Abstract
Composite primary and secondary aircraft structures have the potential to achieve the same strength and stiffness as conventional metallic structures, but at substantially lower weight. To accomplish this in an efficient and effective manner the joints used to attach these composite structures will be critical. This work investigated the strain distribution in adhesively bonded and hybrid bolted/bonded composite single-strap butt joints using a 2D digital image correlation (DIC) technique and geometrically nonlinear finite element modelling. A high magnification optical setup was used to measure the strains in the through thickness direction, allowing strain measurements in the region of the adhesive and along the bondline in the joint overlap section. This provided a detailed measure of strain flow through the adhesive and into the doubler and adherend under a maximum tensile load of 5338 N (1200 lbf). In all cases a crack developed at the inner overlap section in the hybrid joints and, using DIC techniques, the size of the crack as well as crack tip strains could be determined from the deformed images. The information obtained from the DIC measurements proved valuable in helping to improve the fidelity of the finite element model.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Kweon, J.H., Jung, J.W., Kim, T.H., Choi, J.H., Kim, D.H., “Failure of carbon composite-to-aluminum joints with combined mechanical fastening adhesive bonding”, Composite Structures, Vol. 75, 2006, pp. 192-198.
Li, G., Chen, J., Alloggia, D., Yanishevsky, M., Benak, T., Moyes, B., and Kay, T., Study of static strength and failure behaviour of composite single-strap butt joints with different methods of attachment,” Institute for Aerospace Research, LTR-SMPL-2010-0136, National Research Council Canada, 2010.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer Science+Businees Media, LLC
About this paper
Cite this paper
Backman, D., Li, G., Sears, T. (2011). Determining the Strain Distribution in Bonded and Bolted/Bonded Composite Butt Joints Using the Digital Image Correlation Technique and Finite Element Methods. In: Proulx, T. (eds) Optical Measurements, Modeling, and Metrology, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-0228-2_48
Download citation
DOI: https://doi.org/10.1007/978-1-4614-0228-2_48
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-0227-5
Online ISBN: 978-1-4614-0228-2
eBook Packages: EngineeringEngineering (R0)