Abstract
A review is provided for the field of high modulus fibers. Emphasis is placed on research for the development of high tensile moduli from flexible chain polymers, with polyethylene used as an example. Advances in drawing techniques and in the characterization of draw are also reviewed. These developments with flexible chain polymers are compared to the recent U.S. advances in the achievement of high modulus fibers from the rigid rod polymers.
-
Recent Developments in High Modulus Polymers
-
Preparation and Characterization of Drawn Thermoplastics
-
Deformation of Low Density Polyethylenes
-
Deformation of High Density Polyethylene
-
Gas Permeation with CO2 as a Probe for Amorphous Orientation
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Section I Recent Developments in High Modulus Polymers
Polymer Science and Engineering: Challenges, Needs and Opportunities Report of the Ad Hoc Panel on Polymer Science and Engineering, National Research Council (1981).
Organic Polymer Characterization, NMAB 332, National Materials Advisory Board (1977).
Polymer Materials Basic Research Needs for Energy Applications, CONF-780643, U.S. Department of Energy (1978).
Workshop Proceedings: Morphology of Polyethylene and.CrossLinked Polyethylene, EPRI EL-2134-LD (1981).
Organic Matrix Structure Composites: Quality Assurance and Reproducibility, NMAB-365, National Materials Advisory Board (1981).
Materials for Lighweight Military Combat Vehicles, NMAB-396, National Materials Advisory Board (1982).
W. B. Black, “High Modulus/High Strength Organic Fibers,” Ann. Rev. Mater. Sci., 10, 311 (1980)
W. B. Black and J. Preston, Editors, High Modulus Wholly Aromatic Fibers, Marcel Dekker, NY (1973).
H. Blades, U.S. Patent 3,869,430, “High Modulus, High Tenacity Poly (p-Phenylene Terephthalamide) Fiber,” assigned to DuPont (1975).
T. E. Helminiak, “The Air Force Ordered Polymers Research Program: An Overview,” A.C.S. Org. Coat, and Plast. Preprints, 4, 475 (1979).
Section II Preparation and Characterization of Drawn Thermoplastics
P. B. Bowden and R. J. Young, J. Mater. Sci., 9, 2034 (1974).
D. M. Bigg, Polym. Eng. & Sci., 16, 725 (1976).
J. H. Southern and R. S. Porter, J. Appl. Polym. Sci., 14 3205 (1970).
N. E. Weeks and R. S. Porter, J. Polym. Sci., A2, 12, 635 (1974).
N. J. Capiati, S. Kojima, W. G. Perkins and R. S. Porter, J. Mater. Sci., 13, 334 (1977).
N. J. Capiati, S. Kojima, W. G. Perkins and R. S. Porter, J. Mater. Sci., 13, 334 (1977).
S. Kojima and R. S. Porter, J. Polym. Sci., A-2, 16, 1729 (1978).
W. G. Perkins, N. J. Capiati and R. S. Porter, Polym. Eng. & Sci., 16 (1976).
A. E. Zachariades, W. T. Mead and R. S. Porter, “Ultrahigh Modulus Polymers,” A. Ciferri and I. M. Ward, Editors, Applied Science, London, (1979).
