Abstract
The calorimetric gas sensor is a device which uses calorimetry as the transduction principle and operates by measuring the heat of a reaction on the sensor surface. It is known that the exothermic nature of the combustion (the oxidation reaction) causes a rise in temperature. The effectiveness of combustion-type gas sensors depends on the efficiency of the catalysts used and the present chapter analyzes these catalysts and compares their porformances. The chapter includes 5 figures, 1 table, and 28 references.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Casey V, Cleary J, D’arcy G, Mcmonagle JB (2003) Calorimetric combustible gas sensor based on a planar thermopile array: fabrication, characterisation, and gas response. Sens Actuators B 96:114–123
Cavicchi RE, Poirier GE, Tea NH, Afridi M, Berning D, Hefner A, Suehle J, Gaitan M, Semancik S, Montgomery C (2004) Micro-differential scanning calorimeter for combustible gas sensing. Sens Actuators B 97:22–30
Choi Y, Tajima K, Sawaguchi N, Shin W, Izu N, Matsubara I, Murayama N (2005) Planar catalytic combustor application for gas sensing. Appl Catal A 287:19–24
Debeda H, Rebiere D, Pistre J, Menil F (1995) Thick-film pellistor array with a neural-network posttreatment. Sens Actuators B 27:297–300
Debeda H, Dulau L, Dondon P, Menil F, Lucat C, Massok P (1997) Development of a reliable methane detector. Sens Actuators B 44:248–256
Deng YQ, Nevell TG, Ewen RJ, Honeybourne CL, Jones MG (1993) Sulfur poisoning, recovery and related phenomena over supported palladium, rhodium and iridium catalysts for methane oxidation. Appl Catal A 101:51–62
Ehrhardt JJ, Colin L, Jamois D (1997) Poisoning of platinum surfaces by hexamethyldisiloxane (HMDS): application to catalytic methane sensors. Sens Actuators B 40:117–124
Firth JG, Jones A, Jones TA (1973) The principles of the detection of flammable atmospheres by catalytic devices. Combust Flame 21:303–311
Furjes P, Adam M, Ducso C, Zettner J, Barsony I (2005) Thermal effects by the sensitive coating of calorimetric gas sensors. Sens Actuators B 111:96–101
Gentry SJ, Walsh PT (1984) Poison-resistant catalytic flammable-gas sensing elements. Sens Actuators 5:239
Gentry SJ, Walsh PT (1983) Thioresistant flammable gas sensing elements. Stud Surf Sci Catal 16:203–212
Gentry SJ, Walsh PT (1987) The theory of poisoning of catalytic flammable gas-sensing elements. In: Moseley PT, Tofield BC (eds) Solid state gas sensors. Adam Hilger, Bristol
Haack LP, Otto K (1995) X-Ray photoelectron spectroscopy of Pd/γ-alumina and Pd foil after catalytic methane oxidation. Catal Lett 34:31–40
Han CH, Hong DW, Han SD, Gwak J, Singh KC (2007a) Catalytic combustion type hydrogen gas sensor using TiO2 and UV-LED. Sens Actuators B 125:224–228
Han CH, Hong DW, Kim IJ, Gwak J, Han SD, Singh KC (2007b) Synthesis of Pd or Pt/titanate nanotube and its application to catalytic type hydrogen gas sensor. Sens Actuators B 128:320–325
Katti VR, Debnath AK, Gadkari SC, Gupta SK, Sahni VC (2002) Passivated thick film catalytic type H2 sensor operating at low temperature. Sens Actuators B 84:219–225
Krebs P, Grisel A (1993) A low-power integrated catalytic gas sensor. Sens Actuators B 13:155–158
Lee JS, Park JW, Shin SM (1997) Fabrication of a micro catalytic gas sensor using thin film process and Si anisotropic etching techniques. Sens Actuators B 45:265–269
Miller JB (2001) Catalytic sensors for monitoring explosive atmospheres. IEEE Sensors J 1(1):88–93
Morooka Y, Ozaki A (1966) Regularities in catalytic properties of metal oxides in propylene oxidation. J Catal 5:116–124
Morooka Y, Morikawa Y, Ozaki A (1967) Regularity in the catalytic properties of metal oxides in hydrocarbon oxidation. J Catal 7:23–32
Nishibori M, Tajima K, Shin W, Izu N, Itoh T, Matsubara I (2006) CO oxidation catalyst of Au-TiO2 on the thermoelectric gas sensor. J Ceram Soc Jpn 115:34–41
Nishibori M, Shin W, Houlet L, Tajima K, Izu N, Itoh T, Matsubara I (2008) Long-term stability of Pt/alumina catalyst combustors for micro-gas sensor application. J Eur Ceram Soc 28:2183–2190
Nishibori M, Shin W, Izu N, Itoh T, Matsubara I (2011) CO combustion catalyst for micro gas sensor application. J Mater Sci 46:1176–1183
Riegel J, Härdtl KH (1990) Analysis of combustible gases in air with calorimetric gas sensors based on semiconducting BaTiO3 ceramics. Sens Actuators B 1:54–57
Romero-Pascual E, Larrea A, Monzon WA, Gonzalez RD (2002) Thermal stability of Pt/Al2O3 catalysts prepared by sol-gel. J Solid State Chem 168:343–353
Wang Y, Tong MM, Zhang D, Gao Z (2011) Improving the performance of catalytic combustion type methane gas sensors using nanostructure elements doped with rare earth cocatalysts. Sensors 11:19–31
Yasuda KE, Visser JH, Bein T (2009) Molecular sieve catalysts on microcalorimeter chips for selective chemical sensing. Microporous Mesoporous Mater 119:356–359
Zwinkels MFM, Jaras SG, Menon PG (1993) Catalytic materials for high-temperature combustion. Catal Rev Sci Eng 35(3):319–358
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Korotcenkov, G. (2013). Catalysts Used in Calorimetric (Combustion-Type) Gas Sensors. In: Handbook of Gas Sensor Materials. Integrated Analytical Systems. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-7165-3_11
Download citation
DOI: https://doi.org/10.1007/978-1-4614-7165-3_11
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-7164-6
Online ISBN: 978-1-4614-7165-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)