Abstract
A growing number of industrial activities demands advanced materials that satisfy stringent requirements and lower costs. These requirements, which involve a combination of many properties, can often be satisfied by using a composite material, whose constituents act synergically to solve the needs of application. Modelling the behavior of such a heterogeneous material during its production is a very hard task, but it is very useful for the optimization of the manufacturing process itself. This chapter focuses on the deduction of mathematical models of deformable porous media and on their application to composite materials manufacturing as a first step toward the understanding of this complex process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Al-Hamdan, A., Rudd, C. D., and Long, A. C., Dynamic core movements during liquid moulding of sandwich structures, Composites A, 29 (1998), 273–282.
Allaire, G., Homogenization of the Stokes flow in a connected porous medium, Asymptotic Anal., 2 (1989), 203–222.
Ambrosi, D., and Preziosi, L., Modelling matrix injection through elastic porous preforms, Composites A, 29 (1998), 5–18.
Ambrosi, D., and Preziosi, L., Modelling injection moulding processes with deformable porous preform, SIAM J. Appl. Math., submitted.
Antonelli, D., and Farina, A., Injection moulding: Modelling and numerical simulations, Composites A, submitted.
Atkin, R. J., and Craine, R. E., Continuum theories of mixtures: basic theory and historical development, Q. J. Mech. Appl. Math., 29 (1976), 209–244.
Atkin, R. J., and Craine, R. E., Continuum theories of mixtures: applications, J. Inst. Math. Appl., 17 (1976), 153–207.
Baranger, J., and Mikelic, A., Stationary solutions to a quasi-Newtonian flow with viscous heating, Math. Models Methods Appl. Sci., 5 (1995), 725–738.
Barker, M. K., and Seedhom, B. B., Articular cartilage deformation under physiological cycling loading, J. Biomech., 377–381(1997).
Bear, J., and Bachmat, Y., Introduction to Modelling of Transport Phenomena in Porous Media, Kluwer (1990).
Beavers, G. S., and Joseph, D. D., Boundary conditions at a naturally permeable wall, J. Fluid Mech., 30 (1967), 197–207.
Beavers, G. S., Wilson, T. A., and Masha, B. A., Flow through a deformable porous material, Trans. ASME E: J. Appl. Mech., 42 (1975), 598–602.
Beavers, G. S., Wittemberg, K., and Saprrow, E. M., Fluid flow through a class of highly-deformable porous media. II. Experiments with water, J. Fluids Eng., 103 (1981), 440–444.
Bedford, A., and Drumheller, D. S., Theory of immiscible and structured mixtures, Int. J. Eng. Sci., 21 (1983), 863–960.
Bellomo, N., and Preziosi, L., Modelling Mathematical Methods and Scientific Computation, CRC Press (1995).
Bickerton, S., and Advani, S. G., Experimental investigation and flow visualization of the resin-transfer mold-filling process in a non-planar geometry, Compos. Sei. Tech., 57 (1997), 23–33.
Billi, L., and Farina, A., Unidirectional infiltration in deformable porous media: Mathematical modelling and self-similar solution, Quart. Appl. Math., in press.
Blavier, E., and Mikelic, A., On the stationary quasi-Newtonian flow through porous medium, Math. Methods Appl. Sci., 18 (1995), 927–948.
de Boer, R., Highlights in the historical development of the porous media theory: Toward a consistent macroscopic theory, Appl. Mech. Rev., 49 (1996), 201–262.
Bowen, R. M., Theory of mixtures, in Continuum Physics, Vol. 3, Eringen A. C., ed., Academic Press (1976).
Bowen, R. M., A theory of constrained mixtures with multiple temperatures, Arch. Rat. Mech. Anal., 70 (1979), 235–260.
Bowen, R. M., Incompressible porous media model by use of the theory of mixtures, Int. J. Eng. Sci., 18 (1980), 1129–1148.
Bruschke, M. V., and Advani, S. G., A numerical approach to model non-isothermal viscous flow through fibrous media with free surfaces, Int. J. Numer. Methods Fluids, 19 (1994), 575–603.
Calado, V. M. A., and Advani, S. G., Effective average permeability of multi-layer preforms in resin transfer molding, Compos. Sci. Tech., 56, 519–531 (1996).
Calhoun, D. R., Yalvaç, S., Wetters, D. G., Wu, C. H., Wang, T. J., Tsai, J. S., and Lee, L. J., Mold filling analysis in resin transfer molding, Polymer Compos., 17 (1996), 251–264.
Canuto, C., Hussaini, M. Y., Quarteroni, A., and Zang, T. A., Spectral Methods in Fluid Dynamics, Springer-Verlag (1988).
Challal, S., and Saint Jean Paulin, J., Study of the limit behavior of a viscoelastic medium with very small obstacles, Math. Models Methods Appl. Sci., 6 (1996), 227–244.
Chui, W. K., Glimm, J., Tangerman, F. M., Jardine, A. P., Madsen, J. S., Donnellan, T. M., and Leek, R., Process modeling in resin transfer molding as a method to enhance product quality, SIAM Rev., 39 (1997), 714–727.
Clyne, T. W., and Mason, J. F., The squeeze infiltration process for fabrication of metal matrix composites, Metall. Trans. A, 18 (1987), 1519–1530.
Couniot, A., Carlier, Th., Valembois, D., Ma1, O., and Dupret, F., Modeling and numerical simulation of the structural reaction injection moulding (SRIM) process, in Proceedings of the Third International Conference on Flow Processes in Composite Materials, University College Galway, Ireland, 7-9 July 1994.
