Abstract
Individual material characteristics of the composite constituents are important factors and these strongly influence the success of composite manufacturing as well as composite properties. Hence, prior to composite design and manufacturing, these aspects should be understood well and defined clearly. This chapter looks into the crucial mechanical and thermal material characteristics of a composite and emphasizes composite constituents. Conclusively, it states briefly the current candidate matrix, fiber and interface materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Antti, M.-L., 1999. Preparation and Properties of Sapphire/Alumina Long Fibre Composites. PhD-Thesis, Depart. of Mater. and Manuf. Eng. Luleå University of Technology, Sweden, ISSN: 1402–1757.
Braue, W., Borath, R., Flucht, F., Goering, J. and Schneider, H., 2001. Failure Analysis of NextelTM 720 Fibers Subjected to High-Temperature Testing: The Role of Intrinsic Fiber Impurities. in “High-Temperature Ceramic Matrix Composites”. eds. W. Krenkel. R. Naslain, H. Schneider. Wiley VCH, Germany, 90–95.
Bunsell, A. R. and Berger, M.-H., 1999. Fine Ceramic Fibers. Marcel Dekker Inc., New York., USA.
Ceramic Fiber and Coatings, 1998, in Advanced materials for the twenty-first Century. National Materials Advisory Board. Publication NMAB-494. National Academy Press, Washington DC, USA
Cinibulk, M.K., 1994, Magnetoplumbite Compounds as a Fiber Coating in Oxide/Oxide Composites, Ceram. Eng. Sci. Proc., 5(5) 721–28.
Cinibulk, M. K., Keller, K. A., Mah, T.-I. and Parthasarathy, T. A., 2001. Nextel 610 and 650 fiber reinforced porous alumna-YAG matrix composites, in Ceram. Eng. Sci. Proc., 22(3). 677–685.
Chawla, K.K., 1993, Ceramic Matrix Composites. Chapman and Hall, London.
Chawla, K. K., 1998. Composite Materials: Science and Engineering. 2nd Edn, Springer, New York, USA.
Chawla, K. K., 2000, Interface engineering in oxide fiber/oxide matrix composites, Int. Mat. Rew., Vol.: 45(5) 165–189.
Chawla, K. K., Schneider, H., Schmücker, M. and Xu, Z. R., 1997, Oxide fiber/oxide matrix composites in “Processing and design issues in high temperature materials”. ed. by N.S. Stoloff, R.H. Jones (Hrsg.), TMS, Warrendale, PA, 235–245.
Davis, J. B., Löfvander, J. P. A., Evans, A. G., Bishoff, E. and Emilliani, M. L., 1996. Fiber Coating Concepts for Brittle Matrix Composites, J. Am. Ceram. Soc., 76, 1249–1257.
Deléglise, F., Berger, M. H., Jeulin, D. and Bunsel, A R., 2001, Microstructural stability and Room Temperature Mechanical Properties of the Nextel 720 Fiber, J. Europ. Ceram. Soc., 21, 569–580.
Doleman, P.A. and Butler, E.G., 1997, The growth of alumina/YAG eutectic fibers by the laser-heated floating zone process. in “Key Engineering Materials”, Vols.: 127–131. pp. 193–202. Trans Tech Publications, Switzerland.
Evans, A.G. and Marshall, D. B., 1989, Acta Metall., The Mechan ical Behavior of Ceramic Matrix Composites, 37, 2567–83.
Evans, A.G., Zok, F. W., McMeeking, R.M. and Du, Z.Z., 1996. Models of high-temperature, environmentally assisted embrittlement in ceramic-matrix composites, J. Am. Ceram. Soc., 79(9) 2345–52.
Frost, H. J. and Ashby, M. F., 1982, Deformation-Mechanism Maps — The Plasticity and Creep of Metals and Ceramics, Pergamon, Oxford, UK.
Gladysz, G. M. and Chawla, K. K., 1997, On Choosing Interphase Materials for Alumina-Based Composites, Scr. Mater., 37, 1393–1398.
