Abstract
Flexural strength of four different grades of dense silicon carbide was measured at different temperatures. It could be demonstrated by scanning electron microscopy that strength remains constand up to high temperatures, if the fracture mechanism turns out to be transgranular. In the case of intergranular fracture the decrease of strength with temperature is governed by subcritical crack growth.
Static fracture toughness vs. temperature characteristics have also been determined. The static fracture toughness data at high temperatures are assumed to be dependent upon subcritical crack growth in the case of intergranular fracture mechanism.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
F. F. Lange, and J.L. Iskoe, High-Temperature Strength Behavior of Hot-Pressed Si3N4 and SiC: Effect of Impurities, in “Ceramics for High Performance Applications”, J.J. Burke, A.E. Gorum, and R.N. Katz. eds., Brook Hill Publishing Company, Chestnut Hill (1974)
F.F. Lange, High-Temperature Strength Behavior of Hot-Pressed Si3N4: Evidence for Subcritical Crack Growth, J. Amer. Ceram., Soc. 57: 84 (1974)
A.G. Evans, and F.F. Lange, Crack Propagation and Fracture in Silicon Carbide, J. Mat. Sci. 10: 1659 (1975)
A.G. Evans, High-Temperature Slow Crack Growth in Ceramic Materials, in the same source as ref. 1
J. Kriegesmann, Biegefestigkeitsuntersuchungen an heißgepreßtem Siliciumcarbid, Ber. Dt. Keram. Ges., 55: 391 (1978)
J. Kriegesmann, K. Reinmuth, and A. Lipp, Die Herstellung und Eigenschaften von heißgepreßtem und heißisostatisch gepreßtem SiC, in “Keramische Komponenten für Fahrzeug-Gasturbinen” W. Bunk, and M. Böhmer eds.,Springer Verlag, Berlin, Heidelberg, New York (1978)
L.A. Simpson, Use of the Notched-Beam Test for Evaluation of Fracture Energies, J. Amer. Ceram. Soc. 57: 151 (1974)
R. Pabst, G. Popp, and L. Li, private communication
M.G. Mendiratta, J. Wimmer, and I. Bransky, Dynamic KIC and Dynamic Flexural Strength in HS-130 Si3N4., J.Mat. Sci. 12: 212 (1977)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1983 Plenum Press, New York
About this chapter
Cite this chapter
Kriegesmann, J., Lipp, A., Reinmuth, K., Schwetz, K.A. (1983). Strength and Fracture Toughness of Silicon Carbide. In: Lenoe, E.M., Katz, R.N., Burke, J.J. (eds) Ceramics for High-Performance Applications III. Army Materials Technology Conference Series, vol 1. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-3965-6_36
Download citation
DOI: https://doi.org/10.1007/978-1-4684-3965-6_36
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-3967-0
Online ISBN: 978-1-4684-3965-6
eBook Packages: Springer Book Archive