Abstract
In recent years considerable effort has been expended on the development of vanadium base alloys for fuel element cladding in sodium-cooled fast breeder reactors. This paper deals with the effects of exposure to sodium on several of the more promising vanadium alloys. The compositions that were studied are:
V-9Cr-3Fe-1.3Zr-0.05C (VANSTAR 7)
V-8Cr-10Ta-1.3Zr-0.05C (VANSTAR 8)
V-6Fe-5Nb-1.3Zr-0.05C (VANSTAR 9)
V-20Ti (for comparison)
All alloys exhibited weight gains after exposure to flowing sodium containing less than lOppm oxygen in a Type 316 stainless steel loop system over the temperature range of 675–800°C. Removal of the interstitials, nitrogen, carbon, and oxygen from the stainless steel, and their absorption by the vanadium alloys is shown to account for the observed increase in weight after exposure. The kinetics of the corrosion process, the weight change data, and the mechanical property changes related to interstitial pick up from the stainless steel have been examined, using a layer chemical analysis technique. Interstitial concentration gradients in both the vanadium alloys and the stainless steel loop tubing have been used to obtain activation energies for corrosion and interstitial diffusion coefficients in these materials. In addition to weight change and metallographic results, data are presented on the effects of this interstitial absorption on the mechanical properties of the vanadium alloys. After 1500 and 2650 hours of exposure to sodium, 800°C tensile elongation values greater than 20 percent were obtained for the VANSTAR alloys, but the room temperature ductility was very much reduced. This paper discusses ways of reducing the interstitial absorption and mechanical property deterioration. Among these are the use of stabilized stainless steel loop construction at more realistic reactor operating temperatures, or modification of stainless to vanadium alloy surface area ratios.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. E. Irvin, A. L. Bement, and R. G. Hoagland, “The Combined Effects of Temperature and Irradiation on the Mechanical Properties of Austenitic Stainless Steels,” Flow and Fracture of Metals and Alloys in Nuclear Environments, ASTM STP-380, pp 236–250, ASTM, (1965)
H. Böhm, W. Dienst, H. Hauck, and H. J. Laue, “Irradiation Effects on the Mechanical Properties of Vanadium-Base Alloys,” Paper No$1175, ASTM STP No. 426, June 27-July 1, (1966).
R. T. Begley, E. C. Bishop, R. W. Buckman, R. A. Nadler, and G. A. Whitlow, “Development of Vanadium Alloys for LMFBR Cladding,” Trans. Am. Nucl. Soc., 11, 2, p. 501, (1968).
H. U. Borgstedt and G. Frees, “The Oxidation of Vanadium Base Alloys by Liquid Sodium Containing Dissolved Oxides in Temperatures Ranging from 500 to 600°C,” Corrosion, 24, 7, 209, (July 1968).
H. U. Borgstedt and G. Frees,“ The Oxidation of Metals and Alloys for Cladding of Fast Reactor Fuel Elements by Oxygen Containing Liquid Sodium,” Paper presented at The 4th International Congress on Metallic Corrosion, Amsterdam, ( September 1969 ).
L. Champeix, R. Darras, and J. Sannier, “Corrosion of Vanadium Alloys in Sodium,” Proc, IAEA Symp. on Alkali Metal Coolants, Vienna, SM 85 /7 pp. 45–61, (1966).
Annual Progress Report for 1965 Metallurgy Division,“ ANL-715, Argonne National Laboratory, (1965).
Annual Progress Report for 1966 Metallurgy Division,“ ANL-7299, Argonne National Laboratory, (1966).
S. Greenberg, W. E. Ruther, and H. A. Levin, “Corrosion of Vanadium Base Alloys in Sodium at 500 to 750°C,” Proc. IAEA Symp. on Alkali Metal Coolants, Vienna, SM 85 /20, pp. 63–84, (1966).
W. E. Ruther, “The Corrosion of Vanadium-base Alloys in Sodium,” Proc. Int. Conf. on Sodium Technology and Large Fast Reactor Design, ANL-7520 Part I pp. 182–191, (1968).
J. R. Weeks, “Quarterly Progress Report of Work Sponsored by the Fuels and Materials Branch,” BNL 50123 (T-501), Brookhaven National Laboratory, (1968).
Los Alamos Scientific Laboratory, “Quarterly Status Report on the Advanced Plutonium Fuels Program,” LA-3745-MS, (1967).
K. C. Thomas, E. C. Bishop, and G. A. Whitlow, “The Corrosion and Compatibility of Vanadium Alloys for Fuel Element Cladding,” Nuclear Applications and Technology, vol. 7, No. 2, pp 144–154, (1969).
G. A. Whitlow, R. J. Hornak, S. L. Schrock, and E. C. Bishop, “The Effects of Exposure to Sodium on the Metallurgical and Mechanical Properties of Vanadium Alloys,” J. Less Common Metals, 18, pp. 357–371, (1969).
W. Pollack, K. C. Thomas, K. R. Jordan, R. T. Begley, R. W. Buckman, and E. C. Bishop, Westinghouse Electric Corporation Rept. WCAP-3487–16, (1967).
D. L. Smith, Reactor Development Program Progress Report ANL7577, p. 153–155, (April-May 1969 ).
E. C. Bishop, R. A. Nadler, and G. A. Whitlow, “Vanadium Alloy Cladding Development Quarterly Progress Report for the Period Ending December 31, 1968,” Westinghouse Electric Corporation, WARD 3791–30, (1969).
Allison Division, General Motors Final Report, “Investigation of Bimetallic Liquid Metal Systems,” GMAD 3643–8, (1966).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1970 Springer Science+Business Media New York
About this chapter
Cite this chapter
Whitlow, G.A., Hornak, R.J., Schrock, S.L., Bishop, E.C. (1970). The Effects of Exposure to Flowing Sodium on Vanadium Alloys in Stainless Steel Containment Systems. In: Draley, J.E., Weeks, J.R. (eds) Corrosion by Liquid Metals. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-1845-3_8
Download citation
DOI: https://doi.org/10.1007/978-1-4684-1845-3_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-1847-7
Online ISBN: 978-1-4684-1845-3
eBook Packages: Springer Book Archive