Abstract
Modification of monolithic substrate surfaces by coating them with a substance different from that of the bulk is currently an important technological issue in structural as well as in functional applications such as: thermal and chemical barriers, wear resistance and tribology, environmental sensors, fibre-reinforced ceramic composites, catalysis, etc.1 Ceramic coatings can be used to enhance the mechanical, chemical, electrical, optical or thermal properties of substrates, or to impart physical and mechanical properties of the substrates not normally possessed by the substrate itself. Although a wide variety of surface modification techniques are available, e.g. thermal spray processes, sol-gel or slurry methods, chemical vapour deposition (CVD), physical vapour deposition (PVD), etc., it is generally very difficult to modify the surface to any significant depth (i.e. >2 (tim) by these routes. This fact limits the adhesion and the possible applications of the obtained coated materials. The solution to this problem requires an increased understanding of chemical and mechanical bonding at the coating-bulk interface.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R.A. Eppler. Ceramic and Glasses. Engineered Materials. Handbook Vol. 4., ASM international, The Matrials Information Society, pp. 991–3 (1991).
J.V. Hoek. Alkali Metal Corrosion of Alumina, Thermodynamics, Phase Diagrams and Testing, Ph.D. Thesis, Tech. University Eindhoven, Netherlands, (1990).
E. Criado, S. De Aza, and D.A. Estrada, Caracteristicas dilatométricas de los aluminatos de calcio, Bol. Soc. Esp. Ceràm. Vidr. 14, 3, pp. 271–3 (1975).
D.H. Lister, and F.P. Glasser, Phase relations in the system CaO-Al2O3-iron oxide, Trans. Brit. Ceram. Soc., 66 pp. 293–305 (1967).
E. Criado, and S. De Aza, Calcium hexaluminate as refractory material, UNITECR’91, Vol. I, pp. 566–74, Aechen, Germany (1991).
P. Pena, and S. De Aza, Compatibility relations in the system ZrO2-Al2O3-SiO2-CaO, J. Am. Ceram. Soc., 67, C-3–5 (1984).
A.B. Harker, and J.F. Flimtoff, Hot isostatically pressed ceramic and glasses forms for immobilizing Hanford high-level wastes, Adv. Ceram., 8, pp. 222–33 (1984).
J.D. Hodge, Alkaline earth effects on the reaction of sodium with aluminium oxides, J. Electrochem. Soc. 133, 4, pp. 833–6 (1986).
A.H. De Aza, P. Pena, and S. De Aza, Research submitted to the J. Am. Ceram. Soc.
I. Kohatsu, and G.W. Brindley, Solid state reactions between CaO and ∝-A12O3, Zeitschr. Phys. Chem. Neue Folge, Bd. 60, pp. 79–89 (1968).
D. Brooksbank, Thermal expansion of calciumaluminate inclusions and relation to tessellated stresses, J. of The Iron and Steel Institute, May, pp. 495–9 (1970).
D.C. Hitchcock, and L.C. De Jonghe, Fracture toughness anisotropy of sodium ß-alumina, J. Am. Ceram. Soc., 11, 0204–5(1983).
M.K. Cinibulk, Magnetoplumbite compounds as a fiber coating in oxide/oxide composites, Ceram. Eng. Sci. Proc., 15, [5], 721–8 (1994).
P.E.D. Morgan, and D.B. Marshall, Ceramic composites of monazite and alumina, J. Am. Ceram. Soc., 78, [6],1553–63 (1995).
Y. Zhang, and P.K. Davis, Stabilization of ordered zirconium titanates through the chemical substitution of Ti4+ by Al3+/Ta5+, J. Am.Ceram. Soc. 77, [3], 743–8 (1994).
Y.-c. Heiao, L. Wu, and C.-c. Wei, Microwave dielectric properties of (ZrSn)TiO4 ceramic, Mater.Res.Bull. 23, [12], 1687–92 (1988).
F. Azough, and R. Freer, Microstructural development and microvave dielectric properties of zirconium titanate ceramics sintered with Nd2O3, Euro-Ceramics Vol.2, 2.294–8 (1989).
G. Wolfram, and E. Göbel, Existence range, structural and dielectrical properties of ZrxTiySnzO4 ceramics (x+y+z=2), Mater. Res. Bull. 16, [11], 1455–63 (1981).
J.A. Navio, M. Macias, and P.J. Sanchez-Soto, Influence of chemical processing in the crystallization behaviour of zirconium titanate materials, J. Mater. Sci. Lett. 11, [23], 1570–2 (1992).
