Abstract
This chapter presents modeling and simulation of a complex multistage multiproduct production line with four closed loop networks configuration, which also act as a virtual cell. This allows for a greater understanding of the functions within the production line through the simplification of the production flow with the addition of buffers between the cells. Virtual cells are crucial in this instance due to the dynamic configuration, which could help production system designers in optimizing the complex configuration of production.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Benedettini O, Tjahjono B (2009) Towards an improved tool to facilitate simulation modelling of complex manufacturing systems. Int J Adv Manuf Technol 43:191–199
Papadopoulos CT, O`Kelly MEJ, Vidalis MJ, Spinellis D (2009) Analysis and design of discrete part production lines. In: Springer optimization and its applications, vol 31. Springer, New York. ISBN 978-0-387-89493-5
Ferreira JJP (1995) Suporte do Ciclo de Vida dos Sistemas Integrados de Fabrico através de Modelos Executáveis sobre Infra-estruturas de Integração. Tese de Doutoramento em Engenharia Electrotécnica e de Computadores, Faculdade de Engenharia da Universidade do Porto
Ilar T (2008) Production simulation as a management tool. Doctoral Thesis, University of Technology, Luleå, ISSN: 1402-1544
Resano Lázaro A (2007) Análisis Funcional y Optimización de la Distribuición en Planta de una Línea de Ensamblaje de Automóviles. PhD Thesis, Departamento de Ingeniería Mecánica
Resano Lázaro A, Luis Pérez CJ (2008) Analysis of an automobile assembly line as a network of closed loops working in both, stationary and transitory regimes. Int J Prod Res 46(17):4803–4825, ISSN: 1366-588X
Mclean CR, Bloom HM, Hopp TH (1982) The virtual manufacturing cell. In: Proceedings of fourth iFAC/IFIP conference on information control problems in manufacturing technology, USA, pp 105–111
Alves AC (2007) Projecto Dinâmico de Sistemas de Produção Orientados ao Produto. Tese de Doutoramento em Engenharia de Produção e Sistemas, Universidade do Minho
Drolet J, Abdulnour G, Rheault M (1996) The cellular manufacturing evolution. Comp Ind Eng 31(1–2):139–142
Mak KL, Wang XX (2002) Production scheduling and cell formation for virtual cellular manufacturing systems. Int J Adv Manuf Technol 20:144–152
Nomden G, van der Zee D-J (2008) Virtual cellular manufacturing: configuring routing flexibility. Int J Prod Econ 112(1):439–451
Ko K-C, Egbelu PJ (2003) Virtual cell formation. Int J Prod Res 41(11):2365–2389
Fung RYK, Liang F, Jiang Z, Wong TN (2008) A multi-stage methodology for virtual cell formation oriented agile manufacturing. Int J Adv Manuf Technol 36:798–810
Khilwani N, Ulutas BH, Attila Islier A, Tiwari MK (2009) A methodology to design virtual cellular manufacturing systems. J Intell Manuf, Springer, 22(4): 533–544
Baykasoglu A (2003) Capability-based distributed layout approach for virtual manufacturing cells. Int J Prod Res 41(11):2597–2618
Ares Gómez E, Peláez Lourido G, Gómez Lourido R (1990) Modelo Dinamico para la Evaluacion de la Eficiencia de Estrategias de Produccion en Ambiente CIM. In: Anales de Ingeniería Mecánica, Revista de la Asociación Española de Ingeniería Mecánica, Diciembre 1990
Peláez Lourido G (1999) Arquitectura y Modelo integral de un Sistema de Fabricación multietapa/multiproducto. Thesis Doctoral, Universidade de Vigo
Ferreira LP, Ares Gómez E, Peláez Lourido G, Tjahjono B (2011) Optimization of a multiphase multiproduct production line based on virtual cells. In: Lecture notes in engineering and computer science: Proceedings of the world congress on engineering (WCE2011), London, 6–8 July 2011, pp 616–621
Ares Gómez JE (1986) Estructura Jerárquica de Metodologías para la Implantación y Gestión de Sistemas de Fabricación Flexible. Tesis Doctoral, Universidad de Santiago de Compostela
Villa A, Ares E (1988) In: Mital A (ed) Methodology to evaluate dispatching rules for a manufacturing line by discrete event dynamic model, vol 6. Elsevier, Amsterdam, pp 485–491. ISBN 0-4444-42929
Ares Gómez JE, Pérez Garcia JA, Peláez Lourido GC (1992) Diseño de Células en el Lay-Out de un Taller y Análisis del Flujo Multi-Etapa/Multi-Producto en Un Entorno CIM. In: X Congreso Nacional de Ingeniería Mecánica, Revista de la Asociación Española de Ingeniería Mecánica, Septiembre 1992
Ares E, Peláez G (1997) Integración de línea y célula flexibles en un modelo jerárquico para la planificación y programación de la producción. In: XII Congreso Nacional de Ingeniería Mecánica, Anales de Ingeniería Mecánica, Revista de la Asociación Española de Ingeniería Mecánica, Febrero 1997
Ares Gómez E, Ollero A, Arcostanzo M, Villa A (1987) Planificación de la producción en sistemas de fabricación en estaciones interconectadas en red. In: Anales de Ingeniería Mecánica, Revista de la Asociación Española de Ingeniería Mecánica, Diciembre 1987
Villa A, Fiorio G, Ares E (1987) In: Kusiak A (ed) Production planning and control in multi-stage multi-product systems. Elsevier, Amsterdam, pp 247–257. ISBN 0-444-70272-5
Villa A, Ares Gómez JE (1987) A methodology to analyze workshop lines by discrete event dynamic models. In: Mital A (ed), IXth International conference on production research, vol I, Cincinnati, pp 2072–2078
David Kelton W, Sadowski RP, Sturrock DT (2007) Simulation with arena, 4th edn. McGraw-Hill, New York. ISBN 978-0-07-110685-6
Takus DA, Profozich DM (1997) ARENA Software Tutorial. In: Proceedings of 1997 winter simulation conference, Atlanta, pp 541–544
Ferreira LP, Ares Gómez E, Peláez Lourido GC, Quintas JD, Tjahjono B (2011) Analysis and optimisation of a network of closed-loop automobile assembly line using simulation. Int J Adv Manuf Technol, Springer, 59:351–366
Ferreira LP, Ares Gómez E, Peláez Lourido G, Salgado M, Quintas JD (2011) Analysis on the influence of the number of pallets circulating on an automobile closed-loop assembly line. Int J Adv Eng Sci Technol 2(2):119–123
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Ferreira, L.P., Gómez, E.A., Lourido, G.P., Tjahjono, B. (2013). Modeling a Complex Production Line Using Virtual Cells. In: Ao, SI., Gelman, L. (eds) Electrical Engineering and Intelligent Systems. Lecture Notes in Electrical Engineering, vol 130. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-2317-1_30
Download citation
DOI: https://doi.org/10.1007/978-1-4614-2317-1_30
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-2316-4
Online ISBN: 978-1-4614-2317-1
eBook Packages: EngineeringEngineering (R0)