Abstract
A thin veneer of clastic and carbonate sediments 460–1,375 m (1,500–4,500 ft) thick overlies a Precambrian crystalline basement complex in southeastern Kansas (Midcontinent, USA). Well-log temperatures were analyzed and related to modeled temperatures for different-size areas in a relatively simple structural setting of the shallow, cratonic Cherokee Basin. A statistical analysis of bottom-hole temperatures (BHTs) confirmed that (1) there is no significant change of temperature with season or through the 40 years of drilling and logging the wells in the area; and (2) the distribution of values is normal indicating they were recorded correctly on the rig within the instrumental precision of about 1 K. It was obvious from the large data set of nonequilibrium BHTs analyzed by depth and stratigraphic unit that they differed from drillstem test temperatures (DSTs) and modeled temperature- depth distributions based on heat conduction. At shallow depth (less than 500 m), BHT values as read from the logs are higher than ‘true’ formation temperature; in a depth range of 500–700 m, values scatter around a ‘true’ formation temperature; and at greater depths (up to 1,100 m), the uncorrected BHTs slightly underestimate the formation temperature. Different amounts of data scatter in the composite BHT-depth plots occur in different size areas, which also impacts the calculated geothermal gradients and empirical correction methods developed on the basis of these data. Although the BHTs in the 60×75 km area of Elk and Chautauqua counties scatter ±5–9°C around some mean value, seemingly the scatter can be reduced slightly when working with smaller areas, for example 10×10 km. A mapping approach made to investigate the variability of the 60×75-km BHT cluster in more detail showed part of the BHT scatter to be related to regional geology. Temperature residuals of the trend are on the order of ±2.5°C with some values as large as ±7.5°C. This provides an indication of variability of BHTs resulting from other influences, which might be different perturbations as a result of drilling practices and different shut-in times of the wells. In addition, some of the temperature highs are shown to be related to local, subtle anticlines developed in the sedimentary cover over faulted basement blocks and therefore contain signal. The separation of different effects on BHTs has implications on the reliability of geothermal gradient and heat-flow density estimations.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
American Association of Petroleum Geologists and U.S. Geological Survey 1976a, Subsurface temperature map of North America: U.S. Geol. Survey Map, 1:5,000,000.
American Association of Petroleum Geologists and U.S. Geological Survey, 1976b, Geothermal gradient map of North America: U.S. Geol. Survey Map, 1:5,000,000.
Adler, F.J., and others, 1971, Future petroleum provinces of the Mid-Continent, in Cram, I.H., ed., Future Petroleum Provinces of the United States-Their Geology and Potential: Am. Assoc. Petroleum Geologists Mem. 15, v. 2, p. 985–1042.
Bachu, S., 1985, Influence of lithology and fluid flow on the temperature distribution in a sedimentary basin: a case study from the Cold Lake area, Alberta, Canada: Tectonophysics, v. 120, no. 3-4, p. 257–284.
Ben Dhia, H., 1988, Tunisian geothermal data from oil wells: Geophysics, v. 53, no. 11, p. 1479–1487.
Blackwell, D.D., and Steele, J.L., 1989, Heat flow and geothermal potential of Kansas: Kansas Geol. Survey Bull. 226, p. 267–291.
Bodner, D.P., and Sharp, Jr., J.M., 1988, Temperature variations in South Texas subsurface: Am. Assoc. Petroleum Geologists Bull., v. 72, no. 1, p. 21–32.
Bullard, E.C., 1947, The time necessary for a borehole to attain temperature equilibrium: Royal Astronomical Monthly Notices, Geophys. Suppl., v. 5, no. 5, p. 127–130.
Chapman, D.S., Keho, T.H., Bauer, M.S., and Picard, M.D., 1984, Heat flow in the Uinta Basin determined from bottom-hole temperature (BHT) data: Geophysics, v. 49, no. 4, p. 453–466.
Deming, D., 1989, Application of bottom-hole temperature corrections in geothermal studies: Geothermics, v. 18, no. 5-6, p. 775–786.
