Abstract
The scope of this review is confined to (i) upflow of particulate solids in a tube as occurs in vertical pneumatic conveying and riser-reactors; and (ii) downflow of particulate solids in a vertical standpipe. The aims are to present a personal view on the status of knowledge of the subjects in a structured framework and to indicate areas where further work is warranted. No attempt has been made to report all works published on the subjects and to present the conflicting conclusions reached by all the workers.
The scope of the present review does not extend to horizontal gas-solid flow — a much less well understood subject. A recent review by Knowlton (1979) covers all aspects of gas-solid flow including horizontal conveying. Nor does the present paper touch on elutriation of fine particles from a fluidized bed. A comprehensive review of this subject was recently reported by Matsen (1979). This is an area with active research in progress as indicated by the papers presented at the 1979 Annual AIChE meeting in San Francisco and here at Henniker.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Arastoopour, H. and Gidaspow, D., 1979, Ind. Eng. Chem. Fundamentals, 18, 123.
Arastoopour, H. and Gidaspow, D., 1979, Powder Technology, 22, 77. Bachovchin, D.M., Mulik, P.R., Newby, R.A. and Keairns, D.L., 1979
Solids transport between adjacent CAFB fluidized beds, Report No. EPA–600/7–79–021, United States Environmental Protection Agency.
Bandrowski, J., Kaczmarzyk, M., Nowark, M. and Sciazko, M., 1977, Inz. Chem. 7, 243, 499.
Bandrowski, J., Kaczmarzyk, G., Malczyk, R. and Raczck, J., 1978, Inz. Chem., 8, 779.
Barth, W., 1954, Chem.Ing.Tech., 20, 29.
Barth, W., 1958, Chem.Ing.Tech., 30, 171.
Baverloo, W.A., Leniger, H.A. and van der Velde, 1961, Chem. Eng. Sci. 15, 260.
Bourgeois, P. and Grenier, P., 1968, Can. J. Chem. Engng., 46, 325. Brown, R.L. and Richards, J.C., 1960, Trans. Inst. Chem. Engrs., 38, 244.
Brown, R.L. and Richards, J.C., 1965, Rheologica Acta, 4, 153. Bulsara, P.U., Zenz, F.A. and Eckert, R.A., 1964, Ind. Eng. Chem. Process Design and Development, 3, 348.
Burkett, R.J., Chalmers-Dixon, P., Morris, P.J. and Pyle, D.L., 1971, Chem. Eng. Sci. 26, 405.
Capes, C.E., 1971, Can. J. Chem. Eng., 49, 182.
Capes, C.E. and Nakamura, K., 1973, Can. J. Chem. Engng., 51, 31. Chen, T.Y., Walawender, W.P. and Fan, L.T., 1979, Powder Technology, 22, 89.
Capes, C.E., 1971, Can. J. Chem. Eng., 49, 182.
Capes, C.E. and Nakamura, K., 1973, Can. J. Chem. Engng., 51, 31. Davidson, J.F. and Nedderman, R.M., 1973, Trans. Inst. Chem. Engrs., 51, 29.
Deich, M.E. et al., 1974, High Temperature 12(2), 299; (translation of Teplofiz Vys. Temp. 12 (2) 344, 1974)
Jong, J.A.H., 1975, Powder Technology, 12, 197.
Jong, J.A.H. and Hoelen, Q.E.J.M., 1975, Powder Technology 12, 201.
Dixon, G., 1975, Int. J. Multiphase Flow, 2, 465.
Dixon, G., 1979, “The impact of powder properties on dense phase flow” paper presented at Int. Conf. on Pneumatic Conveying, Powder Advisory Centre, London.
Do, D.D., 1976, B.E. Thesis, University of Queensland.
Do, D.D., Jones, P.J., Leung, L.S. and Matsen, J.M., 1977, Proc.
Particle Technology Nuremberg, Ed. Brauer, H. and Molerus, 0. D23.
Dries, H.W.A., 1980, Proceedings Third Engineering Foundation Conference on Fluidization, Henniker.
Eleftheriades, C.M. and Judd, M.R., 1978, Powder Technology 21, 217. Engh, T.A., 1969, J. of Eng. for Industry Trans. ASME, 335.
