Abstract
In the following, direct fabrication of high-density metal and ceramic structures is discussed. This discussion is primarily centered on the SLS (Selective Laser Sintering) process, but a brief discussion of other direct techniques is given at the end of this chapter. All of these techniques (including SLS) are still in the research stage.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Agarwala, M., D. Bourell, J. Beaman, H. Marcus, J. Barlow, “Post-Processing of Selective Laser Sintered Metal Parts”, Rapid Prototyping Journal, vol. 1#2, 1995, pp. 36–44.
Agarwala, M. K., David L. Bourell, Joseph J. Beaman, Benny Wu and H.L. Marcus, “Structurally Sound Metal Parts by Selective Laser Sintering”, Proceedings of the 123rd TMS-AIME Annual Meeting, Gary Warren, ed., San Francisco CA, 1994, pp. 833–851.
Agarwala, M.K., “Synthesis, Selective Laser Sintering and Post Processing of Metal and Ceramic Composites”, Ph.D. Dissertation, University of Texas at Austin, 1994.
Agarwala, M., D.L. Bourell, B. Wu and J.J. Beaman, “An Evaluation of the Mechanical Behavior of Bronze-Nickel Composites Produced by Selective Laser Sintering”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1993, pp. 193–203.
Agarwala, M., D.L. Bourell, A. Manthiram, B.R. Birmingham and H.L. Marcus, “Synthesis, Selective Laser Sintering and Infiltration of High Tc Dual Phase Y2BaCu3O7-x Superconductor Composites”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1993, pp. 339–349.
Ashby, M.F., Sintering and Isostatic Pressing Diagrams, 6;, Cambridge, England CB2 1PZ, Department of Engineering, Trumpington St, 1990.
Baumgart, W., A.C. Dunham and G.C. Amstutz, Process Mineralogy of Ceramic Materials,, Stuttgart, Germany, Ferdinand Enke Verlag, 1984.
Bourell, D.L., H.L. Marcus and Wendy L. Weiss: “Selective Laser Sintering of Parts by Compound Formation of Precursor Powders”, US Patent #5, 156, 697, issued October 20, 1992.
Bourell, D. L., H. L. Marcus, J. W. Barlow and J. J. Beaman, “Selective Laser Sintering of Metals and Ceramics”, Intl. J. Powd. Metall., 1992, 28#4, pp. 369–381.
Bourell, D.L., H.L. Marcus, J.W. Barlow, J.J. Beaman, C.R. Deckard, “Multiple Material Systems for Selective Beam Sintering”, Patent #4, 944, 817, issued July 31, 1990.
Bunnell, D.E., S. Das, D.L. Bourell, J.B. Beaman and H.L. Marcus, “Fundamentals of Liquid Phase Sintering During Selective Laser Sintering”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1995, pp.440–447.
Bunnell, D.E., D.L. Bourell and H.L. Marcus, “Fundamentals of Liquid Phase Sintering Related to Selective Laser Sintering”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1994, pp. 379–386.
Bunnell, D.E., “Fundamentals of Selective Laser Sintering of Metals”, PhD Dissertation, The University of Texas at Austin, Austin, Texas, 1995.
Cottle, R.D., Britton Birmingham, Zwy Eliezer and H.L. Marcus: “Selective Laser Sintering, Preparation and Tribological Testing of Nanostructured Tungsten Carbide-Cobalt Composites”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1995, pp.369–373.
Davé, V.R., J.F. Matz, and T.F. Eagar, “Electron Beam Solid Freeform Fabrication of Metal Parts”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1995, pp. 64–71.
Dickens, P.M., M.S. Pridham, R.C. Cobb, I. Gibson, and G. Dixon, “Rapid Prototyping Using 3D Welding”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, Austin, Texas, 1992, pp. 280–90.
Frenkel, J., “Viscous Flow of Crystalline Bodies under the Action of Surface Tension,” J. Phys. (USSR), 1945, 9, pp. 385–391.
German, R.M., Liquid Phase Sintering, 1985, New York, Plenum Press.
German, R.M., Powder Metallurgy Science, 1984, Princeton NJ, Metal Powder Industries Federation, pp. 234–252.
German, R.M., “Supersolidus liquid phase sintering. II Densification theory”, Int’l. J. Powder Metall, 1990, 26#1, 35–43.
Griffith, M.L., D.M. Reicher, C.L. Atwood, J.A. Romero, J.E. Smugeresky, L.D. Harwell, D.L. Greene, “Free Form Fabrication of Metallic Components Using Laser Engineered Net Shaping (LENS)”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1996, pp. 121–128.
Haase, P.: “Selective Laser Sintering of Metal Powders”, MS Thesis, University of Texas at Austin, 1989.
House, M. A., E. J. Whitney, D. G. Krantz, and F. G. Arcella, “Rapid Laser Forming of Titanium Near Shape Articles: LaserCast”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1996, pp. 232–241.
Lakshminarayan, U., S. Ogrydziak and H.L. Marcus: “Selective Laser Sintering of Ceramic Materials”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1990, pp. 16–26.
Lakshminarayan, U. and H.L. Marcus: “Microstructural and Mechanical Properties of Al2O3/P2O5 and Al2O3/B2O3 Composites Fabricated by Selective Laser Sintering”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1991, pp. 205–212.
Manriquez-Frayre, J.A. and D.L. Bourell: “Selective Laser Sintering of Binary Metallic Powder”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1990, pp. 99–106.