Deming, D., and Chapman, D.S., 1988, Inversion of bottom-hole temperature data: the Pineview field Utah-Wyoming thrust belt: Geophysics, v. 53, no. 3, p. 707–720.
Deming, D., Nunn, J.A., Jones, S., and Chapman, D.S., 1990, Some problems in thermal history studies, in Nuccio, V.F., and Barker, C.E., eds., Applications of Thermal Maturity Studies to Energy Exploration: SEPM, Rocky Mountain Section, p. 61–80.
Drury, M.J., Jessop, A.M., and Lewis, T.J., 1984, The detection of groundwater flow by precise temperature measurments in boreholes: Geothermics, v. 13, no. 3, p. 163–174.
Förster, A., and Merriam, D.F., 1993, Geothermal field interpretation in south-central Kansas for parts of the Nemaha Anticline and flanking Cherokee and Sedgwick Basins: Basin Research, v. 5, no. 4, p. 213–234.
Förster, A., and Merriam, D.F., 1995, A bottom-hole temperature analysis in the American Midcontinent (Kansas): implications to the applicability of BHTs in geothermal studies: Intern. Geothermal Assoc., World Geothermal Congress (Florence, Italy), Proc, v. 2, p. 777–782.
Förster, A., Merriam, D.F., and Brower, J.C., 1993, Relationship of geological and geothermal field properties: Midcontinent area, USA, an example: Math. Geology, v. 25, no. 7, p. 937–947.
Förster, A., Merriam, D.F., and Davis, J.C., 1996, Statistical analysis of some bottom-hole temperature (BHT) correction factors for the Cherokee Basin, southeastern Kansas: Tulsa Geol. Society Trans., AAPG Mid-Continent Section Meeting, p. 3–9.
Förster, A., Merriam, D.F., and Davis, J.C., 1997, Spatial analysis of temperature (BHT/DST) data and consequences for heat-flow determination in sedimentary basins: Geol. Rundschau, v. 86, no. 2, p. 252–261.
Förster, A., Schrötter, J., Merriam, D.F., and Blackwell, D.D., 1997, Application of optical-fibre temperature logging, an example in a sedimentary environment: Geophysics, v. 62, no. 4, p. 1107–1113.
Hermanrud, C., Cao, S., and Lerche, I., 1990, Estimates of virgin rock temperature derived from BHT measurements: bias and error: Geophysics, v. 55, no. 7, p. 924–931.
Jessop, A.M., 1990, Comparison of industrial and high-resolution thermal data in a sedimentary basin: Pageoph., v. 133, no. 2, p. 251–267.
Jorgensen, D.G., 1989, Paleohydrology of the Anadarko Basin, central United States, in Johnson, K.S., editor, Anadarko Basin Symposium, 1988: Oklahoma Geol. Survey Circ. 90, p. 176–193.
Kehle, R.O., 1972, Geothermal survey of North America: Am. Assoc. Petroleum Geologists, 1971 Annual Progress Report, 31 p.
Kehle, R.O., 1973, Geothermal survey of North America: Am. Assoc. Petroleum Geologists, 1972 Annual Progress Report, 28 p.
Lam, H.L., and Jones, F.W., 1984, Geothermal gradients of Alberta in western Canada: Geothermics}, v. 13, no. 3, p. 181–192.
Lucazeau, F., and Ben Dhia, H., 1989, Preliminary heat-flow density data from Tunisia and the Pelagian Sea: Can. Jour. Earth Science, v. 26, no. 5, p. 993–1000.
Macfarlane, P.A., and Hathaway, L.R., 1987, The hydrogeology and chemical quality of groundwaters from the Lower Paleozoic aquifers in the Tri-State region of Kansas, Missouri, and Oklahoma: Kansas Geol. Survey Ground-Water Ser. 9, 37 p.
Majorowicz, J.A., and Jessop, A.M., 1981a, Regional heat flow patterns in the Western Canadian Sedimentary Basin: Tectonophysics, v. 74, no. 3-4, p. 209–238.