Goering, J., Kanka, B., Steinhauser, U. and Schneider et al., 2000, Thermal barrier coated NextelTM720-fiber/mullite-matrix composites: Their potential for long term high temperature use in gas turbines, Ceram. Eng. Sci. Proc., 24, 613–617.
Gupta, V., Yuan, J. and Martinez, D., 1993, Calculation, Measurement and Control of Interface Strength in Composites, J. Am. Ceram. Soc., 76(2) 305–15.
Ha, J.-S. and Chawla, K. K., 1993, Effect of SiC/BN Double Coating on Fiber Pullout in Mullite Fiber/Mullite Matrix Composites, J. Mater. Sci. Lett. 12, 84–86.
Hay, R. S., 1993, Ceram. Eng. Sci. Proc., 14, 922–930.
He, M.-Y and Hutchinson, J. W., 1989, Crack Deflection at an Interface Between Dissimilar Materials, Int. J. Solids Struct., 25, 1053–1067.
Herbell, T. P., Hull, D. R. and Garg, A., 1998, Hot Hydrogen Exposure Degradation of the Strength of Mullite, J. Am. Ceram. Soc., 81(4) 910–16.
Holmquit, M., Lundberg, R., Sudre, O., Razzell, A. G., Molliex, L., Benoit, J. and Adlerborn, J., 2000, Alumina/Alumina Composite with a Porous Zirconia Interphase — Processing, Properties and Component Testing, J. Euro. Ceram. Soc., 20(5) 599–606.
Lewis, M. H., Cain, M. G., Doleman, P., Razzell, A. G. and Gent, J., 1995, Development of interfaces in oxide and silicate matrix composites, in “High-temperature ceramic-matrix composites II”, (ed. by A. G. Evans and R. Naslain, 41–52, American Ceramic Society, Westerwille, OH, USA.
Lundberg, R., Pejryd, L., Butler, E., Ekelund, M. and Nygren, M., 1993, Proc. Int. Conf. HTCMC-1, ed. by R. Naslain, et al., 1151–1158, Woodhead Publ., Cambridge, UK.
Marshall, D.B. and Evans, A.G., 1985, Failure mechanisms in ceramic-fiber/ceramic-matrix composites, J. Am. Ceram. Soc., 68, 225–231.
Milz, C., 2000, Mechanische und Mikrostrukturelle Charakterisierung einer aluminosilikatischen Faser für den Hochtemperatureinsatz in Verbundwerkstoffen, Shaker Verlag, Aachen, Germany (PhD Thesis)
Morgan, P. E. and Marshall, 1992, D. B., US Pat. 5137852, US Patent Office, Washington, DC.
Morgan, P.E.D., Marshall, D.B. and Housley, R.M., 1995, High Temperature Stability of Monazite-Alumina Composites, Mater. Sci. Eng., A, A195, 215–22.
Morrell, R., 1985, An introduction for the engineer and designer, in “Handbook of properties of technical & engineering ceramics, Part I”, National Physical Laboratory, Her Majesty’s Stationary Office, London.
Naslain, R., 1999, Fibers from solid precursor phases in: Advanced Inorganic Fibers: Processes Structures, Properties, Applications, ed. by F. T. Wallenberger, Kluwer Academic Publ., Dordrecht/Boston/London.
Okada, K., Motohashi, T., Kameshima, Y. and Yasumori, A., 2000, Sol-gel synthesis of YAG/Al2O3 long fibers from water solvent systems, J. Euro. Ceram. Soc., 20(5), 561–567.
Patankar, S. N., Venkatesh, R. and Chawla, K. K., 1991, Effect of Tin Dioxide Coating on Tensile Strength of Alumina Fibers, Scr. Metall., 25, 361–366.
Petry, M.D. and Mah, T-I, 1999, Effect of thermal exposures on the strengths of NextelTM 550 and 720 filaments, J. Am. Ceram. Soc., 82(19) 2801–807.
Saruhan, B., Bartsch, M., Schmücker, M., Schneider, H., Nubian, K., Wahl, G., 2001, Effect of Interphase Characteristics on Long-Term Durability of Oxide-Based Fiber-Reinforced Composites, in “Processing of fibers and composites”, Composites-Part A Applied Science and Manufacturing, ed. by K.K. Chawla, A. Mortensen, J.-A. E. Månson, Vol.: 32A, 1095–1104.
