Heat Transfer

  • Peter O’Kelly


In accordance with the second law of thermodynamics heat is transferred unaided from a higher temperature to a lower temperature, but not in the opposite direction. Heat may be transferred unaided by any of three processes: conduction, convection or radiation.


Heat Transfer Heat Transfer Coefficient Emissive Power Film Condensation Heat Transfer Correlation 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    W.H. Press et al Numerical Recipes in C, 2nd Edition, Cambridge University Press, 1992Google Scholar
  2. 2.
    G.H. Golub, C.F. van Loan Matrix Computations, 3rd Edition John Hopkins Univ. Press, 1996Google Scholar
  3. 3.
    L. Fox and D.F. Mayers Computing Methods for Scientists and Engineers, Monographs on Numerical Analysis, Oxford University Press, Reprint, 1977Google Scholar
  4. 4.
    A. Quarteroni, R. Sacco, F. Saleri Numerical Mathematics, 2nd Edition, Springer Texts in Applied Mathematics No. 37, 2007Google Scholar
  5. 5.
    G. Bader, P. Deuflhard Numerische Mathematik 41, pp 373–398, 1983Google Scholar
  6. 6.
    P.J. Roache Computational Fluid Dynamics, Revised Edition Academic Press, 1982Google Scholar
  7. 7.
    A. Prosperetti, G. Tryggvason (Edit.) Computational Methods for Multiphase Systems, Cambridge University Press, Cambridge, UK, 2009Google Scholar
  8. 8.
    N. Gershfeld The Nature of Mathematical Modeling, Cambridge Univ. Press, 1999Google Scholar
  9. 9.
    Steinmueller Steam Generation, Vulkan Verlag, Essen, 2nd English Edition, 1994Google Scholar
  10. 10.
    Wagner, Kurse Properties of water and steam: the industrial standard IAPWS-IF97 for the thermodynamic properties and supplementary equations for other properties; tables based on these equations., Springer Berlin, 1998Google Scholar
  11. 11.
    K. Scheffler, N. Rosner, J. Straub, U. Grigull Der Neue Internationale Standard der dynamischen Viskosität von Wasser und Dampf, Brennstoff-Wärme-Kraft 30 Nr. 2, February 1978Google Scholar
  12. 12.
    J.P. Holman Heat Transfer, McGraw Hill New York, 1991Google Scholar
  13. 13.
    P.J. Stuttaford, P.A. Rubini Assessment of a Radiative Heat Transfer Model for a New Gas Turbine Combustor Preliminary Design Tool, 35th Aerospace Sciences Meeting AIAA 97-0294, 1997Google Scholar
  14. 14.
    S.P. Fuss, A. Hamins An Estimate of the Correction to be Applied to radiant Flame Measurements due to Attenuation by Atmospheric CO 2 and H 2 O, Fire Safety Journal 37 pgs 181–190, 2002CrossRefGoogle Scholar
  15. 15.
    P. Basu, C. Kefa, L. Jestin Boilers and Burners Design and Theory, Mechanical Engineering Series, Springer Verlag, 2000Google Scholar
  16. 16.
    P.K. Swamee, A.K. Jain Explicit Equation for Pipe Flow Problems, Journal of Hydraulic Division, ASCE, Vol 102, No. 5, May:657–664, 1976Google Scholar
  17. 17.
    Perry’s Chemical Engineers’ Handbook, 6th Edition McGraw-HillGoogle Scholar
  18. 18.
    Fan Engineering, Buffalo Forge Company, Buffalo, NY, USA, 1961Google Scholar
  19. 19.
    B. Eck Ventilatoren, 5th Edition, Springer Verlag BerlinGoogle Scholar
  20. 20.
    B. Eck Fans, Pergamon Press LondonGoogle Scholar
  21. 21.
    A.J. Osiadacz Simulation and Analysis of Gas Networks, Gulf Publishing, 1987Google Scholar
  22. 22.
    Sir Frank Whittle Gas Turbine Aero-Thermodynamics, Pergamon Press, Oxford, UK, 1981Google Scholar
  23. 23.
    R.K. Turton Principles of Turbomachinery, Chapman and Hall, 2nd Edition, 1985Google Scholar
  24. 24.
