Abstract
In this chapter, an accumulator-capillary tube-suction line heat exchanger was developed and investigated experimentally with comparison to conventional systems with and without a liquid line-suction line heat exchanger. The experiments were carried out on AACTS, at three compressor speeds of 700, 1,500 and 2,000 rpm. The working fluid used in the experiment was R-134a, and lubricating oil was Polyalkylene Glycol (PAG) oil. Variables investigated include mass flow rate, vapour quality, discharge pressure, compression ratio, cooling capacity, power input, coefficient of performance, discharge temperature and isentropic and volumetric efficiencies of compressor. The results showed that both kinds of internal heat exchanger have positive influences on the performance of automotive AC systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASHRAE Handbook, Refrigeration (1998) American Society of Heating, Refrigeration, and Air-Conditioning Engineers, Inc., Atlanta
Domanski PA, Didion DA, Doyle JP (1994) Evaluation of suction line–liquid line heat exchange in the refrigeration cycle. Int J Refrig 17(7):487–493
Aprea C, Ascani M, de Rossi F (1999) A criterion for predicting the possible advantage of adopting a suction/liquid heat exchanger in refrigerating system. Appl Therm Eng 19:329–336
Klein SA, Reindl DT, Brownell K (2000) Refrigeration system performance using liquid suction heat exchangers. Int J Refrig 23:588–596
Kim M (2002) Performance evaluation of R-22 alternative mixtures in a breadboard heat pump with pure cross-flow condenser and counter-flow evaporator. Energy 27:167–181
Bansal PK, Rupasinghe AS (1998) A homogeneous model for adiabatic capillary tubes. Appl Therm Eng 18:207–219
Bittle RR, Pate MB (1994) A theoretical model for predicting adiabatic capillary tube performance with alternative refrigerants. ASHRAE Trans 100:52–64
Jung D, Park C, Park B (1999) Capillary tube selection for HCFC22 alternatives. Int J Refrig 22:604–614
Kuehl SJ, Goldschmidt VW (1991) Modeling of steady flows of R22 through capillary tubes. ASHRAE Trans 97:139–148
Melo C, Ferreira RTS, Boabaid Neto C, Goncalves JM, Mezavi MM (1999) An experimental analysis of adiabatic capillary tubes. Appl Therm Eng 19:669–684
Sami SM, Tribes C (1998) Numerical prediction of capillary tube behaviour with pure and binary alternative refrigerants. Appl Therm Eng 18:491–502
Sami SM, Poirier B, Dahamami AB (1998) Modeling of capillary tubes behavior with HCFC22 ternary alternative refrigerants. Int J Energy Res 22:843–855
Wong TN, Ooi KT (1996) Evaluation of capillary tube performance for CFC-12 and R-134a. Int Commun Heat Mass Transfer 23:993–1001
Wongwises S, Chan P, Luesuwanatat N, Purattanarak T (2000) Two-phase separated flow model of refrigerants flowing through capillary tubes. Int Commun Heat Mass Transfer 27:343–356
Wongwises S, Pirompak W (2001) Flow characteristics of pure refrigerants and refrigerant mixtures in adiabatic capillary tubes. Appl Therm Eng 21:845–861
Xu B, Bansal PK (2002) Non-adiabatic capillary tube flow: a homogeneous model and process description. Appl Therm Eng 22:1801–1819
Garcia-Valladares O, Perez-Segarra CD, Oliva A (2002) Numerical simulation of capillary-tube expansion devices behaviour with pure and mixed refrigerants considering metastable region. Part I: mathematical formulation and numerical model. Appl Therm Eng 22:173–182
Garcia-Valladares O, Perez-Segarra CD, Oliva A (2002) Numerical simulation of capillary-tube expansion devices behaviour with pure and mixed refrigerants considering metastable region. Part II: experimental validation and parametric studies. Appl Therm Eng 22:379–391
Melo C, Zangari JM, Ferreira RTS, Pereira RH (2000) Experimental studies on non-adiabatic flow of R-134a through capillary tubes. In: Proceedings of 2000 international refrigeration conference, Purdue, pp 305–312
Sinpiboon J, Wongwises S (2002) Numerical investigation of refrigerant flow through non-adiabatic capillary tubes. Appl Therm Eng 22:2015–2032
Bansal PK, Xu B (2003) A parametric study of refrigerant flow in non-adiabatic capillary tubes. Appl Therm Eng 23:397–408
Jain G, Bullard C (2004) Design and optimization of capillary tube-suction line heat exchangers. In: Proceedings of international refrigeration and air conditioning conference, Purdue
Islamoglu Y, Kurt A, Parmaksizoglu C (2005) Performance prediction for non-adiabatic capillary tube suction line heat exchanger: an artificial neural network approach. Energy Convers Manag 46:223–232
Yang C, Bansal PK (2005) Numerical investigation of capillary tube-suction line heat exchanger performance. Appl Therm Eng 25:2014–2028
Boewe D, Yin JM, Park YC, Bullard CW, Hrnjak PS (1999) The role of the suction line heat exchanger in transcritical R744 mobile A/C systems. SAE, Detroit, USA, paper 1999-01-0583
Boewe D, Bullard CW, Yin JM (2001) Contribution of an internal heat exchanger to transcritical R744 cycle performance. HVAC&R Res 7(2):155–168
Zhang CA, Graham BL, Dickson TR (2002) How to improve vehicle R-134a A/C system performance with a liquid line suction line heat exchanger (IHX). SAE technical paper series, 2002-01-0507
Wang S, Gu J, Dickson T (2006) Modeling and experimental investigation of accumulators for automotive air conditioning systems. Int J Refrig 29:1109–1118
Wang S, Gu J, Dickson T, Dexter J, McGregor I (2005) Vapour quality and performance of an automotive air conditioning system. Exp Thermal Fluid Sci 30:59–66
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media New York
About this chapter
Cite this chapter
Gu, J., Wang, S., Gan, Z. (2014). Two-Phase Flow in Internal Heat Exchangers. In: Two-Phase Flow in Refrigeration Systems. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-8323-6_8
Download citation
DOI: https://doi.org/10.1007/978-1-4614-8323-6_8
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-8322-9
Online ISBN: 978-1-4614-8323-6
eBook Packages: EngineeringEngineering (R0)