Ergun, S., 1952, Chem. Eng. Progr., 48, (2) 89.
Geldart, D., 1973, Powder Technology, 7, 285.
Gidaspow, D. and Solbrig, C.W., 1976, “Transient two-phase flow models in energy production”, AIChE 81st National Meeting April, 11.
Ginestra, J.C., Rangachari, S. and Jackson, R., 1980, Proceedings Third Engineering Foundation Conference on Fluidization, Henniker.
Grace, J.R. and Tuot, J., 1979, Trans. Inst. Chem. Engrs., 517, T49. Grossman, G., 1975, AIChEJ, 21, 720
Harin, Q.H. and Molstad, M.C., 1949, Ind. Eng. Chem., 41, 1148. Harrison, D., Davidson, J.F. and de Koch, J.W., 1961, Trans. Inst. Chem. Engrs., 39, 202.
Hinkle, B.L., 1953, Ph.D. thesis, Georgia Institute of Technology. Hinze, J.0., 1962, Appl. Sci. Res., Section A. 11, 33.
Holland, J., Miles, J.E.P., Schofield, C. and Shook, C.A., 1969, Trans. Inst. Chem. Engrs., 47, T154.
Ishida, M. and Shirai, T., 1975, J. Chem. Eng. Japan, 8, 477. Jackson, R., 1963, Trans. Inst. Chem. Engrs., 41, 1.
Jansen, H.A., 1895, Zeitschrift, 1045.
Jones, P.J., 1980, Ph.D. Thesis, University of Queensland. Jones, D.R. and Davidson, J.F., 1965, Rheologica Acta 4, 180. Jones, P.J. and Leung, L.S., 1977, Proceedings of 5th National
Chemical Engineering Conference, Canberra, Inst. of Chem. Engrs. in Aust., 322.
Judd, M.R. and Dixon, P.D., 1976, “The flow of fine dense solids down a vertical standpipe”, paper presented at AIChE Annual Conference, Chicago, December.
Judd, M.R. and Rowe, D.N., 1978 in Fluidization, Ed. Davidson, J.F. and Keairns, D.L., Cambridge University Press, 110.
Kaskas, A., 1960, Diploma Research Thesis, Lehrstuhl fur Verfahrens Technik, Berlin.
Keairns, D.L. et al., 1973, “Evaluation of the fluid–bed combustion process”, Vol. II, EPA–650/2–73–0486.
Kehoe, P.W.K. and Davidson, J.F., 1971, Inst. Chem. Engrs. ( London) Symp. Series, 33, 97.
Knowlton, T.M., 1979, “Solids transport – state-of-the-art and research needs”, in N.S.F. Workshop on Fluidization, H. Littman, editor.
Knowlton, T.M., Aquino, C., Hirsen, I. and Siohtla, C., 1979, “Void gas stripping in standpipes”, AIChE Annual Meeting, San Francisco.
Knowlton, T.M. and Bachondin, D.M., 1976, in, “Fluidization Technology”, editors Keairns, D.L. et al., 2, 253, Hemisphere Publishing Corporation.
Knowlton, T.M. and Hirsen, I., 1978, Hydrocarbon Processing, 57, 149. Knowlton, T.M., Hirsen, I. and Leung, L.S., 1978 in Fluidization, Eds. Davidson, J.F. and Keairns, D.L., 128.
Kojabashian, C., 1958, Ph.D. Thesis, Massachusetts Institute of Technology.
Konno, H. and Saito, S., 1967, J. Chem. Eng. Japan, 31, 211. Krotzsch, P., 1972, Chem. Ing. Tech., 44, 1354.
Kunii, D. and Levenspiel, 0., 1969, “Fluidization Engineering”, 13, J. Wiley, New York.
Kwauk, Mooson, 1974, in Proceedings 1st Iranian Congress of Chemical
Engineering, ed. Davalloo, P. et al. 2, 539, Elsevier. LaNauze, R.D. and Davidson, J.F., 1976, in Fluidization Technology, eds. Keairns, D.L. et al. 2, 113, Hemisphere Publishing, Washington.
Lapidus, L. and Elgin, J.C., 1957, AIChE J., 3, 63.
