Accelerators,” SLAC Report No. 40, Stanford Linear Accelerator Center, Stanford University, Stanford, California (1965).
H. Brechna, “Mechanical and Thermal Properties of Thick Wall Filament Wound Chambers,” SLAC Internal Report, Stanford Linear Accelerator Center, Stanford University, Stanford, California (1964).
J. Hertz and J. F. Haskins, in: Advances in Cryogenic Engineering, Vol. 10, Plenum Press, New York (1965), p. 163.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1966 Springer Science+Business Media New York
About this paper
Cite this paper
Brechna, H., Haldemann, W. (1966). Physical Properties of Filament Wound Glass Epoxy Structures as Applied to Possible Use in Liquid Hydrogen Bubble Chambers. In: Timmerhaus, K.D. (eds) Advances in Cryogenic Engineering. Advances in Cryogenic Engineering, vol 11. Springer, Boston, MA. https://doi.org/10.1007/978-1-4757-0522-5_34
Download citation
DOI: https://doi.org/10.1007/978-1-4757-0522-5_34
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-0524-9
Online ISBN: 978-1-4757-0522-5
eBook Packages: Springer Book Archive