Abstract
For the metalworking industry to remain profitable, it must continually reduce its cost of manufacturing parts. One important segment of this economic procedure has been the costs involved in removing unwanted material from the workpiece. For example, the airplane part shown in Fig. 6.1 originally weighed 6000 lb (2725 kg) and is machined down to 435 lb (197 kg) after many hours on large, expensive machine tools.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Salomon, C., “Process for the Machining of Metals or Similar Acting Materials When Being Worked by Cutting Tools,” German patent No. 523594, April 1931.
High-Speed Machining,“ Special Report No. 710, American Machinist, March 1979.
Merchant, M. E., “10 Years Ahead… What’s in It for Metalworking?” Society of Automotive Engineers, National Aeronautic Meeting, 1959.
King, R. I. and J. G. McDonald, (Lockheed), “Production Design Implications of New High-Speed Milling Techniques,” Journal of Engineering for Industry, ASME, November 1976, p. 1170.
Von Turkovich, B. F., “Influence of Very High Cutting Speed on Chip Formation Mechanics,” 7th North American Metalworking Research Conference Proceedings, 1979, SME Transactions.
Aggarwal, T. R., “Research in Practical Aspects of High-Speed Milling of Aluminum,” SME Paper No. MR82–262, Society of Manufacturing Engineers, Detroit, 1982.
McGee, J., et al., “Manufacturing Methods for High Speed Machining of Aluminum,” Final Technical Report, Vought Corporation Contract No. DAAK-40–76-C1329, submitted to U.S. Army Missile Research and Development Command, February 1, 1978.
Stelson, T. S., “Turning Tests on Aluminum and Titanium,” AMRP Report # SRD-81–062, TRW Inc. Contract No. F33615–79-C-5119, submitted to the Air Force Systems Command, 17 August 1981.
Schroeder, T. A. and S. Hague, “Conventional to High Speed Turning,” G. E. Carboloy Systems Department AMRP Report # SRD-81–062, submitted to the Air Force Systems Command, 17 August 1981.
Truncale, J. F. and T. C. Winiecki, “High Speed Machining, Expanded Production Machinability Data for Aerospace Alloys,” AMRP Report # SRD-81–086, General Dynamics Convair Div. Contract F33615–80-C-5057, submitted to the Air Force Systems Command, October 20, 1981.
Kegg, R. L. and W. J. Zdeblick, “High Speed Milling—Research vs. Todaÿ s Practices,” Proceedings of 20th Annual Meeting and Technical Conference, Numerical Control Society, Glenview, Ill., 1983.
Shigley, J. E., Mechanical Engineering Design, McGraw-Hill, New York, pp. 157–191.
Tlusty, J. and P. MacNeil, “Dynamics of Cutting Forces in End Milling,” Annals of CIRP, Vol. 24/1/1975. pp. 21–25.
Criger, G. L. (General Dynamics Convair Div.), “High Speed Machining in Production,” SAMPE Quarterly, April 1981, pp. 12–18.
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 1985 Chapman and Hall
About this chapter
Cite this chapter
Aggarwal, T.R. (1985). General Theory and Its Application in the High-Speed Milling of Aluminum. In: King, R.I. (eds) Handbook of High-Speed Machining Technology. Chapman and Hall Advanced Industrial Technology Series. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-6421-4_6
Download citation
DOI: https://doi.org/10.1007/978-1-4684-6421-4_6
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-6423-8
Online ISBN: 978-1-4684-6421-4
eBook Packages: Springer Book Archive