Abstract
The bridging element between the transmitter and receiver is generally known as transmission channel. Any improvement in this transmission channel aims at either to improve the transmission fidelity or to increase the data rate or to increase the transmission distance between the two stations. Also, the amount of information transmitted is directly related to the frequency range over which the carrier wave operates, increasing the carrier frequency increases the available transmission band width and consequently provides larger information carrying capacity. Therefore, great interest in communication at optical frequencies (~ 5 × 1014 Hz) was created with the advent of lasers in 1966 and hence the birth of optical fibers (working on the principle of total internal reflection). The first silica optical fiber showed the losses in the transmission signal over 1000dB/km. The attenuation in the signals is caused by absorption, scattering, radiative, distortions, pulse broadening, mode couplings etc1. However, the attractive advantages, (low weight, wider band width, hair size dimensions, immunity to the electric interference, low fiber to fiber cross talks, high degree of data security, etc), over the conventional modes of transmission led researchers to reduce the attenuation in glass fiber around 0.2 dB/km in the 1100 to 1600 nra by early 1980.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Gerd Keiser, “Optical Fibre Communication,” McGraw-Hill Book Co., Singapore, 1984.
C.T.Troy, “New Spectra, Plastic FO market said set to soar,” Photonics spectra, 24 (7): 38 (1990)
P. Avakian, N.Y. Hsu, P. Meakin and H.L. Synder, “Optical absorption of predeuterated PMMA and influence of Water, ” J. Polym. Soi. Polym. Phys. Ed., 22: 1607 (1984).
T. Kaino, “Ultimate loss limits in plastic optical fibers”, Appl. Opt. 24: 4192 (1985).
F.L. Sanford, “Polycarbonate: The next optical fiber,” Photonics Spectra, 23 (10): 83 (1989).
S.E. Miller, E.A. Marcatili and T. Li, “Research towards optical fiber transmission system,” Proc. IEEE, 61: 1703 (1973).
H. Kressel and J.K. Butler, “Semiconductors Lasers and Heterojunction LED’s,” Academic, New York, 1977.
G.H.B. Thompson, “Physics of Semiconductor Laser Devices,” Wiley, New York, 1980.
T. Kaino, “Preparation of plastic optical fibers for near IR region transmission, ”J. Poly. Sci, Part A, Polym. Chem., 25: 37 (1987).
O. Masaya and S. Koji, “Heat-resistant optical fibers from polycarbonates,” Jpn. Kokai Tokkyo Koho JP 0119, 307 (1989).
F. Hiroshi and K.Toshimasa. Hiroshi and K.Toshimasa, “Clad optical fibers with polycarbonate cores,” Jpn. Kokai Tokkyo Koho JP 0161, 706 (1989).
T. Akira, S. Hisashi, T.Takehisa and W. Noboru, “New plastic optical fiber with polycarbonate core and fluorescence doped fibers for high temperature use,” Proc SPIE-Int. Soc. Opt. Eng. 840: 19 (1987).
M. Shiruyoshi, D.S.Katsuhikoi and U. Yosihiro, “Silicone acrylate polymers for optical fibers clads,” Jpn. Kokai Tokkyo Koho JP 63,243, 110 (1988).
T. Shinichi, K. Shigeki, M. Kazuhiko, Y. Taku and K. Toshio, “Heat resistant cladding material for plastic optical fiber and plastic optical fiber using the same,” Eur. Pat. Appl. EP 307, 164 (1989).
N. Takashi and S. Kazuyoshi, “Heat resistant polycarbonate optical fibers,” Jpn. Kokai Tokkyo Koho JP 6402, 006 (1989).
Theodore L. Parker and Donald J. Parettie, “Vinyl aromatic core polymeric clad optical fiber,” PCT. Int Appl. WO 8705, 117 (1987).
U. Naoya, “Aromatic polyester cores for optical fibers”, Jpn. Kokai Tokkyo Koho JP 0129, 805 (1989).
N. Tsuneyuki, T. Yoshiharu, M. Setsuo and I. Hitoshi, “Manufacture of core sheath optical fibers,” Jpn. Kokai Tokkyo Koho JP 01,13, 102 (1989).
Liu. Hanming and Wong. Zhiyuan, “Preparation of R1 and R2 optical fibers,” Shiyou-Huayong, 17 (11): 714 (1988).
A. Fumito, F. Hiroshi and H.Hisako, “Flexible diethylene glycol bis (allyl carbonate) copolymer optical fiber, ”Jpn. Kokai Tokkyo Koho JP 63, 146, 004 (1988).
T. Seishiro and S.Heiroku. Seishiro and S.Heiroku, “Optical fibers having methyl methacrylate styrene copolymer cores with low transmission loss,” Jpn. Kokai Tokkyo Koho JP 63,101, 803 (1988).
T. Kaino and Y. Katayuma, “Polymers For Opto-electronics,” Polym. Eng. Sci., 29 (17): 1809 (1989).
T. Kaino, T. Fukuda and T. Matsunaga, “Optical fibers”, Jpn. Kokai Tokkyo Koho JP 61,223,805 and 61,223, 806 (1986).
T.Masayuki, M. Tsuneaki, Y. Shotaro and H. Shoici, “Manufacture of acrylate polymer optical fibers,” Jpn. Kokai Tokkyo Koho JP 63,214, 705 (1988).
T. Masayuki, M. Tsuneaki, Y. Shotaro and H. Schoici, “Manufacture of fluorostyrene-methacrylate copolymer optical fibers,” Jpn. Kokai Tokkyo Koho JP 63, 214, 704 (1988).
T. Masayuki, M. Tsuneaki, Y. Shotaro and H. Schoici, “Optical fibers with deuterated fluoropolymer cores,” Jpn. Kokai Tokkyo Koho JP 63,182, 607 (1988).
T. Masayuki, “Optical fibers with deuterated fluoropolymer cores,” Jpn. Kokai Tokkyo Koho JP 63,182, 608 (1988).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1991 Springer Science+Business Media New York
About this chapter
Cite this chapter
Nigam, J.K., Malik, A., Bhalla, G.L. (1991). Emerging Developments in Plastic Optical Fibers. In: Prasad, P.N., Nigam, J.K. (eds) Frontiers of Polymer Research. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-3856-1_21
Download citation
DOI: https://doi.org/10.1007/978-1-4615-3856-1_21
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-6721-5
Online ISBN: 978-1-4615-3856-1
eBook Packages: Springer Book Archive