Majorowicz, J.A., and Jessop, A.M., 1981b, Present heat flow and a preliminary paleogeothermal history of the Central Prairies Basin, Canada: Geothermics, v. 10, no. 2, p. 81–93.
Majorowicz, J.A., Jones, F.W., Lam, H.L., and Jessop, A.M., 1984, The variability of heat flow both regional and with depth in southern Alberta, Canada: effect of groundwater flow?: Tectonophysics, v. 106, no. 1-2, p. 1–29.
Majorowicz, J.A., Jones, F.W., Lam, H.L., and Jessop, A.M., 1985, Terrestrial heat flow and geothermal gradients in relation to hydrodynamics in the Alberta Basin, Canada: Jour. Geodynamics, v. 4, no. 1-4, p. 265–283.
McPherson, B.J.O.L., and Chapman, D.S., 1996, Thermal analysis of the southern Powder River Basin, Wyoming: Geophysics, v. 61, no. 6, p. 1689–1701.
Merriam, D. F., 1963, The geologic history of Kansas: Kansas Geol. Survey Bull. 162, 317 p.
Merriam, D.F., and Förster, A., 1994, Precambrian basement control on ‘plains-type folds’ in the Midcontinent region, USA (abst.), in Oncken, O., and others, eds, 11th Intern. Conf. on Basement Tectonics’ 94: Intern. Basement Tectonics Assoc. (Potsdam, Germany), p. 101–102.
Merriam, D.F., and Förster, A., 1996, Precambrian basement control on ‘plains-type folds’ (compactional features) in the Midcontinent region, USA, in Oncken, O., and Janssen, C., eds., Basement Tectonics 11: Kluwer Acad. Publ., Dordrecht, p. 149–166.
Musgrove, M., and Banner, J.L., 1993, Regional ground-water mixing and the origin of saline fluids: Midcontinent, United States: Science, v. 259, no. 5103, p. 1877–1882.
Speece, M.A., Bowen, T.D., Folcik, J.L., and Pollack, H.N., 1985, Analysis of temperatures in sedimentary basin: the Michigan Basin: Geophysics, v. 50, no. 8, p. 1318–1334.
Stavnes, S.A., 1982, A preliminary study of the surface temperature distribution in Kansas and its relationship to the geology: unpubl. masters thesis, Univ. Kansas, 311 p.
Vik, E., and Hermanrud, C., 1993, Transient thermal effects of rapid subsidence in the Haltenbanken area, in Doré, A.G. and others, eds., Basin Modelling: Advances and Applications: Norwegian Petroleum Society (NPF), Spec. Publ. 3, p. 107–117.
Willet, S.D., 1990, Stochastic inversion of thermal data in a sedimentary basin: resolving spatial variability: Geophys. Jour. Intern., v. 103, no. 2, p. 321–339.
Willet, S.D., and Chapman, D.S., 1986, On the use of thermal data to resolve and delineate hydrologic flow systems in sedimentary basins-an example from the Uinta Basin, Utah, in Hitchon, B., Bachu, S., and Sauveplane, CM., eds., Hydrology of Sedimentary Basins-Applications to Exploration and Exploitation: Proc. Third Ann. Canadian/American Conference on Hydrogeology, National Water Well Assoc., Dublin, OH, p. 159–168.
Willet, S.D., and Chapman, D.D., 1987, Analysis of temperatures and thermal processes in the Uinta Basin, in Beaumont, C., and Tankard, A. J., eds., Sedimentary Basins and Basin-forming Mechanisms: Can. Soc. Petroleum Geologists Mem. 12, p. 447–461.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer Science+Business Media New York
About this chapter
Cite this chapter
Förster, A., Merriam, D.F. (1999). Problems and Potential of Industrial Temperature Data from a Cratonic Basin Environment. In: Förster, A., Merriam, D.F. (eds) Geothermics in Basin Analysis. Computer Applications in the Earth Sciences. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-4751-8_2
Download citation
DOI: https://doi.org/10.1007/978-1-4615-4751-8_2
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-7154-0
Online ISBN: 978-1-4615-4751-8
eBook Packages: Springer Book Archive