    C.E. Brennen Hydrodynamics of Pumps, Oxford University Press, OUP/Concepts Edi, White River Jn, VT, USA, 1994Google Scholar
  25. 25.
    M.P. Boyce Gas Turbine Engineering Handbook Butterworth-Heinemann 2nd Edition, 2002Google Scholar
  26. 26.
    L.G. Tetu Improving Centrifugal Compressor Performance by Optimizing Diffuser Surge Control (Variable Diffuser Geometry) and Flow Control (Inlet Guide Vane) Device Settings International Compressor Engineering Conference 2004, Paper 1719, Purdue UniversityGoogle Scholar
  27. 27.
    F. Willems Modeling and Control of Compressor Flow Instabilities Report No. WFW 96.151, Eindhoven University of Technology, Faculty of Mechanical Engineering, 1997Google Scholar
  28. 28.
    E.M. Greitzer Surge and Rotating Stall in Axial Flow Compressors, Part I: Theoretical Compression System Model, Journal of Engineering for Power, 98:190–198, 1976CrossRefGoogle Scholar
  29. 29.
    F.K. Moore, E.M. Greitzer A Theory of Post-Stall Transients in Axial Compressor Systems: Part II-Application, Journal of Engineering for Gas Turbines for Power, 108:231–239, 1986CrossRefGoogle Scholar
  30. 30.
    J.T. Gravdahl, O. Egeland Control of the Three State Moore-Greitzer Compressor Model using a Close-Coupled Valve, Proc. 1997 European Control Conference, July 1997Google Scholar
  31. 31.
    J.T. Gravdahl, O. Egeland A Moore-Greitzer Axial Compressor Model with Spool Dynamics, Proc 36th IEEE Conference on Decision and Control, 1997Google Scholar
  32. 32.
    A. Hafaifa, A. Daoudi, M. Guemana SCADA for Surge Control, Control, pgs 69–71, March 2011Google Scholar
  33. 33.
    C. Hayashi Nonlinear Oscillations in Physical Systems, McGraw-Hill, 1964Google Scholar
  34. 34.
    G.G. Mejeoumov Improved Cement Quality and Grinding Efficiency by Means of Closed Mill Circuit Modeling Ph.D Thesis, Texas A&M University, 2007Google Scholar
  35. 35.
    R.C. Juvinall, K.M. Marshek Fundamentals of Machine Component Design, John Wiley and Sons, Inc., New York, 1991Google Scholar
  36. 36.
    A.M. Trzynadlowski Control of Induction Motors, Academic Press, San Diego, CA, USA, 2001Google Scholar
  37. 37.
    T. Perrotin, D. Clodic Fin Efficiency Calculation in Enhanced Fin-and-Tube Heat Exchangers in Dry Conditions, International Congress of Refrigeration 2003, Washington D.C. USAGoogle Scholar
  38. 38.
    K.T. Hong, R.L. Webb Calculation of Fin Efficiency for Wet and Dry Fins, HVAC&R Research, Vol 2, No. 1:pp27–41, 1996CrossRefGoogle Scholar
  39. 39.
    S.A. Habbits, T.J. Sheer, H.N. Jawurek, M. Lander, W. Schmitz Simulation and Measurement of the Thermal Performance of Rotary Regenerative Boiler Air Heaters, Proc. of the 11th International Heat Transfer Conference, Vol. 6, Aug 1998, KoreaGoogle Scholar
  40. 40.
    F. Bowman Introduction to Bessel Functions, Dover Publications, 2nd Edit. New York, 1958Google Scholar
  41. 41.
    I.N. Sneddon Fourier Transforms, McGraw-Hill Series in Pure and Applied mathematics, 1951Google Scholar
  42. 42.
    H.S. Carslaw, J.C. Jaeger Conduction of Heat in Solids, Oxford University Press, 2nd Edit. 1959 Clarendon Press, NY, USA, 1947Google Scholar
  43. 43.
    W.M. Rohsenow, J.P. Hartnett, E.A. Ganic Handbook of Heat Transfer Fundamentals, McGraw-Hill Book Company, London, 1981Google Scholar
  44. 44.
    W.M. Rohsenow, J.P. Hartnett, Y.I. Cho Handbook of Heat Transfer, 3rd. Edition McGraw-Hill Book Company, New York, 1998Google Scholar
  45. 45.