Sayir, A., Greer III, L.C., Goldsby, J. C. and Oberle, L.G., 1994, Laser speckle micro-strain measurements on small diameter fibers, Ceram. Eng. Sci. Proc., 18, 397–410.
Sayir, H., Sayir, A. and Lagerlof, K.P., 1993, Temperature dependent brittle fracture of undoped and impurity doped sapphire fibers, Ceram. Eng. Sci. Proc., 14(7–8) 581.
Schmücker, M. Schneider, H., Chawla, K.K., Xu, Z.R. and Ha, J-S, 1997, Thermal degradation of fiber coatings in mullite fiber reinforced mullite composites, J. Am. Ceram. Soc., 80, 2136–41.
Schmücker, M., Flucht, F. and Schneider, H., 1996, High temperature behavior of polycrystalline aluminosilicate fibers with mullite bulk composition, J. Euro. Ceram. Soc., 16, 281–85.
Schmücker, M., Flucht, F. and Schneider, H., 2001, Temperature Stability of 3M NextelTM610, 650 and 720 Fibers-A Microstructural Study. in “High-Temperature Ceramic Matrix Composites”, eds. W. Krenkel. R. Naslain, H. Schneider, Wiley VCH, 73–78.
Schneider, H., Okada, K. Pask, J. A., 1994. Mullite and mullite ceramics, John Wiley & Sons, Chichester, UK.
Rau, M., McCullough, C., Sorenson, J. P., Tompkins, T. L. Wilson, D. M., 2001, 3M(TM) NextelTM ceramic fibers for metal matrix, ceramic matrix and polymer matrix composites, presented at the conference “Verbundwerkstoffe und Werkstoffverbunde” in Chemnitz, Germany, 5.–7. Sept. 2001.
Wallenberger, F.T., 1999, Advanced Inorganic Fibers: Processes Structures, Properties, Applications, Kluwer Academic Publ., Dordrecht, Boston, London.
Wilson, D. M., Lueneburg, D.C. and Leider, S.L., 1993. High temperature properties of NextelTM610 and alumina-based nanocomposite fibers, Ceram. Eng. Sci. Proc. 14(7–8), 609–621.
Wilson D. M., 1997, Statistical Tensile Strength of NextelTM610 and NextelTM720 Fibers, J. Mater. Sci., 32, 2535–42.
Wilson, D. M. and Visser, L. R., 2000, NextelTM650 Ceramic Oxide Fibers: New Alumina-Based Fiber for High Temperature Composite Reinforcement, Ceram. Eng. Sci. Proc., 21(4), 363–373.
Xu, Z.R and Chawla, K. K., 1993, Effect of SiC/BN double coating on fiber pullout in mullite fiber/mullite matrix composites, J. Mater. Sci. Lett., 12, 84–86.
Yang, J-M., Jeng, S.M. and Chang, S., 1996, Fracture behavior of directionally solidified Y3Al5O12/Al2O3 eutectic fiber. J. Am. Ceram. Soc., 79(5) 1218–22.
Yang. J-M., 2001. Single crystal oxide and oxide/oxide eutectic fibers for high temperature composites. in “Int. Journal of Materials & Product Technology”, ed. by S. Ochiai, Y. Kagawa and T. Kobayashi. Vol.: 16. Nos. 1–3. pp. 12–21.
Yosikawa, A., Epelbaum, B. M., Hasegawa. K., Durbin. S. D. and Fukuta, T., 1999. Microstructure in oxide eutectic fibers grown by a modified micro-pulling-down method, J. of Crystal Growth, 205[3], 305.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer Science+Business Media New York
About this chapter
Cite this chapter
Saruhan, B. (2003). 2 Characteristics of Oxide-Based Fiber-Reinforced Composites. In: Oxide-Based Fiber-Reinforced Ceramic-Matrix Composites. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-0319-4_2
Download citation
DOI: https://doi.org/10.1007/978-1-4615-0319-4_2
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-7349-6
Online ISBN: 978-1-4615-0319-4
eBook Packages: Springer Book Archive