Abstract
Stylus techniques were developed mainly to meet the need for quantitative assessment of the surfaces of manufactured components. The method received impetus because of the need for accurate methods of quality control during the war, in particular, because of the need for controlling the quality of surfaces of components manufactured by subcontractors. Since then, the uses of stylus techniques have increased manyfold. Reduction of the dimensional tolerances of parts has been achieved by improvements in manufacturing processes; this in turn has meant that the surface texture plays a more significant role in the determination of how well a component will behave when in operation. Exactly the same can be said for the functional importance of the roundness and straightness of parts. the necessity for accurate and fast methods of surface metrology incorporating the measurement of surface texture, out-of-roundness, etc. has long been apparent.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. E. Reason, The Measurement of Surface Texture, Modern Workshop Technology, Part 2, Macmillan, London (1970).
R. E. Reason, M. R. Hopkins, and R. I. Garrod, 1944 Report on the Measurement of surface finish by stylus methods. the Rank Organization (1963).
R. E. Reason, Le calcul automatique des criteres des profils de surfaces, Automatisme IX 5. 177–178 (1964).
J. E. Torjusen, On-line statistical analysis of surface roughness by means of a small digital computer, Institute for Maskinteknisk Fabrikkdrift og Vertoymaskiner Trondheim, Norway (1968).
D. Kinsey and D. G. Chetwynd, Some Aspects of the Application of Digital Computers to the On-line Measurement of Surface Metrology, Imeko, VI, Dresden (1973).
D. J. Whitehouse and R. E. Reason, The Equation of the Mean Line of Surface Texture Found by an Electric Wave Filter, Rank Taylor Hobson, Leicester, England (1965).
D. J. Whitehouse, Improved type of wavefilter for use in surface finish measurement, Proc. Inst. Mech. Engrs. (London) 182, Part 3K, 306–318 (1967-1968).
R. C. Spragg and D. J. Whitehouse, A new unified approach to surface metrology, Proc. Inst. Mech. Engrs. (London) 185, 47/71, 697–707 (1970-1971).
R. D. Butler and J. R. Pope, Surface roughness and lubrication in sheet metal working, Proc. Inst. Mech. Engrs. (London) 182, Part 3K, 162–170 (1967-1968).
J. F. Kahles and M. Field. Surface integrity—A new requirement for surfaces generated by material—Removal Methods, Proc. Inst. Mech. Engrs. (London) 182, Part 3K, 31–45 (1967-1968).
J. Peklenik, Investigation of the surface typology, C.I.R.P. Annals 15, No. 4, 381–385 (1967).
D. J. Whitehouse, Typology of manufactured surfaces, C.I.R.P. Annals 15, No. 4, 417–431 (1971).
T. Al-Salihi, Ph.D. Thesis, Univ. of Birmingham (1967).
M. Pesante, Determination of surface roughness typology by means of amplitude density curves, C.I.R.P. Annals 12, No. 2, 61–68 (1963).
N. O. Myers, Characterization of surface roughness, Wear 5, 182–189 (1962).
J. A. Greenwood and J. B. P. Williamson, Contact of nominally flat surfaces, Proc. Roy. Soc. (London) A295, 300–319 (1966).
R. E. Reason, Report on the measurement of roundness, Rank Precision Industries (1966).
R. J. King, M. J. Downs, P. B. Clapham, K. W. Raine, and S. P. Talim, A comparison of methods for accurate film thickness measurement, J. Phys. E. 5, 445–449 (1972).
D. J. Whitehouse, Modern methods of assessing the quality and function of surface texture, Soc. Manuf. Engrs. 1Q72–206(1972).
R. C. Spragg, Accurate calibration of surface texture and roundness measuring instruments, Proc. Inst. Mech. Engrs. (London) 182, Part 3K, 397–405 (1967-1968).
J. B. P. Williamson, Microtopography of surfaces, Proc. Inst. Mech. Engrs. (London) 182, Part 3K, 21–30 (1967-1968).
J. Jungles and D. J. Whitehouse, An investigation of the shape and dimensions of some diamond styli, J. Phys. E. 3, 437–440 (1970).
Application Report 26, Talystep in the laboratory, Rank Precision Industries (1968).
N. Gane and J. M. Cox, The micro-hardness of metals at very low loads, Phil. Mag. 22, 881–891 (1970).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1974 Plenum Press, New York
About this chapter
Cite this chapter
Whitehouse, D.J. (1974). Stylus Techniques. In: Kane, P.F., Larrabee, G.B. (eds) Characterization of Solid Surfaces. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-4490-2_4
Download citation
DOI: https://doi.org/10.1007/978-1-4613-4490-2_4
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-4492-6
Online ISBN: 978-1-4613-4490-2
eBook Packages: Springer Book Archive