Abstract
In the last Diagnostic Workshop, which took place at the mid-point of the ITER EDA, the ITER machine design and physics performance was presented [1] based on the Interim Design Report (IDR). Whereas the design of several major machine components (e.g. TF-coils) were changed considerably compared to the earlier Outline Design (OD), it was pointed out at the time that the overall objectives and the plasma performance remained in line with the requirements stated by the Special Working Group(SWG 1).
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. Parker, et.al, Proceedings of Diagnostic Workshop, Varenna, September 1995.
C. Walker, et.al. this conference.
J. G. Cordey, Energy Confinement Scaling and the Extrapolation to ITER, Plasma Physics and Controlled Fusion to appear (EPS meeting, 1997) (1997).
J. W. Connor and J. B. Taylor, Nuclear Fusion 17, 1047 (1977).
M. Greenwald, J. Terry, S. Wolfe et al., A New Look at Density Limits in Tokamaks, Nuclear Fusion 28, 2199–2207 (1988).
A. Loarte and et al., Experimental Edge Results and Multi-machine Comparison, Contributions to Plasma Physics to appear (1998).
J. Snipes et al, Proceedings of the EPS Conference on Plasma Physics and Controlled Fusion, Berchesgarten, June, 1997.
F. Ryter and H-Mode Database Working Group, H-mode Power Threshold Database for ITER, Nuclear Fusion 36, 1217 (1996).
M. Kaufmann, J. Schweinzer, M. Albrecht et al., “Overview of ASDEX Upgrade Results,” presented at the 16th IAEA Fusion Energy Conference, Montreal, Canada, 1996 IAEA-CN-64/02-5.
A. Loarte, et al, “Experimental Edge Results and Multi-machine Comparison”, to appear in Contributions to Plasma Physics, 1998.
G. Janeschitz, A. Hubbard, Yu. Igitkhanov et al., “ITER operation space in terms of Te and ne at the plasma edge,” presented at the European Physical Society, Berchesgarten, Germany, 1997.
M. Mahdavi, R. Maingi, R. LaHaye et al., “Recent H-Mode Density Limit Experiments on DIII-D,” presented at the 1997 EPS Conference on Plasma Physics and Controlled Fusion, Berchesgarten, Germany, 1997.
V. Mertens, A. Herrmann, A. Kallenbach et al., “Edge and Divertor Physics in ASDEX Upgrade with emphasis on density limit characteristics,” presented at the Sixteenth IAEA Fusion Energy Conference, Montreal, Canada, 1996 IAEA-CN-64/A4-4.
R. Raman, F. Martin, B. Quirion et al., Experimental Demonstration of Nondisruptive, Central Fuelling of a Tokamak by Compact Toroid Injection, Physical Review Letters 73(23), 3101–3104 (1994).
S. Allen, D. Hill, T. Carlstrom et al., Measurements of Electron Temperature and Density with Divertor Thomson Scattering in Radiative Divertor Discharges on DIII-D, Journal of Nuclear Materials to appear (1996).
A. Kukushkin, H. D. Pacher, V. Abramov, et al., “Analysis of The Performance of The ITER Divertor And Analysis of The ITER Tokamak Edge Parameter Database,” presented at the Sixteenth IAEA Fusion Energy conference, Montreal, Canada, 7–11 October, 1996 IAEA-CN-64/FP-27.
A. Kukushkin, H. D. Pacher et al., 24th EPS Conference on Controlled Fusion and Plasma Physics, Berchtesgaden, Germany, 9-13 June, 1997. Paper P3.013.
R.S. Granetz, Nuclear Fusion 36, 545 (1996).
K. Ioki et al, “ITER Vessel and Blanket”, presented at the Sixteenth IAEA Fusion Energy conference, Montreal, Canada, 7–11 October, 1996 IAEA-CN-64/FP-7.
Thome, R., Barabaschi et al, “Recent Progress on ITER Magnet Systems, Proc. SOFE 1997.
M. Huguet., “ITER Magnets and Plasma Control”, presented at the Sixteenth IAEA Fusion Energy conference, Montreal, Canada, 7–11 October, 1996 IAEA-CN-64/FP-11.
C. Sporchia et al, “Mechanical Structrues for the ITER Magnet Systems”, Proc. 19th SOFT, Lisboa, 1996.
V. Khripunov and R. T. Santoro, Radionuclide production in the ITER coolant water, ITER Report, Garching Joint Work Site, G 30 RI l 96-07-10, 1996.
M. Roccella, Private communication.
Janeschitz, G. et al, Proc. 4th ISFNT, Tokyo, 1997.
J. Schlosser, J. Boscary, F. Escourbiac, et. al., Comparison between various thermal hydraulic tube concepts for the ITER divertor, 19th Symp. on Fusion Tech., Lisbon (1996).
Janeschitz, G. et al, “ITER Divertor, Pumping, and Fuelling System Designs, presented at the Sixteenth IAEA Fusion Energy conference, Montreal, Canada, 7–11 October, 1996 IAEA-CN-64/FP-2.
T. Burgess et al, Remote Maintenance of In-Vessel Components for ITER, Proc. Fourth International Symposium on Fusion Nuclear Technology, Tokyo, Japan, April 1997, to appear.
R. Haange et al, Radiation and Safety Aspects of Removal of Activated Components from the ITER Vacuum Vessel, Proc. Fourth International Symposium on Fusion Nuclear Technology, Tokyo, Japan, April 1997, to appear.
E. Martin et al, Design of the ITER Divertor Remote Handling System, Proc. 19th Symposium of Fusion Technology, Lisbon, Portugal, Oct. 1996, to appear.
D. Maisonnier et al, Status of Development of Remote Maintenance of ITER Divertor Cassettes, Proc. 16th IAEA Fusion Energy Conference, Montreal, Canada, Oct. 1996, to appear.
E. Tada et al, Development of Remote Maintenance Equipment for ITER Blankets, Proc. Fourth International Symposium on Fusion Nuclear Technology, Tokyo, Japan, April 1997, to appear.
P. Edmonds, et al., this conference.
B. de Kock, et al, this conference.
P. Barabaschi, Private communication.
G. Janeschitz, B. de Kock et al, this conference.
L. Johnson et al, this conference.
Author information
Authors and Affiliations
Consortia
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1998 Springer Science+Business Media New York
About this chapter
Cite this chapter
ITER Joint Central Team and Home Teams. et al. (1998). ITER Physics Basis, Machine Design and Diagnostic Integration. In: Stott, P.E., Gorini, G., Prandoni, P., Sindoni, E. (eds) Diagnostics for Experimental Thermonuclear Fusion Reactors 2. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-5353-3_1
Download citation
DOI: https://doi.org/10.1007/978-1-4615-5353-3_1
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-7442-8
Online ISBN: 978-1-4615-5353-3
eBook Packages: Springer Book Archive