Abstract
Hot melt extrusion has been utilized in the plastic, food, and metal industries for over eight decades. Pharmaceutical applications using this technology began in the 1970s and gained significant traction within the last 20 years. Melt extrusion has been considered by many to provide a platform for drug delivery, which has sustained and increased its interest by pharma. Future Trends provides a synopsis of melt extrusion’s achievements, its continued relevance by the pharmaceutical industry evidenced by patents approved, as well as its potential to change the paradigm for continuous manufacturing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bialleck S, Rein H (2011). Preparation of starch-based pellets by hot-melt extrusion. Eur J Pharm Biopharm 79(2):440–448
Breitenbach J (2002) Melt extrusion: from process to drug delivery technology. Eur J Pharm Biopharm 54(2):107–17
Bruce C, Fegely KA et al (2007) Crystal growth formation in melt extrudates. Int J Pharm 341(1–2):162–72
Crowley MM, Zhang F et al (2002) Stability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion. BioMaterials 23(21):4241–8
Crowley MM, Zhang F et al (2007) Pharmaceutical applications of hot-melt extrusion: part I. Drug Dev Ind Pharm 33(9):909–26
Ghalanbor Z, Korber M et al (2010) Improved lysozyme stability and release properties of poly(lactide-co-glycolide) implants prepared by hot-melt extrusion. Pharm Res 27(2):371–9
Gryczke A, Schminke S et al (2011). Development and evaluation of orally disintegrating tablets (ODTs) containing Ibuprofen granules prepared by hot melt extrusion. Colloids Surf B Biointerfaces 86(2):275–284.
Liu J, Zhang F et al (2001) Properties of lipophilic matrix tablets containing phenylpropanolamine hydrochloride prepared by hot-melt extrusion. Eur J Pharm Biopharm 52(2):181–90
Mididoddi PK, Prodduturi S et al (2006) Influence of tartaric acid on the bioadhesion and mechanical properties of hot-melt extruded hydroxypropyl cellulose films for the human nail. Drug Dev Ind Pharm 32(9):1059–66
Mididoddi PK, Repka MA (2007) Characterization of hot-melt extruded drug delivery systems for onychomycosis. Eur J Pharm Biopharm 66(1):95–105
Prodduturi S, Manek RV et al (2004) Water vapor sorption of hot-melt extruded hydroxypropyl cellulose films: effect on physico-mechanical properties, release characteristics, and stability. J Pharm Sci 93(12):3047–56
Repka MA, McGinity JW (2001) Influence of chlorpheniramine maleate on topical hydroxypropylcellulose films produced by hot-melt extrusion. Pharm Dev Technol 6(3):297–304
Repka MA, Gerding TG et al (1999) Influence of plasticizers and drugs on the physical-mechanical properties of hydroxypropylcellulose films prepared by hot melt extrusion. Drug Dev Ind Pharm 25(5):625–33
Repka MA, Battu SK et al (2007) Pharmaceutical applications of hot-melt extrusion: Part II. Drug Dev Ind Pharm 33(10):1043–57
Repka MA, Majumdar S et al (2008) Applications of hot-melt extrusion for drug delivery. Expert Opin Drug Deliv 5(12):1357–76
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 American Association of Pharmaceutical Scientists
About this chapter
Cite this chapter
Repka, M. (2013). Future Trends. In: Repka, M., Langley, N., DiNunzio, J. (eds) Melt Extrusion. AAPS Advances in the Pharmaceutical Sciences Series, vol 9. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-8432-5_19
Download citation
DOI: https://doi.org/10.1007/978-1-4614-8432-5_19
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-8431-8
Online ISBN: 978-1-4614-8432-5
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)