    L.M. Jiji Heat Conduction, Jaico Publishing Mumbai, 2003Google Scholar
  46. 46.
    M.N.Özisik Heat Conduction, 2nd Edit. Wiley, 1993Google Scholar
  47. 47.
    S. Kakac (Ed.) Boilers, Evaporators and Condensers, Wiley Interscience, 1991Google Scholar
  48. 48.
    H.C. Hottel, A.F. Sarofim Radiative Transfer, McGraw-Hill, 1967Google Scholar
  49. 49.
    K. Kuehlert, U. Renz A Comprehensive Radiation Model for Numerical Simulation of Pulverised Coal Flames, Proc. 11th International Heat Transfer Conference (Seoul Korea) Vol 7, 1988Google Scholar
  50. 50.
    S. Zaichik Application of a Diffusion-Inertia Model for 3-Dimensional Numerical Simulation of Solid Fuel Combustion in Furnace Chambers, Proc. 11th International Heat Transfer Conference (Seoul Korea) Vol 7, 1988Google Scholar
  51. 51.
    I.T. Shvets et al Heat Engineering, Mir Publishers Moscow - English Translation, 1975Google Scholar
  52. 52.
    R.B.Stull Meteorology for Scientists and Engineers, 2nd Edition, Brooke/Cole-Thomson Learning, 1999Google Scholar
  53. 53.
    I.W. Smith The Combustion of Coal Chars: A Review, 19th Symposium (International) on Combustion, The Combustion Institute, pp 1045–1065, 1982Google Scholar
  54. 54.
    A. McKenzie, I.W. Smith, G.A.D. Szpindler, J. Institute of Fuel, 47, 75, 1974Google Scholar
  55. 55.
    K.J. Åstrom, R.D. Bell Simple Drum-Boiler Models, IFAC Symposium Power Systems, Modelling and Control Applications, Brussels, Sept 1988Google Scholar
  56. 56.
    R.D. Bell, K.J. Åstrom A Non-Linear Model for Steam Generation Process, IFAC 12th World Congress, Sydney Australia, 1993Google Scholar
  57. 57.
    K.J. Åstrom, R.D. Bell A Fourth Order Non-Linear Model for Drum-Boiler Dynamics, 13th Triennial World Conference, San Francisco USA, 1996Google Scholar
  58. 58.
    Steam - Its Generation and Use The Babcock & Wilcox Company, 1978Google Scholar
  59. 59.
    S.S. Bogdanovic, S.M. Jovanovic Simulation and Modelling of Once-through Benson and Sulzer Steam Generators, IFAC Symposium Power Systems, Modelling and Control Applications, Brussels, Sept. 1988Google Scholar
  60. 60.
    W.J. Peet, T.K. Leung Development and Application of a Dynamic Simulation Model for a Drum Type Boiler with Turbine Bypass, International Power Conference, Singapore, March 1995Google Scholar
  61. 61.
    W. Traupel Thermische Turbomachinen, Vols I and II, 3rd Edition, Springer Verlag, BerlinGoogle Scholar
  62. 62.
    A.S. Leyzerovich Steam Turbines for Modern Fossil-Fuel Power Plants, Fairmont Press, 2008Google Scholar
  63. 63.
    D. Butterworth and G.F. Hewitt Two Phase Flow and Heat Transfer, Harwell Series, Oxford Uni Press, 1977Google Scholar
  64. 64.
    G. Brown Heat transmission by condensation of steam on a spray of water drops, Inst. Mech. Engrs. Proc. Discussion on heat transfer, pp 49–52, 1951Google Scholar
  65. 65.
    J.R.S. Thom Prediction of pressure drop during forced circulation boiling of water, Int. J. of Heat and Mass Transfer 7 (1964) pgs. 709–824CrossRefGoogle Scholar
  66. 66.
    R.W. Lockhart, R.C. Martinelli Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes, Chemical Engineering Progress Symposium 45(1), pp. 39–48Google Scholar
  67. 67.
    R.C. Martinelli, D.B. Nelson Prediction of Pressure Drop during Forced-Circulation Boiling of Water, Transactions of the ASME 70(6) 45(1), pp. 695–702Google Scholar
  68. 68.
