Abstract
To obtain acceptable adhesion and durability of adhesive bonded structures, anodizing of aluminium alloys in chromic acid or phosphoric acid is commonly used in the aircraft industry. In order to find a non-destructive testing technique to inspect pretreated parts and to gain further understanding, we used some simple techniques to characterize surfaces. Using Transmission Electron Microscopy (TEM) as a tool to characterize surface morphology showed that porous oxides gave the best adhesion quality. The Surface Potential Difference (SPD) measurement was found to be very sensitive to adsorbed dipole layers on surfaces. Surface Impedance (Z) measurements were introduced for determination of the sealing quality of anodic oxides, but can also be used to characterize non-sealed oxide layers. On the basis of experimental data obtained, the effects of several variables in the anodizing process on SPD and Z measurements and TEM morphology are discussed. Also the effects of ageing of anodic oxides by dipping in ambient temperature water are shown.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
P.F.A. Bijlmer and R.J. Schliekelmann, SAMPE Quarterly 5, 13 (1973).
F. Keller, M.S. Hunter and D.L. Robinson, J. Electrochem. Soc. 100, 411 (1953).
H Ginsberg and K. Wefers, Metall. 17, 202 (1963).
A. Hartman, N.L.R. Report TN M. 2091 National Aerospace Laboratory the Netherlands, Amsterdam (1961).
P.F.A. Bijlmer, J. Adhesion 5, 319 (1973).
J.D. Venables, D.K. McNamara, J.M. Chen, T.S. Sun and R.L. Hopping, Appl. Surface Sci. 3, 88 (1979).
P.F.A. Bijlmer, Metal Finishing 70, 30 (April 1972).
A. Matting and K. Ulmer, Kautschuk und Gummi. Kunststoffe 16, 280, 387 (1963).
W. Thomson (Lord Kelvin), Phil. Mag. 5, 82 (1898).
P.F.A. Bijlmer in “Surface Contamination: Genesis, Detection and Control”, K.L. Mittal, Editor, Vo1.2, pp. 723–748, Plenum Press, New York, 1979.
C.E. Michelson, J. Electrochem. Soc. 115, 213 (1968).
A.T. Fromhold, Jr. and J. Kruger, J. Electrochem. Soc. 120, 722 (1973 ).
T. Smith and G. Lindberg, Surface Technol. 9, 1 (1979).
E.T. Englehart and D.J. George, Materials Protection 3, 24 (Nov. 1964).
H. Birtel and W. Leute, Aluminium 43, 93 (1967).
A. Ott, Aluminium 52, 491 (1976).
R.J. Schliekelmann, Non Destructive Testing 5, 79 (1972).
L.M. Rose, “The Application of Mathematical Modelling to Process Development and Design”, Applied Science Publishers Ltd., London, 1974.
O.L. Davies, “The Design and Analysis of Industrial Experiments”, Oliver and Boyd, London, 1967.
R. Leek and N.A. Hampson, Surface Technol. 7, 151 (1978).
J. Ross MacDonald and J.A. Garber, J. Electrochem. Soc. 124, 1022 (1977).
G.H. Golub and C. Reinsch in “Handbook for Automatic Computation, Vol. II: Linear Algebra”, J.H. Wilkinson and C. Reinsch, Editors, pp. 134–151, Springer Verlag, 1971.
K.S. Cole and R.H. Cole, J. Chem. Phys. 9, 341 (1941).
H.J. de Wit, C. Wijenberg and C. Crevecoeur, J. Electrochem. Soc. 126, 779 (1979).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1984 Plenum Press, New York
About this chapter
Cite this chapter
Kwakernaak, A., Exalto, R., van Hoof, H.A. (1984). Surface Characterization of Anodic Oxides on Aluminium Alloys by Means of Surface Potential Difference, Surface Impedance and Surface Morphology. In: Mittal, K.L. (eds) Adhesive Joints. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-2749-3_8
Download citation
DOI: https://doi.org/10.1007/978-1-4613-2749-3_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-9702-4
Online ISBN: 978-1-4613-2749-3
eBook Packages: Springer Book Archive