S. Murayama, K. Imada and M. Takayanagi, International J. Polym. Mat., 2, 125 (1973).
S. Middleman, “Fundamentals of Polymer Processing,” McGraw-Hill, NY, (1977).
A. G. Kolbeck and D. R. Uhlmann, J. Polym. Sci., 15, 27 (1977).
T. Kanamoto, A. E. Zachariades and R. S. Porter, Polym. J., 11, 4, 307 (1977).
W. T. Mead, C. R. Desper and R. S. Porter, J. Polym. Sci., Polym. Phys. Ed., 17 859 (1979).
C. J. Farrell and A. Keller, J. Mater. Sci., 12., 966 (1977).
A. S. Gibson, G. R. Davies and I. M. Ward, Polymer, 19_, 683 (1978).
A. Peterlin, J. Mater. Sci., 6 490 (1971).
E. S. Clark and L. S. Scott, Polym. Eng. & Sci., 14, 682 (1974).
R. S. Porter, ACS Polym. Preprints, 122 (1971).
L. R. G. Treloar, Polymer, 1, 95 (1960).
I. Sakurad, T. Ito and K. Nakamura, J. Polym. Sci., C15, 75 (1966).
A. E. Zachariades, P. D. Griswold and R. S. Porter, Polym. Eng. & Sci., 18, 861 (1978).
A. E. Zachariades, T. Shimada, M. P. C. Watts and R. S. Porter, ACS Polymer Preprints, 20, 2 (1979).
T. Shimada, A. E. Zachariades, W. T. Mead and R. S. Porter, J. Crystal Growth, accepted.
W. T. Mead, T. Shimada, A. E. Zachariades and R. S. Porter, Macromolecules, 12, 473 (1979).
A. E. Zachariades and R. S. Porter, J. Appl. Polym. Sci., 24, 1371 (1979).
A. E. Zachariades, E. S. Sherman and R. S. Porter, J. Appl. Polym. Sci., 24, 2137 (1979).
M. P. C. Watts, unpublished results.
A. E. Zachariades, B. Appelt and R. S. Porter, ACS Polymer Preprints, 20, 2 (1979).
W. G. Perkins, Ph.D. Thesis, University of Massachusetts, (1978).
Y. Sakuma and L. Rebenfeld, J. Appl. Polym. Sci., 10, 637 (1966).
J. S. Wang, J. R. Knox and R. S. Porter, Polym. J., 10, 619 (1978).
Section III Deformation of Low Density Polyethylenes
H. Ulrich, “Introduction to Industrial Polymers,” Hanser, NY (1981).
A. Buckley and H. A. Long, Polym. Eng. Sci., 9, 115 (1969).
J. M. Alexander and P. J. H. Wormell, Annais. C.I.R.O., XVIV, 21 (1971).
N. Capiati, S. Kojima, W. Perkins and R. S. Porter, J. Mater. Sci., 12, 334 (1977).
W. T. Mead and R. S. Porter, J. Polym. Sci., Polym. Symp., 63, 289 (1978).
S. Kojima and R. S. Porter, J. Appl. Polym. Sci., Appl. Polym. Symp., 33, 129 (1978).
W. G. Perkins, N. J. Capiati and R. S. Porter, Polym. Eng. Sci., 16, 200 (1976).
H. H. Chuah, R. E. DeMicheli and R. S. Porter, J. Polym. Sci., Polym. Lett., 21, 791 (1982).
J. H. Southern, R. S. Porter and H. E. Blair, J. Polym. Sci., A-2, _10, 1135 (1972).
S. Kojima, C. R. Desper and R. S. Porter, J. Polym. Sci., Polym. Phys. Ed., 16, 1721 (1978).
A. E. Zachariades, W. T. Mead and R. S. Porter, “Ultra-High Modulus Polymers,” A. Ciferri and I. M. Ward, Editors, Applied Science, Essex, England (1979).
N. E. Weeks and R. S. Porter, J. Polym. Sci., Polym. Phys. Ed., 13, 2049 (1975).
J. H. Southern and R. S. Porter, J. Macromol. Sci.-Phys., B4, 541 (1970).
W. T. Mead and R. S. Porter, Intern. J. Polym. Mater., 7, 29 (1979).
J. H. Southern and R. S. Porter, J. Appl. Polym. Sci., 14 2305 (1970).
D. J. H. Saiidiford and A. H. Wilbourn, “Polyethylene,” A. Renfrew and P. Morgan, Editors, Iliffe and Sons, London (1960).
R. J. Farris, M. S. Thesis, University of Utah (1969).
G. L. Wilkes, J. Macromol. Sci. Chem., C1O, 149 (1974).
G. Cappaccio, A. G. Gibson and I. M. Ward, “Ultra High Modulus Polymers,” A. Ciferri and I. M. Ward, Editors, Applied Science, Essex, England (1979).
M. Takayanagi, “Deformation and Fracture of High Polymers,” H. H. Kausch, J. A. Hassell and R. I. Jaffee, Editors, Plenum Press (1972).
