Abstract
Pulsed high irradiance laser induced shock waves are being used for assessing the dynamic fracture behavior of materials at extreme conditions. Theories [1, 2] have long predicted that very strong shock waves in the kbar-Mbar regime could be produced in small samples with pulsed lasers. Recent experiments have shown that this idea is not only a theoretical possibility, but also a practical way to obtain pressures and strain rates previously unachievable in a laboratory environment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Trainor, R.J. and Lee, Y.T. Analytic models for design of laser generated shock-wave experiments Phys. Fluids 25, 1898–1907 (1982).
Larson, A.R. Calculation of laser induced spall in aluminum targets, Los Alamos Lab. Report No. LA-5619-MS (1974).
Eliezer, S., Loeb, A., Zigler, A., Arad, B., Ludmirsky, A., Gazit, Y., Jackel, S., Salzmann, D., Krumbein, A.D., Borowitz, J.L., Paiss, Y., Gilath, I., Szichman, H., and Givon, M. The evolution of strong shock waves produced by a trapezoidal laser pulse, in Laser Interaction and Related Plasma Phenomena, Edited by H. Hora and G. Miley (Plenum, New York), Vol. 7, pp. 279–288 (1986).
Loeb, A. and Eliezer, S. An analytical model for creation and decay of strong shock waves caused by a trapezoidal laser pulse, Phys. Fluids 28, 1196–1201 (1985).
Arad, B., Borowitz, A., Eliezer, S., Gazit, Y., Gilath, I., Givon, M., Jackel, S., Krumbein, A.D., and Szichman, H. Measurement of shock waves generated by a trapezoidal laser pulse, Plasma Phys. Controlled Fusion 26, 845–852 (1984).
Key, M.H. The physics of the superdense region. In Laser-Plasma Interaction, edited by R.A. Cairns and J.J. Sanderson, Publ. SUSSP, p. 219 (1980).
Boustie, M., Cottet, F., and Chauveau, Y. Spalling of aluminum and copper targets by laser shocks p. 741, in Shock-wave and high strain rate phenomena in materials, edited by M.A. Meyers, L.E. Murr, and K.P. Standhammer, Marcel Dekker, New York, 1992.
Harrach, R.J., Lee, Y.T., Trainor, P.J., Holmes, N.C., Rosen, M.D., Banner, D.L., and Olness, R.J. Livermore National Lab. (U.S.A.) preprint UCRL— 86301, 1981.
Thompson, P.C. and Roberts, P.D. Laser Particle Beams, 2, 13 (1984).
Bauer, F. Metrologie d’ondes de choc a l’aide de polymers piezoelectriques. J. Physique IV, C3, 427–433 (1991).
Paisley, D.L. Laser driven miniature plates for one-dimensional impacts at 0.5-≥6 km/5, p. 1131–1141. In Shock wave and high strain rate phenomena in materials, edited by M.A. Mayers, L.E. Murr, and K.P. Standhammer, Marcel Dekker, New York, 1992.
Fabbro, R. Physical study of laser produced plasma in confined geometry, J. Appl Phys. 68, 783–784 (1990).
Christiansen, J.P., Ashby, D.E., and Roberts, K.V., Comp. Phys. Commun. 7, 271 (1974).
Eliezer, S., Gilath, I., and Bar-Noy, T. Laser induced spall in metals, Experiment and simulation, J. Appl. Phys. 67, 715–724 (1990).
Fortov, V.E., Kostin, V.V., and Eliezer, S. Spallation of metals under laser irradiation, J. Appl. Phys. 70, 4524–4531 (1991).
Cottet, F., Ng, A., Da Silva, L., and Marty, L. Spallation under the action of a laser induced shock wave, J. Physique, 49, C3, 419–424 (1988).
Tuler, F.R., and Butcher, B.M. Int. J. Fracture Mechan. 6, 431 (1968).
