Abstract
During the past 20 years, numerous analytical models have been developed for second-order inelastic analysis of steel frames. In general, these models may be categorized into two main types: (1) plastic zone and (2) plastic hinge. The plastic-zone model follows explicitly the gradual spread of yielding throughout the volume of the structure. Plastification in the members is modeled by discretization of members into several beam-column elements and subdivision of the cross sections into many “fibers” [8.1–8.3]. The effects of residual stresses, geometric imperfections, and material strain hardening can all be accounted for in a plastic-zone analysis model. Because of the refined discretization of the members and their cross sections, the plastic-zone analysis can accurately predict the inelastic response of the structure, and it is generally considered an “exact” method of analysis. However, this type of analysis is too computationally intensive for general design use, and because of its complexity and cost, it has not yet found application in ordinary practice. Even if such analysis methods should become generally available and reliable, a more efficient procedure to assess the structural performance and failure modes of a system would be useful. Plastic-hinge-based methods of analysis hold the promise to fulfill these requirements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
ECCS, Ultimate Limit State Calculation of Sway Frames with Rigid Joints, Technical Committee 8, Structural Stability Technical Working Group 8.2, System, Publication No. 33, 20 pp., 1984.
White, D.W., Material and Geometric Nonlinear Analysis of Local Planar Behavior in Steel Frames Using Iterative Computer Graphics, M. S. thesis., Cornell University, Ithaca, NY, 281 pp., 1985.
Clarke, M.J., Bridge, R.Q., Hancock, G.J., and Trahair, N.S., “Benchmarking and Verification of Second-Order Elastic and Inelastic Frame Analysis Programs,” In TG 29 Workshop and Nomograph on Plastic Hinge Based Methods for Advanced Analysis and Design of Steel Frames, D.W. White and W.F. Chen, Editors, SSRC, Lehigh University, Bethlehem, PA, 1992.
Orbison, J.G., “Nonlinear Static Analysis of Three-Dimensional Steel Frames,” Report No. 82–6, Department of Structural Engrg., Cornell University, 243 pp., 1982.
Lui, E.M., Effect of Connection Flexibility and Panel Zone Deformation on the Behavior of Plane Steel Frames, Ph.D. dissertation, School of Civil Engrg., Purdue University, West Lafayette, IN, 1985.
Liew, J.Y.R., Advanced Analysis for Frame Design, Ph.D. dissertation, School of Civil Engineering, Purdue University, West Lafayette, IN, May, 393 pp., 1992.
American Institute of Steel Construction, Load and Resistance Factor Design Specification for Structural Steel Buildings, 2nd. ed., Chicago, December, 1993.
CSA, Limit States Design of Steel Structures,CAN/CSA-S16.-M89, Canadian Standards Association, 1989.
LeMessurier, W.J., “A Practical Method of Second Order Analysis, Part 2—Rigid Frames,” Engineering J., AISC, 14, 2, 49–67, 1977.
Yura, J.A., “The Effective Length of Columns in Unbraced Frames,” Engineering J., AISC, 8, 2, 37–42, 1971.
Stevens, L.K., “Elastic Stability of Practical Multistory Frames,” Proc. Inst. Civil Engrs., 36, London, UK, 1967.
Cheong-Siat-Moy, F., “Consideration of Secondary Effects in Frame Design,” J. Struct. Div., ASCE, 103, 10, 2005–2019, 1977.
Standards Australian, Steel Structures, Sydney, Australia, 1990.
EC 3, Design of Steel Structures: Part I—General Rules and Rules for Buildings, 1, Eurocode Edited draft, Issue 3, 1990.
Goto, Y., Suzuki, S., and Chen, W.F., “Bowing Effect on Elastic Stability of Frames Under Primary Bending Moments,” J. Struct. Engrg., ASCE, 117, 1, 111–127,1991.
Chen, W.F., and Lui, E.M., Structural Stability—Theory and Implementation, Elsevier Science Publication Co., New York, 490 pp., 1986.
Chen, W.F., and Lui, E.M., Stability Design of Steel Frames, CRC Press, 380 pp., 1992.
Cook, R.D., Malkus, D.S., and Plesha, M.E., Concepts and Applications of Finite Element Analysis, third ed., John Wiley & Sons, 630 pp., 1989.
Belytschko, T., and Hsieh, B.J., “Non-linear Transient Finite Element Analysis with Convected Coordinates,” Int. J. Num. Meth. Engrg., 7, 3, 255–271, 1973.
Powell, G.H., “Theory of Nonlinear Elastic Structures,” J. Struct. Div., ASCE, 95, ST12, 2687–2701, 1969.
Lui, E.M., and Chen, W.F., “Behavior of Braced and Unbraced Semi-Rigid Frames,” Int. J. Solids Struct., 24(9), 893–913, 1988.