P. S. Hope and B. Parsons, Polym. Eng. Sci., 20, 597 (1980).
P. S. Hope and B. Parsons, Polym. Eng. Sci., 20, 589 (1980).
R. S. Porter, “Exploring the Limits of Polymer Properties: Preparation Methods and Evaluation,” NSF proposal.
F. DeCandia, R. Russo, V. Vittoria and A. Peterlin, J. Polym. Sci., Polym. Phys. Ed., 20, 1175 (1982).
R. S. Porter, personal communication.
A. Tsuruta, T. Kanamoto, K. Tanoka and R. S. Porter, unpublished.
J. Shultz, “Polymer Materials Science,” p. 210, Prentice-Hall, NJ (1974).
J. Brandrup and E. H. Immergut, “Polymer Handbook,” p. VI 4H, Interscience Publishers, NY (1967).
F. DeCandia, R. Russo, V. Vittoria and A. Peterlin, J. Polym. Sci., Polym. Phys. Ed., 20, 269 (1982).
W. Glenz, N. Morosoff and A. Peterlin, J. Polym. Sci., Polym. Lett., 9, 211 (1971).
P. Meares, “Polymers: Structure and Bulk Properties,” Chapter 5, Van Nostrand Reinhold, London (1965).
S. M. Aharoni and J. P. Sibilia, J. Appl. Polym. Sci., 23, 133 (1979).
P. S. Hope, A. G. Gibson and I. M. Ward, J. Polym. Sci., Polym. Phys. Ed., 18, 1243 (1980).
J. Clements, G. Capaccio and I. M. Ward, J. Polym. Sci., Polym. Phys. Ed., 7 693 (1979).
W. T. Mead and R. S. Porter, J. Appl. Phys., 47, 4278 (1976).
D. P. Pope, J. Polym. Sci., Polym. Phys. Ed., 14, 811 (1976).
L. Koski, J. Thermal Anal., 13, 467 (1978).
J. P. Bell and J. H. Dumbleton, J. Polym. Sci., A-2, 7 1033 (1969).
G. E. Sweet and J. P. Bell, J. Polym. Sci., A-2, 10, 1273 (1972).
F. DeCandia, R. Russo, V. Vittoria and A. Peterlin, J. Polym. Sci., Polym. Phys. Ed., 20, 269 (1982).
F. DeCandia, A. Perullo, V. Vittoria and A. Peterlin, J. Appl. Polym. Sci., 28, 1815 (1983).
I. M. Ward, “Mechanical Properties of Solid Polymers,” Chapter 10, Wiley, London (1971).
V. B. Gupta, A. Keller and I. M. Ward, J. Macromol. Sci., Phys.- B2, 139 (1968).
D. W. Hadley, P. R. Pinnock and I. M. Ward, J. Mater. Sci., 4, 152 (1969).
F. C. Frank, V. B. Gupta and I. M. Ward, Phil. Mag., 21, 1127 (1970).
V. B. Gupta and I. M. Ward, J. Macromol. Sci.-Phys., B2, 89 (1968).
V. B. Gupta and I. M. Ward, J. Macromol. Sci.-Phys., B1, 373 (1967).
I. M. Ward, J. Polym. Sci., Polym. Symp., 58, 1 (1977).
S. Hoshino, J. Powers, D. G. Legrand, H. Kawai and R. S. Stein J. Polym. Sci., 58, 185 (1962).
R. S. Stein and F. H. Norris, J. Polym. Sci., 21, 381 (1956).
Section IV Deformation of High Density Polyethlene
A. Cifferi and I. M. Ward, “Ultra-High Modulus Polymers,” Appl Sci. Publ., London, (1979).
A. E. Zachariades and R. S. Porter, Editors, “Strength and Stiffness of Polymers,” Plastic Engineering Series, Vol. 4, Marcel Dekker, (1983).
T. Kanamoto and K. Tanaka, Plastics, 34, 10, 25 (1983).
A. Peterlin, Polym. Eng. Sci., 18, 488 (1978), and A. Peterlin J. Mater. Sci., 6, 490 (1971).
A. G. Gibson and I. M. Ward, Polymer, 19, 683 (1978).
M. Takayanagi, K. Imada and T. Kajiyama, J. Polym. Sci., Part C, 15, 263 (1966).
D.S. Prevorsek, P. J. Harget, R. K. Sharma and A. C. Reimschuessel, J. Macromol. Sci., B-8, 127 (1973).
