Abstract
Contamination control in most cleanrooms is mainly directed to maintaining cleanliness of the cleanroom air, the processing materials used, and the products produced in that cleanroom. It is assumed that if the environment where the cleanroom product is manufactured is kept clean, then the product will not become contaminated. Unfortunately, keeping the manufacturing environment clean is only part of the task of avoiding product contamination. Any tool, process material, analytical device, and particularly the personnel used in the manufacturing process can contaminate the manufacturing process even if the entire operation is carried out in clean air. Handling materials or process components can contaminate them. Both chemical film and particle contaminants can be deposited on product surfaces with subsequent product quality degradation. For this reason, definition of the contamination deposited upon products during manufacturing is a necessary step in maintaining product quality.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Adams, T. E., 1985. Acoustic Microscopy Improves Internal Reliability of IC Packaging. Semiconductor International 8(2): 100–104.
Batchelder, J. S., 1988. Applications of Particulate Inspection of Wafers in Semiconductor Manufacturing. Proceedings of the 34th Institute of Environmental Sciences Annual Technical Meeting, pp. 359–362, April 1988, King of Prussia, PA.
Beeson, R. D., & Weintz, W. W., 1988. Cleanroom Facility Analysis of Fallout Particles for Quality Control Applications. Proceedings of the 9th International Committee of Contamination Control Societies Conference, pp. 628–631, September 26, 1988, Los Angeles.
Berger, J., & Tullis, B. J., 1987. Calibration of Surface-Particle Detectors. Micro-contamination 5(7):24–29.
Billat, S. P., 1988. Holographic Wafer Inspection. Proceedings of the 34th Institute of Environmental Science Annual Technical Meeting, pp. 363–367, April 1988, King of Prussia, PA.
Eesbeek, M. V., et al., 1988. The Effects of Particle-Size and Particle-Colour on Integrating Surface-Particle Counters. Proceedings of the 9th International Committee of Contamination Control Societies Conference, pp. 622–627, September 26, 1988, Los Angeles.
Gise, P., 1983. Principles of Laser Scanning for Defect and Contamination Detection in Microfabrication. Solid State Technology 26(11): 163–165.
Hamburg, O., & Shon, E. M., 1984. Particle Size Distribution on Surfaces in Clean Rooms. Proceedings of the 30th Institute of Environmental Sciences Annual Technical Meeting, April 1984, Orlando, FL.
Knollenberg, R. G., 1986. The Importance of Media Refractive Index in Evaluating Liquid and Surface Microcontamination Measurements. Proceedings of the 32d Institute of Environmental Sciences Annual Technical Meeting, April 1986, Atlanta.
Knollenberg, R. G., 1988. A Polarization Diversity Two-Color Surface Analysis System. Proceedings of the 34th Institute of Environmental Sciences Annual Technical Meeting, April 1988, King of Prussia, PA.
Lilienfeld, P., 1986. Optical Detection of Particle Contamination on Surfaces: A Review. Aerosol Science and Technology 5(2): 145–165.
Lindahl, B., 1970. A New Method for Determination of Surface Contamination Caused by Particle Fall-Out. Proceedings of the European Symposium on Contamination Control, June 1970, Paris, France.
U.S. Department of Defense, 1982. Product Cleanliness Levels and Contamination Control Program, MIL-STD-1246B. Philadelphia: Naval Publications and Forms Center.
Vo-Dinh, T., 1983. Surface Detection of Contamination: Principles, Applications and Recent Developments. Journal of Environmental Science 26(l):40–43.
Rights and permissions
Copyright information
© 1992 Van Nostrand Reinhold
About this chapter
Cite this chapter
Lieberman, A. (1992). Optical Measurement of Deposited Particles. In: Contamination Control and Cleanrooms. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-6512-9_24
Download citation
DOI: https://doi.org/10.1007/978-1-4684-6512-9_24
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-6514-3
Online ISBN: 978-1-4684-6512-9
eBook Packages: Springer Book Archive