F.Z. Hund, Mixed-phase pigments based on ZrTiO4, Anorg.Allg.Chem. 525, 221–9 (1985) (Ger.).
J.S. Moya, A.H. de Aza, H.P. Steier, J. Requena and P. Pena, Reactive coating on alumina substrates. Calcium and barium hexa aluminates, Script. Met. et Mat. 31, [8], 1049–54 (1994).
M. A. Sainz, R. Torrecillas, and J. S. Moya, Novel Technique for Zirconia-Coated Mullite, J. Am. Ceram. Soc. 76, [7], 1869–72 (1993).
N.C.H. Lubaba, C. M. Wilson, and N. H. Brett, Phase equilibria and solid solution relationships in the system ZrO2-SiO2-TiO2, Br. Ceram. Trans J. 83, 49–54 (1984).
K. Yamashita, T. Hamano, T. Kaga, K. Koumoto and H. Yanagida, The thickness-dependence of dielectric and physical properties of BaTiO3 ceramic thick films, Jap. J. Appl. Phys. 22, [4], 580–4 (1983).
Y. Ohara, T. Taki, K. Koumoto and H. Yanagida, Crystal-axis oriented ceramics prepared from fibrous barium titanate, J. Mater. Sci. Let. 11, 1327–9 (1992).
N.C. Sharma, and E.R. McCartney, The dielectric properties of pure barium titanate as a function of grain size, J. Austral. Ceram. Soc. 10, [1], 16–20 (1974).
P.S. Brody, B.J. Rod, K.W. Bennett, L.P. Cook, P.K. Schenk, M.D. Vaudin, W. Wong-Ng and C.K. Chiang, Preparation, Microstructure and ferroelectric properties of laser-deposited thin BaTiO3 and lead zirconate-titanate films, Integr.Ferr. 1, 239–51 (1992).
P.P. Phule and S.H. Risbud, Low temperature synthesis and processing of electronic materials in the BaO-TiO2 system, J. Mat. Sci. 25, 1169–83 (1990).
H.M. O’Bryan, Jr., and J. Thompson, Jr., Phase equilibria in the TiO2-rich region of the system BaO-TiO2, J. Am. Ceram. Soc. 57, [12], 522–6 (1974).
R. Torrecillas, M.A. Sainz, and J.S. Moya, Alumina-alumina and mullite-mullite joining by reaction sintering process, Script. Met. et Mat. 31, 1031–6 (1994).
R.D. Watkins, in ASM Eng. Mat. Handbook Vol. 4, Ceramics and Glasses, 478–81 (199
H.P. Kirchner, J.C. Conway Jr., and A.E. Segall, Effect of joint thickness and residual stress on the properties of ceramic adhesive joints. I: Finite element analysis of stresses in joints J. Am. Ceram. Soc. 70, 104–8 (1987).
R.N. Singh, Influence of high-temperature exposure on mechanical properties of zircon-silicon carbide composites, J. Mat. Sci., 26, 1, 117–26 (1991).
R.N. Singh, High temperature mechanical properties of a uniaxilly reinforced zircon-silicon carbide composite, J. Am. Ceram. Soc., 73.,[8], 2399–406 (1990).
J. Llorca, R.N. Singh, Influence of fiber and interfacial properties on fracture behaviour of fiber-reinforced ceramic composites, J. Am. Ceram. Soc. 74, [11], 2882–9 (1991).
S.K. Reddy, S. Kumar, R.N. Singh, Residual stresses in silicon carbide-zircon composites, J. Am. Ceram. Soc. 77, [12], 3221–6 (1994)
P. Pena, and S. de Aza, Compatibility relationships of Al2O3 and ZrO2 in the system ZrO2-Al2O3-SiO2-CaO, Adv. In Ceram. Vol. 12, 174–80 (1984).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Science+Business Media New York
About this chapter
Cite this chapter
Moya, J.S., Requena, J., Steier, H.P., De Aza, A.H., Pena, P., Torrecillas, R. (1998). Reactive Coatings on Ceramic Substrates. In: Tomsia, A.P., Glaeser, A.M. (eds) Ceramic Microstructures. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-5393-9_44
Download citation
DOI: https://doi.org/10.1007/978-1-4615-5393-9_44
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-7462-6
Online ISBN: 978-1-4615-5393-9
eBook Packages: Springer Book Archive