Abstract
Through prior research results, it is well known that energy storage devices provide additional advantages to improve stability, power-quality, and reliability of the power-supply source. The major types of storage devices being considered nowadays, viz., batteries, ultracapacitors, and flywheel energy systems, will be presented in this chapter. It is empirical that precise storage device models are created and simulated for several applications, such as hybrid electric vehicles (HEV) and various power system applications.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
B.G. Beaman, G.M. Rao, Hybrid battery and flywheel energy storage system for LEO spacecraft, in Proceedings of IEEE 13th Annual Battery Conference on Applications and Advances, Long Beach, Jan 1998, pp. 113–116
T. Boutot, L. Chang, D. Luke, A low speed flywheel system for wind energy conversion, vol. 1, in Proceedings of IEEE Canadian Conference on Electrical and Computer Engineering, Winnipeg, May 2002, pp. 251–256
A.F. Burke, Prospects for Ultracapacitors in electric and hybrid vehicles, in Proceedings of IEEE 11th Annual Battery Conference on Applications and Advances, Long Beach, Jan 1996, pp. 183–188
H.L. Chan, D. Sutanto, A new battery model for use with battery energy storage systems and electric vehicles power systems, vol. 1, in Proceedings of IEEE Power Engineering Society Winter Meeting, Singapore, Jan 2000, pp. 470–475
M. Ferdowsi, Plug-in hybrid vehicles—A vision for the future, in Proceedings of IEEE Vehicle Power and Propulsion Conference, Arlington, Sept 2007, pp. 457–462
J.H. Hirschenhofer, D.B. Stauffer, R. R. Engleman, M.G. Klett, Fuel Cell Handbook, 4th edn, DOE/FETC-99/1076
IEEE spectrum, Software Fix Extends Failing Batteries in 2006-2008 Honda Civic Hybrids: Is Cost Acceptable? (2011) http://spectrum.ieee.org/riskfactor/green-tech/advanced-cars/software-fix-extends-failing-batteries-in-20062008-honda-civic-hybrids-is-cost-acceptable. Accessed 23 August 2011
Z. Jiang, Flywheel Energy System Virtual Test Bed (VTB) Model, Available at http://vtb.engr.sc.edu/
K. Johansson, P. Alvfors, Steady-state model of a proton exchange membrane fuel cell system for automotive applications, in Proceedings of International Conference on Efficiency, Costs, Optimization, Simulation, and Environmental Aspects of Energy and Process Systems, Enschede, The Netherlands, July 2000, pp. 725–736
H. Kim, H-D. Ha, Design of interface circuits with electrical battery models, IEEE Trans. Ind. Electron, 44(1), pp. 81–86, (1997)
J. Marcos, A. Lago, C. M. Penalver, J. Doval, A. Nogueira, C. Castro, J. Chamadoira, An approach to real behavior modeling for traction lead-acid batteries, vol. 2, in Proceedings of IEEE 32nd Annual Power Electronic Specialists Conference, Vancouver, June 2001, pp. 620–624
L.J. Reinke, Tutorial Overview of Flywheel Energy Storage in a Photovoltaic Power Generation System, vol. 2, in Proceedings of IEEE Canadian Conference on Electrical and Computer Engineering, Vancouver, Sept 1993, pp. 1161–1164
R.L. Spyker, R.M. Nelms, Double layer capacitor/DC–DC converter system applied to constant power loads, vol. 1, in Proceedings of IEEE 31st Intersociety Energy Conversion Engineering Conference, Washington, Aug 1996, pp. 255–259
US DOE, Energy Efficiency and Renewable Energy (2008), Available at http://www.eere.energy.gov/hydrogenandfuelcells/fuelcells/fc_types.html. Accessed Jan 2008
R.S. Weissbach, G.G. Karady, R. G. Farmer, A combined uninterruptible power supply and dynamic voltage compensator using a flywheel energy storage system, IEEE Trans. Power Deliv. 16(2), 265–270 (2001)
X. Yan, D. Patterson, Improvement of drive range, acceleration, and deceleration performance in an electric vehicle propulsion system, vol. 2, in Proceedings of IEEE 30th Annual Power Electronic Specialists Conference, Charleston, South Carolina, June 1999, pp. 638–643
J.P. Zheng, T.R. Jow, M.S. Ding, Hybrid power sources for pulsed current applications. IEEE Trans. Aerosp. Electron. Syst. 37(1), 288–292 (2001)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media New York
About this chapter
Cite this chapter
Williamson, S.S. (2013). EV and PHEV Energy Storage Systems. In: Energy Management Strategies for Electric and Plug-in Hybrid Electric Vehicles. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-7711-2_3
Download citation
DOI: https://doi.org/10.1007/978-1-4614-7711-2_3
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-7710-5
Online ISBN: 978-1-4614-7711-2
eBook Packages: EnergyEnergy (R0)