    G.B. Wallis One-Dimensional Two-Phase Flow, McGraw-Hill Book Company, New York, 1996Google Scholar
  69. 69.
    D. Chisholm A Theoretical Basis for the Lockhart-Martinelli Correlation for Two-Phase Flow, Int. J. Heat and Mass transfer, 10(12), pp. 1767–1778, 1973CrossRefGoogle Scholar
  70. 70.
    D. Chisholm The Influence of Mass Velocity on Friction Pressure Gradients during Steam-Water Flow, Thermodynamic and Fluid Mechanics Group Convection, Inst. of Mech. Engrs Proceedings, Bristol Vol. 182 Pt. 3H, pp. 336–341, 1968Google Scholar
  71. 71.
    D. Chisholm Pressure Gradients during the Flow of Evaporating Two-Phase Mixtures in Smooth Tubes and Channels, Int. J. Heat and Mass Transfer 16(2), pp. 347–358Google Scholar
  72. 72.
    S.M. Ghiaasiaan Two-phase Flow, Boiling and Condensation in Conventional and Miniature Systems, Cambridge University Press, 2008Google Scholar
  73. 73.
    A. Grzebielec, A. Rusowicz Thermal Resistance of Steam Condensation in Horizontal Tube Bundles, Journal of Power Technologies 91(1) pp. 41–48, 2011Google Scholar
  74. 74.
    J.G. Collier Convective Boiling and Condensation, 2nd. Edition, McGraw-Hill Book Company, New York, 1996Google Scholar
  75. 75.
    C.J. Baroczy A Systematic Correlation for Two-Phase Pressure Drop, Chemical Engineering Progress Symposium 62(44), pp. 232–239, 1966Google Scholar
  76. 76.
    S.G. Bankhoff A Variable Density Single Fluid Model Two-Phase Flow with Particular Reference to Steam-Water, J. Heat Transfer 11(Series 13) 265–272 1960 Meeting, Ispra Italy, 1979Google Scholar
  77. 77.
    L. Friedel Improved Friction Pressure Drop Correlations for Horizontal and Vertical Two Phase Pipe Flow, Paper E2, European Two Phase Flow Group Meeting, Ispra Italy,1979Google Scholar
  78. 78.
    A. Cicchitti, C. Lombardi, M. Silvestri, G. Soldaini, R. Zavatorelli Two-phase Cooling Experiments - Pressure Drop, Heat Transfer and Burn-out Measurements, Energia Nucleare 7(6) 407–425, 1960Google Scholar
  79. 79.
    K.E. Gungor and R.H.S. Winterton A general correlation for flow boiling in tubes and annuli, International Journal of Heat and Mass Transfer, 29(3), 351–358, 1986MATHCrossRefGoogle Scholar
  80. 80.
    K.E. Gungor, R.H.S. Winterton Simplified general correlation for saturated flow boiling and comparisons of correlations with data, Chemical Engineering Research and Design. 65 148–156, 1987Google Scholar
  81. 81.
    D. Steiner, J. Taborek Flow Boiling Heat Transfer of Single Components in Vertical Tubes, Heat Transfer Eng., 13, pp. 4368, 1992Google Scholar
  82. 82.
    VDI Wärme-Atlas, VDI-Verlag Düsseldorf Germany, 1993Google Scholar
  83. 83.
    A.J. Ghajar Non-Boiling Heat Transfer in Gas-Liquid Flow in Pipes - A Tutorial, J. of the Braz. Soc. of Mech. Sci. and Eng.27, 1, pp. 46–73, Jan-March 2005Google Scholar
  84. 84.
    J.C. Chen A correlation for boiling heat transfer to saturated fluids in convective flow, ASME Paper 63-HT-34, Boston, 1963Google Scholar
  85. 85.
    H. Muller-Steinhagen, K. Heck A Simple Pressure Drop Correlation for Two-Phase Flow in Pipes, Chem. Engr. Process, 20, pp.297–308, 1986CrossRefGoogle Scholar
  86. 86.
    G. Riemenschneider Analyse der Anlagendynamik eines Steinkohlbefeurerten Grossdampferzeugers mit vorgeschalteter Gasturbine, Energieerzeugung, Reihe 6 Nr. 228, 1989Google Scholar
  87. 87.
