Abstract
High reliability and durability are two of the important requirements for a commercially used semiconductor laser. There are multiple causes for the semiconductor laser to fail during operation. Therefore, it is important to analyze and identify the root causes for laser failures and provide effective solutions to improve the reliability and durability of the semiconductor laser. In this chapter, different failure modes of semiconductor lasers are introduced. By analyzing these failure modes, some approaches to improve reliability of the semiconductor laser are demonstrated. The lifetime prediction of the semiconductor lasers is also presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
B. Hao, D. Hou, T. Song, X. Yin, X.S. Liu, Reliability Analysis of the High Power Semiconductor Laser in Application (Internal Talk from Focuslight Technologies Co., Ltd., 2012), pp. 1–15
H. Kissel, G. Seibold, J. Biesenbach, G. Groenninger, G. Herrmann, U. Strauss, A comprehensive reliability study of high-power 808 nm laser diodes mounted with AuSn and indium. Proc. SPIE 6876, 687618(1–10) (2008)
X.S. Liu, M.H. Hu, C.G. Caneau, R. Bhat, L.C. Hughes, C.E. Zah, in Thermal Management Strategies for High Power Semiconductor Pump Lasers. IEEE 2004 Inter Society Conference on Thermal Phenomena, vol. 2 (2004), pp. 493–500
Y.B. Qiao, S.W. Feng, C. Xiong, X.Y. Ma, H. Zhu, C.S. Guo, G.H. Wei, Spatial hole burning degradation of AlGaAs/GaAs laser diodes. Appl. Phys. Lett. 99(10), 103506(1–3) (2011)
A. Hodges, J. Wang, M. DeFranza, X.S. Liu, B. Vivian, C. Johnson, P. Crump, P. Leisher, M. DeVito, R. Martinsen, J. Bell, A CTE matched, hard solder, passively cooled laser diode package combined with nXLT™ facet passivation enables high power, high reliability operation. Proc. SPIE 6552, 65521E(1–9) (2007)
X.S. Liu, R.W. Davis, L.C. Hughes, M.H. Rasmussen, R. Bhat, C.E. Zah, J. Stradling, A study on the reliability of indium solder die bonding of high power semiconductor lasers. J. Appl. Phys. 100(1), 013104(1–11) (2006).
D. Schleuning, M. Griffin, P. James, J. McNulty, D. Mendoza, J. Morales, D. Nabors, M. Peters, H. Zhou, M. Reed, Robust hard-solder packaging of conduction cooled laser diode bars. Proc. SPIE 6456, 645604(1–11) (2007).
M. Leers, K. Boucke, C. Scholz, T. Westphalen, Next generation of cooling approaches for diode laser bars. Proc. SPIE 6456, 64561A(1–10) (2007)
X.S. Liu, K. Song, R.W. Davis, M.H. Hu, C.E. Zah, in Design and Implementation of Metallization Structures for Epi-down Bonded High Power Semiconductor Lasers. IEEE 2004 Electronic Components and Technology Conference, vol. 1 (2004), pp. 798–806
M.K. Davis, A. Kussmaul, G.W. Yang, M.H. Hu, X.S. Liu, Y.Q. Zhu, D.A.S. Loeber, C.E. Zah, Impact of near-end residual reflectivity on the spectral performance of high-power pump lasers. IEEE J. Quantum Electron. 40(4), 354–363 (2004)
M.T. Sheen, C.M. Chang, H.C. Teng, J.H. Kuang, K.C. Hsieh, W.H. Cheng, The influence of thermal aging on joint strength and fracture surface of Pb/Sn and Au/Sn solders in laser diode packages. J. Electron. Mater. 31(8), 895–902 (2002)
E. Zakel, H. Reichl, Au-Sn bonding metallurgy of TAB contacts and its influence on the Kirk end all effect in the ternary Cu-Au-Sn. IEEE Trans. Compon. Hybrids Manuf. Technol. 16(3), 323–332 (1993)
X.N. Li, Y.X. Zhang, J.W. Wang, L.L. Xiong, P. Zhang, Z.Q. Nie, Z.F. Wang, H. Liu, X.S. Liu, Influence of package structure on the performance of the single emitter diode laser. IEEE Trans. Compon. Packag. Manuf. Technol. 2(10), 1592–1599 (2012)
J. Marsh, Quantum well intermixing revolutionizes high power laser diodes: monolithically integrated systems drive applications. Laser Technik J. 4(5), 32–35 (2007)
S.P. Najda, G. Bacchin, B. Qiu, X. Liu, O.P. Kowalski, M. Silver, S.D. McDougall, C.J. Hamilton, J.H. Marsh, Benefits of quantum well intermixing in high power diode lasers. Proc. SPIE 5365, 1–13 (2004)
R. Feeler, S. Colemanb, J. Levya, E. Stephensa, Elimination of deionized cooling water requirement for microchannel-cooled laser diode arrays. Proc. SPIE 6456, 645617(1–8) (2007)
http://www.nadya-anscombe.com/downloadlibrary/EOOct1122-26.pdf
J.W. Wang, Z.B. Yuan, L.J. Kang, K. Yang, Y.X. Zhang, X.S. Liu, in Study of the Mechanism of “Smile” in High Power Diode Laser Arrays and Strategies in Improving Near-field Linearity. IEEE 2009 Electronic Components and Technology Conference (2009), pp. 837–842.
V. Wong, V. Rossin, J. Skidmore, P. Yalamanchili, X.D. Qiu, R. Duesterberg, P. Doussiere, D. Venables, R. Raju, J. Guo, M. Au, L. Zavala, M. Peters, G.W. Yang, Y.Z. Dai, E. Zucker, Recent progress in fiber-coupled multi-mode pump module and broad area laser-diode performance from 800–1500 nm. Proc. SPIE 7198, 71980S(1–8) (2009)
Sony Semiconductor Quality and Reliability Handbook (Sony Corporation, October 2000), pp. 232–236
V. Rossin, M. Peters, E. Zucker, B. Acklin, Highly reliable high-power broad area laser diodes. Proc. SPIE 6104, 610407(1–10) (2006)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media New York
About this chapter
Cite this chapter
Liu, X., Zhao, W., Xiong, L., Liu, H. (2015). Failure Analysis and Reliability Assessment in High Power Semiconductor Laser Packaging. In: Packaging of High Power Semiconductor Lasers. Micro- and Opto-Electronic Materials, Structures, and Systems. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-9263-4_9
Download citation
DOI: https://doi.org/10.1007/978-1-4614-9263-4_9
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-9262-7
Online ISBN: 978-1-4614-9263-4
eBook Packages: EnergyEnergy (R0)