Lapple, C.E. and Shepherd, C.B., 1940, Ind. Eng. Chem., 32, 605. Ledinegg, M., 1938, Die Warme, 61, 891.
Leung, L.S., 1976, in Fluidization Technology, Vol. II Ed. Keairns D.L. et al. 125, Hemisphere Publishing, Washington Leung, L.S., 1977, Powder Technology, 16, 1.
Leung, L.S., 1976, in Fluidization Technology, Vol. II Ed. Keairns D.L. et al. 125, Hemisphere Publishing, Washington Leung, L.S., 1977, Powder Technology, 16, 1.
Leung, L.S. and Jones, P.J., 1978a, “Coexistence of fluidized solids flow and packed flow in standpipes”, Proc. International Fluidization Conference, Ed. Davidson, J.F. Cambridge University Press, 116.
Leung, L.S. and Jones, P.J., 1978b, Powder Technology, 20, 145. Leung, L.S. and Jones, P.J., 1980, “Gas-solid downflow in standpipes” in Multiphase Science and Technology Series, Hemisphere Publishing - to be published.
Leung, L.S., Jones, P.J. and Knowlton, T.M., 1977, Powder Technology, 19, 7.
Leung, L.S. and White, E.T., 1977, Chem. Engr. in Aust. 2, 1. Leung, L.S. and Wiles, R.J., 1976, Ind. Eng. Chem. Process Design and Development, 15, 552.
Leung, L.S., Wiles, R.J. and Nicklin, D.J., 1969, Trans. Inst. Chem. Engrs., 47, T271.
Leung, L.S., Wiles, R.J. and Nicklin, D.J., 1971, Ind. Eng. Chem. Process Design and Development, 10, 183.
Leung, L.S., Wiles, R.J. and Nicklin, D.J., 1972, Proceedings of Pneumotransport 1, BHRA Fluid Engineering, B93.
Leung, L.S. and Wilson, L.A., 1973, Powder Technology, 7, 343. McDougall, I.R. and Evans, A.C., 1966, Trans. Inst. Chem. Engrs., 44, T15.
McDougall, I.R. and Knowles, G.H., 1969, Trans. Inst. Chem. Engrs., 47, T73.
Massimilla, L., Betta, V. and Della Rocca, C., 1961, AIChE J. 77, 502.
Matsen, J.M., 1973, Powder Technology, 7, 93.
Matsen, J.M., 1976, in “Fluidization Technology”, Vol. II, ed. Keairns, D.L. et al., 135, Hemisphere Publishing, Washington.
Matsen, J.M., 1979, Entrainment research: achievements and opportunities, in N.S.F. Workshop on Fluidization, ed. H. Littman.
Matsen, J.M., Hovmand, S. and Davidson, J.F., 1969, Chem. Eng. Sci., 24, 1743.
Modi, M.V., Talwalker, A.T. and Punwani, D.V., 1978, Pressure drop correlations for designing vertical dilute-phase gas-solids lift lines for materials used in coal conversion processes“, Proc. Int. Powder and Bulk Solids Handling and Processing Conference, Powder Advisory Centre, Chicago.
Molerus, O., 1967, Chem. Eng. Techn., 39, 341.
Nakamura, K. and Capes, C.E., 1973, Can. J. Chem. Eng., 51, 39. Ormiston, R.M., Ph.D. Thesis, University of Cambridge, 1966. Papazoglou, C.S. and Pyle, D.L., 1970, Powder Technology, 4, 9. Pigford, R.L. and Baron, T., 1965, Ind.
Eng. Chem. Fund., 4, 81. Punwani, D.V., Modi, M.V. and Tarman, P.B., 1976, “A generalized correlation for estimating choking velocity in vertical solids transport”, Proc. Int. Powder and Bulk Solids Handling and Processing Conference, Powder Advisory Centre, Chicago.
Resnich, W., Heled, Y., Klein, A. and Palm, E., 1966, Ind. Eng. Chem. Fundamentals 5, 392.
Richardson, J.F. and Zaki, W.N., 1954, Trans. Inst. Chem. Engrs., 32, 35.