    TRAC-PD2 An Advanced Best-Estimate Computer Program for PWR LOCA Analysis, NUREG/CR-2054, Los Alamos Scientific LaboratoryGoogle Scholar
  88. 88.
    S.M. Zivi Estimation of steady-state steam void fraction by means of the principle of minimum entropy production, J. Heat Transfer 86, 247–52, 1964CrossRefGoogle Scholar
  89. 89.
    A.A. Armand, G.G. Treschev Investigation of the Resistance During the Movement of Steam Water Mixtures in a Heated Boiler Pipe at High Pressures, AERE-Lib/Trans. 816, Jan. 1959Google Scholar
  90. 90.
    M.A. Woldesemayat, A.J. Ghajar Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes, Int. Journal of Multiphase Flow, 33 pp. 347–370 Elsevier, 2007Google Scholar
  91. 91.
    R. Doležal Two-phase pressure loss in heated boiler tubes, VGB Kraftswerktechnik 52 (1972) Nr 1, pgs 11–15Google Scholar
  92. 92.
    R. Doležal Vorgänge beim Anfahren eines Dampferzeugers, Vulkan Verlag, 1977Google Scholar
  93. 93.
    B.P. Vitalis, P.J. Hunt Constant and Sliding Pressure Options for New Supercritical Plants, Technical Publication, Riley Power, Power-Gen International, Las Vegas, 2005Google Scholar
  94. 94.
    M. Palkes, E.S. Sadlon, A. Salem State-of-the-Art Large Capacity Sliding Pressure Supercritical Steam Generators, ABB SPERI Power Generation Conference, 1994Google Scholar
  95. 95.
    H.G. Kwatny, J.W. Bauerle Simulation analysis of the stability of coal-fired furnaces at low loads, Second IFAC Workshop on Modelling and Control of Electric Power Plants, Drexel University, Philadelphia Sept 16–18, 1986Google Scholar
  96. 96.
    F. Brandt Brennstoffe und Verbrennungsrechung, FDBR Fachbuchreihe Band 1, Vulkan Verlag, 1981Google Scholar
  97. 97.
    S.M. Cho Furnace Combustion and Heat Transfer in Large Utility Boilers, Vol 1 Proc 11th International Heat Transfer Conference, Korea, 1998Google Scholar
  98. 98.
    I. Nedelkovski, I. Vilos, T. Geramitcioski Finite Element Solution of Navier-Stokes Equations for Steam Flow and Heat Transfer, World Academy of Science and Engineering and Technology 5, 2005Google Scholar
  99. 99.
    L.D. Berman, S.N. Fuks Mass Transfer in Condensers with Horizontal Tubes when Steam Contains Air, Teploenergetika, 5, pp. 66–74, 1958Google Scholar
  100. 100.
    E.N. Fuller, P.D. Schettler, J.C. Giddings New Method for Prediction of Binary Gas Phase Diffusion Coefficients, Industrial and Engineering Chemistry, 58(5), 19, 1966Google Scholar
  101. 101.
    Heat Exchange Institute Standards for Steam Surface Condensers, 9th Edition, 2001Google Scholar
  102. 102.
    H.R. Jacobs, D.S. Cook Direct Condensation on Non-circulating Drop, Proc. 6th Int. Heat Transfer Conf., Toronto, 2, pp.389–393, 1978Google Scholar
  103. 103.
    K.N. Murty Surface Condensers 1. Find the most compact surface condenser, Chemical Engineering, January 18, 1988Google Scholar
  104. 104.
    J. van Standen, L. Pretorius, M.P. Meyer Simulation of Heat Exchange in Large Air Cooled Condensers, Proc 11th International Heat Transfer Conference Vol 6, Korea, 1998Google Scholar
  105. 105.
    P. Johnman, K. Hitze, E. Fyvie, H. Morris, D. Gosden, B. Taber Eraring Power Station, Technical Paper, Advanced Process Control, The Warren Centre, Sydney University, Australia, October 1987Google Scholar

Copyright information

© Springer Science+Business Media New York 2013

Authors and Affiliations

  • Peter O’Kelly
    • 1
  1. 1.Costec Systems Pty Ltd.SydneyAustralia

Personalised recommendations