T. Kanamoto, S. Fujimatsu, A. Tsuruta, K. Tanaka and R. S. Porter, Repts. Progr. Polym. Phys., Japan, 24, 185 (1981).
E. S. Sherman, R. S. Porter and E. L. Thomas, Polymer, 23, 1069 (1982).
N. E. Weeks, S. Mori and R. S. Porter, J. Polym. Sci., Polym. Phys. Ed., 13, 2031 (1975).
G. Capaccio and I. M. Ward, J. Polym. Sci., Polym. Phys. Ed., 19, 667 (1981).
R. G. Snyder and J. R. Scherer, J. Polym. Sci., Polym. Phys. Ed., 18, 421 (1980).
Y. K. Wang, D. A. Waldman, R. S. Stein and S. L. Hsu, J. Appl. Phys., 53, 6591 (1982).
A. Tsuruta, T. Kanamoto, K. Tanaka and R. S. Porter, Polym. Eng. Sci., 23, 521 (1983).
T. Kanamoto, A. Tsuruta, K. Tanaka, M. Takeda and R. S. Porter Polym. J., 15, 327 (1983).
P. D. Griswold, A. E. Zachariades and R. S. Porter, Polym. Eng Sci., 18, 861 (1981).
M. Ito, T. Kanamoto, K. Tanaka and R. S. Porter, Macro-molecules, 14, 1779 (1981)
L. Fischer, R. Haschberger, A. Ziegeldorf and W. Ruland, Colloid Polym. Sci., 260, 174 (1982).
Section V Gas Permeation with CO2 as a Probe for Amorphous Orientation
C., Choy, Polymer, 18, 984 (1977).
L. H. Wang, C. L. Choy and R. S. Porter, J. Polym. Sci., A-2, 20, 633 (1982).
N. E. Droili and C. Migliaresi, J. Appl. Polym. Sci., 19, 1999 (1975).
W. Vieth and W. F. Wuergh, J. Appl. Polym. Sci., 13, 1164 (1959).
M. H. Cohen and D. Turnbull, J. Chem. Phys., 3l, 1164 (1959).
N. Kurosa, San-I Gakkaishi, 35 (10), T-413 (1979).
W. J. Koros and D. R. Paul, J. Polym. Sci., A-2, 16, 2171 (1978).
S. W. Lasoski, Jr., and W. H. Cobbs, J. Polym. Sci., 36, 21 (1959).
G. Levita and T. L. Smith, Polym. Eng. Sci., 21, 936 (1981).
T. L. Smith, W. O. Oppermann, A. H. Chan and G. Levita, Amer. Chem. Soc., Polym. Preprints, 24 (1), 83 (1983).
P. D. Griswold, A. E. Zachariades and R. S. Porter, in “Flow Induced Crystallization in Polymer Systems,” R. L. Miller, Editor, Gordon and Breach, NY, pp. 205–211 (1979).
A. E. Zachariades, E. S. Sherman and R. S. Porter, J. Appl. Polym. Sci., 24, 2137 (1979).
A. E. Zachariades, E. S. Sherman and R. S. Porter, J. Polym. Sci., Polym. Letters Ed., 17, 255 (1979).
B. Appelt, L. H. Wang and R. S. Porter, J..Mater. Sci., 16 763 (1981).
T. L. Caskey, Modern Plast., 45 (4), 148 (1976).
J. Brandrup and E. H. Immergut, “Polymer Handbook,” John Wiley & Son, NY, (1975).
R. S. Stein, J. Appl. Phys., 32, 1280 (1961).
M. F. Milagin, A. D. Gabarayvea and J. T. Shishkin, Polym. Sci. USSR, A12, 577 (1970).
B. Jasse and J. L. Koenig, J. Polym. Sci., Polym. Phys. Ed., 17, 799 (1979).
G. Hadziioannou, L. H. Wang, R. S. Stein and R. S. Porter, Macromolecules, 15, 880 (1981).
A. E. Zachariades, W. T. Mead and R. S. Porter, Chem. Rev., 80, 351 (1980).
H. H. Chuah, R. E. DeMicheli and R. S. Porter, J. Polym. Sci., Polym. Letters Ed., accepted (1983).
A. S. Michaels, W. R. Vieth and H. J. Bixler, J. Appi. Polym. Sci., 3, 2735 (1964).
A. S. Michaels and R. E. Parker, Jr., J. Polym. Sci., 41, 53 (1959).
A. S. Michaels and H. J. Bixler, ibid, 50, 413 (1961)
H. Yasuda and A. Peterlin, J. Appi. Polym. Sci., 18, 531 (1974).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1986 Plenum Press, New York
About this chapter
Cite this chapter
Porter, R.S. (1986). High Modulus Polymers from Flexible Chain Thermoplastics. In: McCauley, J.W., Weiss, V. (eds) Materials Characterization for Systems Performance and Reliability. Sagamore Army Materials Research Conference Proceedings, vol 26. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-2119-4_5
Download citation
DOI: https://doi.org/10.1007/978-1-4613-2119-4_5
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4612-9253-1
Online ISBN: 978-1-4613-2119-4
eBook Packages: Springer Book Archive