Abstract
Most of the synthetically manufactured macromolecular substances are used as plastic materials in the materials science sense. In order to make a plastic material of a macromolecular substance, it must be equipped with antioxidants, fillers, lubricants, etc. Such protective additives are intended to improve the mechanical, electrical, and/or chemical properties of the plastic, simplify its processing, and give it a suitable, acceptable appearance or finish. Compounding is the controlled addition of such additives to the macromolecular substance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literature
Reviews
Reviews in Polymer Technology,M. Dekker, Vol. 1 (1972).
Section 12.1.1. Preparation
O. Lauer and I. Engles, Aufbereiten von Kunststoffen, Hanser, Munich, 1971.
Section 12.1.2. Fillers
S. Oleesky and G. Mohr, Handbook of Reinforced Plastics, Reinhold, New York, 1964.
G. Kraus, E., Reinforcement of Elastomers, Interscience, New York, 1965.
W. S. Penn, GFP Technology, MacLaren, London, 1966.
P. H. Selden, ed., Glasfaserverstärkte Kunststoffe,Springer, Berlin, 1967 (third ed. of H. Hagen, Glasfaserverstärkte Kunststoffe).
R. T. Schwartz and H. S. Schwartz, Fundamental Aspects of Fiber Reinforced Plastic Composites, Interscience, New York, 1968.
W. C. Wake, ed., Fillers fir Plastics, Iliffe, London, 1971.
P. D. Ritchie, ed. Plasticizers, Stabilizers and Filler, Butterworths, London 1972.
G. Kraus, Reinforcement of elastomers by carbon black, Adv. Polym. Sci.—Fortschr. Hochpolym. Forschg. 8, 155 (1971).
J. Gilbert Mohr. ed., SPI Handbook of Technology and Engineering of Reinfirced Plastics/Composites, second ed., Van Nostrand Rheinhold, New York, 1973.
L. Mascia, The Role of Additives in Plastics, Halsted, New York, 1975.
Section 12.1.3. Dyestuffs and Pigments
C. H. Giles, The coloration of synthetic polymers—a review of the chemistry of dyeing of hydrophobic fibers, Br. Polym. J. 3, 279 (1971).
T. B. Reeve, Organic colorants for polymers, J. Macromol. Sci. D (Rev. Polym. Technol.) 1, 217 (1972).
T. C. Patton, ed., Pigment Handbook (3 vol.), Wiley—Interscience, New York, 1973.
R. R. Myers and J. S. Long, Pigments, Part I, M. Dekker, New York, 1975.
Section 12.1.4. Plasticizers
K. Thinius, Chemie, Physik und Technologie der Weichmacher, Verlag Technik, Berlin, 1960.
I. Mellan, Industrial Plasticizers, Pergamon, Oxford, 1963.
P. D. Ritchie, ed., Plasticizers, Stabilizers and Fillers, Butterworths, London, 1971.
Section 12.2. Processing of Thermoplasts, Thermosets, and Elastomers
J. A. McKelvey, Polymer Processing, Wiley, New York, 1962.
T. H. Ferrigno, Rigid Plastic Foams, Reinhold, New York, 1963.
E. G. Fisher, Extrusion of Plastics, second ed., Wiley-Interscience, New York, 1964.
H. Götze, Schaumkunststoffe, Strassenbau, Chemie und Technik Verlagsges., Heidelberg, 1964.
J. S. Walker and E. R. Martin, Injection Molding of Plastics, Butterworths, London, 1966.
D. V. Rosato and C. S. Grove, Jr., Filament Winding, Wiley-Interscience, New York, 1968.
W. Schaaf and A, Hahnemann, Verarbeitung von Plasten, VEB Deutscher Verlag für Grundstoffindustrie, Leipzig, 1968.
O. J. Sweeting, The Science and Technology of Polymeric Films, 2 vols. Wiley-Interscience, New York, 1968.
B. S. Benjamin, Structural Design with Plastics, Van Nostrand Reinhold, New York, 1969.
H. Domininghaus, Kunststoffe II (Kunststoffverarbeitung), VDI Taschenbücher, T 8, VDI-Verlag, Düsseldorf, 1969.
A. Kobayashi, Machining of Plastics, McGraw-Hill, New York, 1969.
L. I. Naturman, Cold forming, where to next? Plast. Technol. 15 (4), 39 (1969).
W. S. Penn, ed., Injection Molding of Elastomers, MacLaren, London, 1969.
J. V. Schmitz, Bibliography on Polymer Testing, Processing and Applications, Soc. Plastics Engineers. Inc., and Plastics Institute of America, Inc., New York, 1969.