Manriquez-Frayre, J.A. and D.L. Bourell: “Selective Laser Sintering of Cu-Pb/Sn Solder Powders”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1991, pp. 252–260.
Manthiram, A., F. Chi, L.F. Johnson, B.R. Birmingham and H.L. Marcus: “Development of Nanocomposites for Solid Freeform Fabrication”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1993a, pp. 4–73.
Manthiram, A., D.L. Bourell and H.L. Marcus, “Nanophase materials in solid freeform fabrication”, JOM, 1993b, 45#11, 66–70.
Marcus, H.L., J.J. Beaman, J.W. Barlow and D.L. Bourell: Am. Ceram. Soc. Bull., 1990, 69#6, 1030–1031.
Massalski, T.B., ed., Alloy Phase Diagrams, 2 edn,, Materials Park OH, ASM International, 1990, p. 2864.
Melvin III, L.S. and J.J. Beaman: “The Application of an Artificial Body Force to the Selective Laser Sintering Process”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1992, pp. 118–123.
Melvin III, L.S. and J.J. Beaman: “The Electrostatic Application of Powder for Selective Laser Sintering”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1991, pp. 171–177.
Metzner, A.B., “Rheology of suspensions in polymeric liquids”, J. Rheology, 1985, 29, 739–75.
Nyrhila, O., “Manufacture of dimensionally precise pieces by sintering”, US Patent 5, 061, 439, 1991.
Orme, M.E., C. Huang, “Thermal design parameters critical to the development of Solid Freeform Fabrication of structural materials with cintrolled nano-liter droplets”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1995, pp. 88–95.
Pinsky, D.A., P.O. Charreyron and M.C. Flemings, “Compression of semi-solifd dendritic Sn-Pb alloys at low strain rates”, Met. Trans. B, 1984, 15, p. 173.
Prabhu, G. and D.L. Bourell: “Supersolidus Liquid Phase Selective Laser Sintering of Prealloyed Bronze Powder”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1993, pp. 317–324.
Rao, T.S., D.L. Bourell and H.L. Marcus: “Densification Behavior of SLS Processed A12O3/Al Composite”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1995, pp. 374–380.
Scherer, G.W., “Sintering of low-density glasses. I. Theory”, J. Am. Ceram. Soc., 1977, 60#5–6, 236–239.
Scherer, G.W., “Viscous sintering under a uniaxial load”, J. Am. Ceram. Soc., 1986, 69#9, C206–207.
Sindel, M., T. Pintat, M. Greul, O. Nyrhila, and C. Wilkening, “Direct laser sintering of metals and metal infiltration for near net shape fabrication of components”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1994, pp. 94–101.
Subramanian, P.K., G. Zong, and H.L. Marcus: “Selective Laser Sintering and Reaction Sintering of Ceramic Composites”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1992, pp. 63–71.
Suery, M. and M.C. Flemings, “Effect of strain rate on deformation behavior of semi-solid dendritic alloys”, Met. Trans. A, 1982, 13, pp. 1809–19.
Sun, M.M., J.C. Nelson, J.J. Beaman, and J.W. Barlow: “A Model for Partial Viscous Sintering”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1991, pp. 46–55.
Swinkels, F.B. and M.F. Ashby, “Mechanisms of hot-isostatic pressing”, Acta Metall., 1981, 29, pp. 259–281.
Vail, N.K. and J.W. Barlow: “Effect of Polymer Coatings as Intermediate Binders on Sintering of Ceramic Parts”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1991, pp. 195–204.
Weiss, W.L.: “The Formation of Intermetallics by Selective Laser Sintering”, MS Thesis, University of Texas at Austin, 1991.
Weiss, W. L. and D.L. Bourell, “Selective Laser Sintering of Intermetallics”, Metallurgical Transactions A, 24A, 1993, pp. 757–759.
Wildemuth, C.R. and M.C. Williams, “Viscosity of suspensions modeled with a shear-dependent maximum packing fraction”, Rheologica Acta, 1984, 23, p. 627.
Zong, G., Y. Wu, N. Tran, I. Lee, D.L. Bourell, J.J. Beaman and H.L. Marcus: “Direct Selective Laser Sintering of High Temperature Materials”, Solid Freeform Fabrication Proceedings, The University of Texas, Austin, Texas, 1992a, pp. 72–85.
Zong, G., Y. Wu, H.L. Marcus, D.L. Bourell, and J.J. Beaman: “Direct Solid Freeform Fabrication of High Temperature Materials Using Selective Laser Sintering”, in Proc. of the Symposium on Processing and Fabrication of Advanced Materials for High Temperature Applications — II, (V.A. Ravi and T.S. Srivatsan, eds), Chicago IL, Nov. 1–5, 1992b, The Metals, Minerals and Mining Society, pp. 503–518.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media New York
About this chapter
Cite this chapter
Beaman, J.J., Barlow, J.W., Bourell, D.L., Crawford, R.H., Marcus, H.L., McAlea, K.P. (1997). Direct SLS Fabrication of Metals and Ceramics. In: Solid Freeform Fabrication: A New Direction in Manufacturing. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-6327-3_7
Download citation
DOI: https://doi.org/10.1007/978-1-4615-6327-3_7
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-7923-9834-9
Online ISBN: 978-1-4615-6327-3
eBook Packages: Springer Book Archive