Gilath, I., Salzman, D., Givon, M., Dariel, M.P., Kornblith, L., and Bar-Noy, T. Spallation as an effect of laser induced shock waves, J. Mat. Sci. 23, 1825–1828 (1988).
Gilath, I., Eliezer, S., Dariel, M.P., and Kornblith, L. Total elongation at fracture at ultra-high strain rates, J. Mat. Sci. Lett. 7, 915–917 (1988).
Gilath, I., Eliezer, S., Dariel, M.P., Kornblith, L., and Bar-Noy, T. Laser induced spall in aluminum and copper, J. Physiques C3, 49, 191–197 (1988).
Gilath, I., Eliezer, S., Dariel, M.P., and Kornblith, L. Brittle-to-ductile transition in laser-induced spall at ultra high strain rate in the 6061-T6 aluminum alloy, Appl. Phys. Lett 52, 1207–1209 (1988).
Salzmann, D., Gilath, I., Givon, M., and Bar Noy, T. Measurement of the tensile strength of aluminum at a strain rate of 2 × 107 s-1, J. Phys. D., Appl. Phys. 22, 1271–1274(1989).
Salzman, D., Gilath, I., and Arad, B. Experimental measurements of the conditions for the planarity of laser-driven shock waves, Appl. Phys. Lett. 52, 1128–1129(1988).
Gilath, I., Eliezer, S., and Bar-Noy, T. Hemispherical shock wave decay in laser matter interaction. Laser Particle Beams. In press.
Zukas, A., Nichols, T., Swift, H.F., Gresczuk, L.B., and Curran, D.R. Impact Dynamics John Wiley, New York, 1982.
Eliezer, S., Gazit, Y., and Gilath, I. Shock wave decay and spall strength in laser-matter interaction, J. Appl. Phys. 68, 356–358 (1990).
Grady, D.E. Spall strength of condensed matter. J. Mech. Phys. Solids 36, 353–384 (1988).
Gilath, I., Eliezer, S., and Shkolnik, S. Spall behavior of carbon epoxy unidirectional composites as compared to aluminum and iron, J. Compos. Mat. 24, 1138–1151(1990).
Gilath, I., Eliezer, S., and Weisshaus, H. Damage in 2D Carbon-Carbon Composites by short pulsed laser induced shock waves. J. Reinforced Plastics Composites 8, 259–269 (1989).
Gilath, I., Eliezer, S., and Gazit, Y. Fracture modes in alumina at hypervelocity impact conditions, J. Mat. Sci. 26, 2023–2025, (1991).
Gilath I., Eliezer, S., Gazit, Y., and Barnea, N. Low and high strain rate experiments on model Kevlar-Epoxy microcomposites, J. Reinforced Plastics Composites 10, 84–90 (1991).
Gilath, I., Englman, R., Jaeger, Z., Buchman, A., and Dodiuk, H. Impact resistance of adhesive joints using laser induced shock waves, Int. J. Adhesion Adhesives. In press.
Hill, D.C., Stevenson, T.J., and Zarnechi, J.C. Application of laser simulation of hypervelocity impacts to space particulate damage to metals and optical glasses. In: Proceedings of the fourth Intern Conf. on Spacecraft materials in space environment, Toulouse, France, 1988.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Springer-Verlag New York, Inc.
About this chapter
Cite this chapter
Gilath, I. (1996). Laser-Induced Spallation and Dynamic Fracture at Ultra High Strain Rate. In: Davison, L., Grady, D.E., Shahinpoor, M. (eds) High-Pressure Shock Compression of Solids II. High-Pressure Shock Compression of Condensed Matter. Springer, New York, NY. https://doi.org/10.1007/978-1-4612-2320-7_4
Download citation
DOI: https://doi.org/10.1007/978-1-4612-2320-7_4
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4612-7501-5
Online ISBN: 978-1-4612-2320-7
eBook Packages: Springer Book Archive