Rose, H.E. and Duckworth, R.A., 1969, The Engineer, 227, 392, 430, 478.
Scott, A.M., 1977, “Pneumatic conveyor design - art or science?” Proc. 4th Int. Powder Technology and Bulk Solids Conference 10, Powder Advisory Conference, Harrogate.
Slis, P.L., Willemse, Th.W. and Kramers, H., 1959, H. App. Sci. Research, A8, 202.
Smith, T.N., 1978, Chem. Eng. Sci., 33, 745.
Soo, S.L., 1967, “Fluid Dynamics of Multiphase Systems”, 279, Blaisdell Publishing Co., Waltham, Mass.
Soo, S.L., 1967, “Fluid Dynamics of Multiphase Systems”, 279, Blaisdell Publishing Co., Waltham, Mass.
Stermerding, S., de Groot, J.H. and Kuypers, G.M.J., 1963, Proc. Fluidization Symposium Society of Chemical Industries, London.
Takahashi, H. and Yanai, H., 1973, Powder Technology 7, 205. Tanaka, I., Yoshihara, N. and Shinohara, H., 1978a, Kagaku Kogaku Ronbunshu, 4, 241.
Tanaka, I., Yoshihara, N. and Shinohara, H., 1978b, Kagaku Kogaku Ronbunshu, 4, 317.
Toyama, S., 1971, Powder Technology, 4, 214.
Trees, J., 1962, Trans. Inst. Chem. Engrs., 40, 286.
Van Swaaij, W.P.M., Buurman, C., Van Breugel, W.C., 1970, Chem. Eng. Sci., 25, 1818.
Walker, D.M., 1966, Chem. Eng. Sci., 21975.
Wallis, G.B., 1969, “One Dimensional Two-Phase Flow”, 93, McGraw-Hill Book Company.
Walters, J.K., 1973, Chem. Eng. Sci., 28, 13.
Wen, C.Y. and Galli, A.F., 1971, in Fluidization, Davidson, J.F. and Harrison, D., Academic Press.
Wen, C.Y. and Simons, H.P., 1959, AIChE J. 5, 263.
Wen, C.Y. and Yu, Y.H., 1966, Chem. Eng. Prog. Symposium Series 62, 62, 100.
Williams, J.C., 1977, Chem. Eng. Sci., 32, 247.
Yang, W.C., 1973, Ind. Eng. Chem. Fundamentals, 12, 349.
Yang, W.C., 1977a, Proceedings of Pneumotransport 3, BHRA Fluid Engineering, E49.
Yang, W.C., 1977b, “A correlation for friction factor for vertical pneumatic conveying lines”, Proc. Int. Powder and Bulk Solids Handling and Processing Conference, Powder Advisory Centre, Chicago.
Yerushalmi, J. and Cankurt, N.T., 1979, Powder Technology, 24, 187. Yerushalmi, J., Cankurt, N.T., Geldart, D. and Liss, B., 1978, Chem. Eng. Prog. Symp. Series, 176, 1.
Yerushalmi, J., Turner, D.H. and Squires, A.M., 1976, Ind.Eng. Chem. Process Design and Development, 15, 47.
Yoon, S.M. and Kunii, D., 1973, Ind. Eng. Chem. Process Design and Development, 9, 559.
Yousfi, Y. and Gau, G., 1974, Chem. Eng. Sci., 29, 1939. Zenz, F.A., 1949, Ind. Eng. Chem., 41, 2801.
Zenz, F.A., 1976, “Fluidization Technology”, Vol. II, Ed. Keairns, D.L. et al., 239, Hemisphere Publishing, Washington. Zenz, F.A. and Othmer, D.F., 1960, “Fluidization and Fluid Particle Systems”, Reinhold Publishing, N.Y.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1980 Plenum Press, New York
About this chapter
Cite this chapter
Leung, L.S. (1980). The Ups and Downs of Gas-Solid Flow - A Review. In: Grace, J.R., Matsen, J.M. (eds) Fluidization. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-1045-7_2
Download citation
DOI: https://doi.org/10.1007/978-1-4684-1045-7_2
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-1047-1
Online ISBN: 978-1-4684-1045-7
eBook Packages: Springer Book Archive