K. Stoeckhert, Formenbau für die Kunststoff-Verarbeitung, C. Hanser, Munich, 1969.
W. R. R. Park, Plastics Film Technology, Van Nostrand Reinhold, London, 1970.
C. M. Blow, ed., Rubber Technology and Manufacture, Butterworths, London, 1971.
R. E. Elder and A. D. Swan, Calendering of Plastics, Riffe, London, 1971.
E. G. Fisher, Blow Molding of Plastics, Butterworths, London, 1971.
A. Höger, Warmformen von Kunststoffen, C. Hanser, Munich, 1971.
E. Meinecke, Mechanical Properties of Polymeric Foams, Technometric Publ., Westport, Connecticut, 1973.
M. Morton, ed., Rubber Technology, second ed., Van Nostrand Reinhold, New York, 1973.
P. C. Powell, Plastics for Industrial Designers, The Plastics Institute, London, 1973.
I. I. Rubin, Injection Molding-Theory and Practice, Wiley-Interscience, New York, 1973.
W. A. Holmes-Walker, Polymer Conversion, Wiley, New York, 1975.
Section 12.3. Fiber Processing
J. W. S. Hearle and R. H. Peters, Fiber Structure, Butterworths, London, 1963.
R. H. Peters, Textile Chemistry, Elsevier, Amsterdam, 1963.
H. Rath, Lehrbuch der Textilchemie, second ed., Springer, Berlin, 1963.
L. R. McCreight, H. W. Rauch, Sr., and W. H. Hutton, Ceramic and Graphic Fibers and Whiskers, Academic Press, New York, 1965.
W. Bernard, Praxis des Bleichens und Färbens von Textilen, Springer, Berlin, 1966.
O. A. Battista, ed., Synthetic Fibers in Papermaking, Wiley-Interscience, New York, 1968.
H. F. Mark, S. M. Atlas, and E. Cernia, eds., Man-Made Fibers, 3 vols., Wiley-Interscience, New York, 1968.
H. Balk, Fibrillieren-Ein neues Verfahren zur Herstellung von Synthesefasern, Kunststoff-Berater 15, 1091 (1970).
K. Meyer, Chemiefasern (types, trade names, producers), VEB Fachbuchverlag, second ed., Leipzig, 1970, Supplement volume, 1971.
H. Mark, N. S. Wooding, and S. M. Atlas, Chemical After-treatment of Textiles, Wiley, New York, 1971.
C. Placek, Multicomponent Fibers, Noyes Development, Pearl River, 1971.
R. Jeffries, Bicomponent Fibers, Merrow Publ., Watford, England, 1972.
R. W. Moncrieff, Man-Made Fibers, sixth ed., Halsted Press, New York, 1975.
Section 12.4. Surface Treatment
G. Kühne, Bedrucken von Kunststoffen, Hanser, Munich, 1967.
P. Schmidt, Beschichten von Kunststoffen, Hanser, Munich, 1967.
B. Rotrekl, K. Hudecek, J. Komarek, and J. Stanek, Surface Treatment of Plastics, Khimiya Publ, Leningrad, 1972 ( Russian).
Construction with Plastics
E. Baer, ed., Engineering Design for Plastics, Reinhold, New York, 1974.
B. S. Benjamin, Structural Design with Plastics, Von Nostrand Reinhold, New York, 1969.
G. Schreyer, Konstruieren mit Kunststoffen, Hanser, Munich, 1972.
P. C. Powell, Plastics for Industrial Designers, The Plastics Institute, London 1973.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1977 Springer Science+Business Media New York
About this chapter
Cite this chapter
Elias, HG. (1977). Compounding and Processing of Plastics. In: Macromolecules. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-7364-7_12
Download citation
DOI: https://doi.org/10.1007/978-1-4615-7364-7_12
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4615-7366-1
Online ISBN: 978-1-4615-7364-7
eBook Packages: Springer Book Archive