Abstract
Corrosion of automobile bodies became a severe problem in the 1950’s, due to the increased use of salt for the deicing of roads. The essentially flat outer surfaces of an automobile body were reasonably well protected against the corrosive action of salt and environment through a paint coat. The automotive bodies however corroded from the inside out. A paint application process was needed which would protect both inner and outer surfaces with a uniformly thin paint film.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Bibliography
Bogart, H. N., Burnside, G. L., and Brewer, G. E. F.: “The Concept and Development of the Ford Electrocoating System.” S. A. E. paper 650270 (988A), January 1965.
Frangen, K. H.: “Die Electrophorese,” Farbeund Lack, Vol. 70, No. 4, pp. 271–279, (1964), and Vol. 12, No. 1, pp. 36–50, (1966).
Ranney, M. W., “Electrodeposition and Radiation Curing,” Noyes Data Corp., Park Ridge, N. J. 07656, U. S. A., 1970.
Yeates, R. L. “Electropainting,” Draper Ltd., England, 1969.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1973 Plenum Press, New York
About this paper
Cite this paper
Brewer, G.E.F. (1973). Quantitative Prediction of Recycling Efficiency of Electrocoating Paint Solids Through Ultrafiltrate Rinse. In: Gardon, J.L., Prane, J.W. (eds) Nonpolluting Coatings and Coating Processes. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-0736-5_8
Download citation
DOI: https://doi.org/10.1007/978-1-4684-0736-5_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-0738-9
Online ISBN: 978-1-4684-0736-5
eBook Packages: Springer Book Archive