Paint and Coatings

  • O. V. Roussak
  • H. D. Gesser
Chapter

Abstract

The purpose of paints and coating is primarily to prevent corrosion and wear. The aesthetic aspect is usually of secondary importance. The nature of the protective coating is usually determined by the surface and the duration of the desired protection. Needless to say, the cost of the coating is another factor which can vary considerably from place to place, as well as with time. The concern for the environment is another factor which must be taken into consideration since the drying process may involve the release of volatile organic compounds (VOC), which can contribute to smog or other undesirable atmospheric conditions.

Keywords

Permeability Chromate Cobalt Manganese Ozone 

Further Reading

  1. 1.
    Gulrajani ML (2010) Colour measurement: principles, advances and industrial applications. Woodhead, Cambridge/PhiladelphiaGoogle Scholar
  2. 2.
    Weldon DG (2009) Failure analysis of paints and coatings. Wiley, ChichesterGoogle Scholar
  3. 3.
    Hellio C (2009) Advances in marine antifolding coatings and technologies. Woodhead, CRC, Oxford/Boca RatonCrossRefGoogle Scholar
  4. 4.
    Talbert R (2008) Paint technology handbook. CRC Press, Boca RatonGoogle Scholar
  5. 5.
    Marrion A (2004) The chemistry and physics of coatings. Royal Society of Chemistry, Cambridge, UKCrossRefGoogle Scholar
  6. 6.
    Lambourne R, Strivens TR (1999) Paint and surface coatings: theory and practice, 2nd edn. Woodhead, New YorkCrossRefGoogle Scholar
  7. 7.
    Ash M, Ash I (1996) Handbook of paint and coating raw materials, vol 1 and 2. Gower (UK), Ashgate Brookfield, VermontGoogle Scholar
  8. 8.
    Innes H (1995) Environmental acceptable coatings. BBC, New YorkGoogle Scholar
  9. 9.
    LeSota S (ed) (1995) Coatings encyclopedic dictionary. Federation of Societies for Coatings Technology, Blue BellGoogle Scholar
  10. 10.
    Bouquet FL (1994) Paint and surface coatings for space, 2nd edn. Systems Co., CarlsborgGoogle Scholar
  11. 11.
    Boxbaum G (1993) Industrial inorganic pigments. VCH, New YorkGoogle Scholar
  12. 12.
    Lambourne R (1993) Paint and surface coatings. Prentice Hall, ParamusGoogle Scholar
  13. 13.
    Stage D (ed) (1993) Paints, coating and solvents. VCH, New YorkGoogle Scholar
  14. 14.
    Skerry BS, Eden DA (1991) Characterisation of coatings performance using electrochemical noise analysis. Prog Organ Coat 19:379CrossRefGoogle Scholar
  15. 15.
    Woodbridge R (ed) (1991) Principles of paint formulation. Chapman and Hall, New YorkGoogle Scholar
  16. 16.
    Labana S (1991) Advanced coatings technology. ESD, The Engineering Society, SouthfieldGoogle Scholar
  17. 17.
    Doorgeest T et al (1990) Elsevier’s paint dictionary. Elsevier, New YorkGoogle Scholar
  18. 18.
    Morgan WM (1990) Outline of paint technology, 3rd edn. Wiley, New YorkGoogle Scholar
  19. 19.
    Schuerman G, Bruzan R (1989) Chemistry of paint. J Chem Edu 66:327CrossRefGoogle Scholar
  20. 20.
    DeRenzo DJ (ed) (1987) Handbook of corrosion resistant coatings. Noyes, Westwood, New JerseyGoogle Scholar
  21. 21.
    Skerry BS, Eden DA (1987) Electrochemical testing to assess corrosion protective coatings. Prog Organ Coat 15:269CrossRefGoogle Scholar
  22. 22.
    Weesmetal GE (ed) (1981) Paint handbook. McGraw-Hill, New YorkGoogle Scholar
  23. 23.
    Turner GPA (1980) Introduction to paint chemistry and principles of paint technology, 2nd edn. Chapman and Hall, LondonGoogle Scholar
  24. 24.
    (1974) Surface coatings—oil and color chemists’ association of Australia, vol 2., TAFE Educational ... 41–42, Chapman and Hall, LondonGoogle Scholar
  25. 25.
    Toropov NA (1967) Heat resistant coatings (trans: Russian). Consultants Bureau, New YorkGoogle Scholar
  26. 26.
    Parker DH (1966) Principles of surface coating technology. Interscience, New YorkGoogle Scholar
  27. 27.
    Nylin P, Sunderland E (1965) Modern surface coatings. Interscience, New YorkGoogle Scholar
  28. 28.
    Taylor CJA, Marks S (eds) (1962) Paint technology manuals: I, nonconvertible coatings. II, solvents, oils, resin and driers. III, convertible coatings, oil and colour chemists association. Chapman and Hall, LondonGoogle Scholar
  29. 29.
    National Paint and Coating Association. http://www.paint.org/index.htm
  30. 30.
    International Centre for Coating Technology, PRA. http://www.pra.org.uk
  31. 31.
    Paint and Coating Mfg. Resources. http://www.pprc.org/pprc/sbap/painting.html
  32. 32.
    Paint and Coating Industry. http://www.pomag.com
  33. 33.
    Canadian Paint and Coating Association. http://www.cdnpaint.org
  34. 34.
  35. 35.
    Resource center, PCRC. http://www.paintcenter.org/
  36. 36.
    History of coatings. http://www.paint.org/history.htm
  37. 37.
  38. 38.

Copyright information

© Springer Science+Business Media New York 2012

Authors and Affiliations

  • O. V. Roussak
    • 1
  • H. D. Gesser
    • 1
  1. 1.Chemistry DepartmentUniversity of ManitobaWinnipegCanada

Personalised recommendations