Liew, J.Y.R., White, D.W., and Chen, W.F., “Beam-Column Design in Steel Frameworks—Insight on Current Methods and Trends,” J. Constructional Steel Research, 18, 269–308, 1991.
Liew, J.Y.R., White, D.W., and Chen, W.F., “Limit State Design of Semi-Rigid Frames Using Advanced Analysis: Part 2: Analysis and Design,” J. Constructional Steel Research, Vol. 26, No. 1, 1993, pp. 29–58.
Chen, W.F., and Atsuta, T., Theory of Beam-Column, 1, In-Plane Behavior and Design, MacGraw-Hill Int. Pub., 513 pp., 1976.
White, D.W., Liew, J.Y.R., and Chen, W.F., Second-Order Inelastic Analysis for Frame Design: A Report to SSRC Task Group 29 on Recent Research and the Perceived State-of-the-Art, Structural Engineering Report, CE-STR-91–12, Purdue University, 116 pp., 1991.
White, D.W., Liew, J.Y.R., and Chen, W.F., “Toward Advanced Analysis in LRFD”, In Workshop and Nomograph on Plastic Hinge Based Methods for Advanced Analysis and Design of Steel Frames, D.W. White and W.F. Chen, Editors, SSRC, Lehigh University, Bethlehem, PA, 1992.
Zhou, S.P., Duan, L., and Chen, W.F., “Comparison of Design Equations for Steel Beam-Columns”, Structural Engineering Review, 2(1), 45–53, 1990.
Kanchanalai, T., The Design and Behavior of Beam-Columns in Unbraced Steel Frames, AISI Project No. 189, Report No. 2, Civil Engineering/Structures Research Lab., University of Texas at Austin, 300 pp., 1977.
Liew, J.Y.R., White, D.W., and Chen, W.F., “Beam-Columns,” Constructional Steel Design, an international guide, Chapter 5.1, P.J. Dowling et al., editors, Elsevier Applied Science Publishers, England, 105–132, 1992.
Liew, J.Y.R., White, D.W., and Chen, W.F., “Second-Order Refined Plastic Hinge Analysis for Frame Design: Part 1,” J. Struct. Engrg., ASCE, Vol. 119, No. 11, 1993, pp. 3196–3216.
Liew, J.Y.R., White, D.W., and Chen, W.F., “Second-Order Refined Plastic Hinge Analysis for Frame Design: Part 2,” J. Struct. Engrg., ASCE, Vol. 119, No. 11, 1993, pp. 3217–3237.
Galambos, T.V., Editor, Guide to Stability Design Criteria for Metal Structures, Structural Stability Research Council, fourth edition, John Wiley & Sons, New York, 786 pp., 1988.
Vogel, U., “Calibrating Frames,” Stahlbau, 10, Oct., 295–301, 1985.
Ziemian, R.D., Advanced Methods of Inelastic Analysis in the Limit States Design of Steel Structures, Ph.D. dissertation, School of Civil and Environmental Engineering, Cornell University, Ithaca, NY, 265 pp., 1990.
Kishi, N., Chen, W.F., Goto, Y., and Matsuoka, K.G., “Design Aid of Semi-Rigid Connections for Frame Analysis,” Engineering Journal, AISC, Vol. 30, No. 3, 3rd Quarter, 1993, pp. 90–107.
Liew, J.Y.R., White, D.W., and Chen, W.F., “Limit State Design of Semi-Rigid Frames Using Advanced Analysis: Part 1: Connection Modeling and Classification,” J. Constructional Steel Research, Vol. 26, No. 1, 1993, pp. 1–28.
Liew, J.Y.R., and Chen, W.F., “Trend Toward Advanced Analysis,” Chapter 1 in Advanced Analysis of Steel Frames—Theory, Software and Applications, W.F. Chen and S. Toma, Editors, CRC Press, Boca Raton, Florida, 1994, pp. 1–45.
Hughes, T.J.R., The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Prentice-Hall, Inc., Englewood Cliffs, NJ, 803 pp., 1987.
ECCS, Essentials of Eurocode 3 Design Manual for Steel Structures in Building, ECCS-Advisory Committee 5, No. 65, 60 pp., 1991.
Rights and permissions
Copyright information
© 1995 Springer-Verlag New York Inc.
About this chapter
Cite this chapter
Liew, J.Y.R., Chen, W.F. (1995). Second-Order Plastic Hinge Analysis. In: Plastic Design and Second-Order Analysis of Steel Frames. Springer, New York, NY. https://doi.org/10.1007/978-1-4613-8428-1_8
Download citation
DOI: https://doi.org/10.1007/978-1-4613-8428-1_8
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4613-8430-4
Online ISBN: 978-1-4613-8428-1
eBook Packages: Springer Book Archive