Dai, F., Rajagopal, K.R., Diffusion of fluids through transversely isotropic solids, Acta Mech., 82 (1990), 61–98.
Darcy, H., Les Fontaines Publiques de la Ville de Dijon, Dalmont (1856).
Dusi, M. R., Lee, W. L., Ciriscioli, P. R., and Springer, G. S., Cure kinetics and viscosity of fiberite 976 resin, J. Composite Mater., 21 (1987), 234–261.
Ene, H. L., On a thermodynamic theory of mixtures, Int. J. Eng. Sci., 19 (1981), 905–915.
Ene, H. L., and Polisevski, D., Thermal Flow in Porous Media, Reidel (1987).
Ene, H. L., and Saint Jean Paulin, J., Homogenization and two-scale convergence for a Stokes or Navier-Stokes flow in an elastic thin porous medium, Math. Models Methods Appl. Sci., 6 (1996), 941–955.
Ene, H. I., and Sanchez-Palencia, E., Some thermal problems in flow through a periodic model of porous media, Int. J. Eng. Sci., 19 (1981), 117–127.
Ene, H. I., and Sanchez-Palencia, E., On thermal equation for flow in porous media, Int. J. Eng. Sci., 20 (1982), 623–630.
Farina, A., Modelling and Simulations of Fluid Dynamic Problems in Composite Materials Manufacturing, Ph.D. Thesis, Politecnico di Torino (1998).
Farina, A., and Preziosi, L., Free boundary problems in the production of composites, in Proceedings of the Conference Free Boundary Problems 97, Heraklion (Crete), June 1997, in press.
Farina, A., and Preziosi, L., Non-isothermal injection moulding with resin cure and preform deformability, Eur. J. Mech. B/Fluids, submitted.
Farina, A., and Preziosi, L., Infiltration processes in composite materials manufacturing: Modelling and qualitative results, in Complex Flows in Industrial Processes, Fasano A., ed., Birkhäuser (1999), in press.
Frijns A. J. H., Huyghe J. M., and Janssen, J. D., A validation of the quadriphasic mixture thory for intervertebral disc tissue, Int. J. Eng. Sci., 35 (1997), 1419–1429.
Gandhi, M., Rajagopal, K. R., and Wineman, A. S., Some non-linear diffusion problems within the context of interacting continua, Int. J. Eng. Sci., 25 (1987), 1441–1457.
Gandhi, M., Usman, M., Wineman, A. S., and Rajagopal, K. R., Combined extension and torsion of a swollen cylinder within the context of mixture theory, Acta Mech., 79 (1989), 81–95.
Gawin, D., Baggio, P., and Schrefler, B. A., Coupled heat, water and gas flow in deformable porous media, Int. J. Numer. Methods Fluids, 20 (1995), 969–987.
Gonzales-Romero, V. M., and Macosko, C. W., Process parameters estimation for structural reaction injection moulding and resin transfer moulding, Polymer Eng. Sci., 30 (1990), 142–146.
Guild, F. J., and Summerscales, J., Microstructural image analysis applied to fiber composite materials: A review, Composites, 24 (1993), 383–393.
Gutowski, T. G., A resin flow/fiber deformation model for composites, SAMPE Q., 16 (1985), 58–64.
Gutowski, T. G., Morigaki, T., and Cai, Z., The consolidation of laminate composites, J. Composite Mater., 21 (1987), 172–188.
Hammami, A., Gauvin, R., and Trochu, F., Modeling the edge effect in liquid composites molding, Composites A, 29 (1998), 603–609.
Han, K., Lee, L. J., and Liu, M. J., Fiber mat deformation in liquid composite moulding. II. Modeling, Polymer Compos., 14 (1993), 151–160.
Han, K., Trevino, L., Lee, L. J., and Liu, M. J., Fiber mat deformation in liquid composite moulding. I. Experimental analysis, Polymer Compos., 14 (1993), 144–150.
Hou, J. S., Holmes, M. H., Lai, W. M., and Mow, V. C., Boundary conditions at the cartilage-synovial fluid interface for joint lubrication and theoretical verifications, J. Biomech. Eng., 111 (1989) 78–87.
Hornung, U., Homogenization and Porous Media, Springer (1997).
Isayev, A. I., Injection and Compression Moulding Fundamentals, Marcel Dekker (1987).
Jäger, W., and Mikelic, A., On the boundary conditions at the contact interface between a porous medium and a free fluid, Annali della Scuola Normale Superiore di Pisa, Serie VI, 23 (1996), 403–465.
Jayaraman, G., Water transport in the arterial wall. A theoretical study, J. Biomech., 16 (1983), 833–840.
Joseph, D. D., and Lundgren, T., Ensemble average and mixture theory for incompressible fluid-particle suspensions, Int. J. Multiphase Flow, 16 (1990), 35–42.
Kamal, M. R., and Sourour, S., Kinetics and thermal characterization of thermoset cure, Polymer Eng. Sci., 13 (1973), 59–64.
Keller, J. B., Darcy’s law for flow in porous media and two-space method, in Nonlinear Partial Differential Equations in Engineering and Applied Sciences, Sternberg, R. L., ed., Dekker (1980).
Kendall, N. K., and Rudd, C. D., Flow and cure phenomena in liquid composite molding, Polymer Compos., 15 (1994), 334–348.
Kenyon, D. E., Thermostatics of solid-fluid mixtures, Arch. Rat. Mech. Anal., 62 (1976), 117–129.
Kenyon, D. E., The theory of an incompressible solid-fluid mixture, Arch. Rat. Mech. Anal, 62, 131–147 (1976).
Kenyon, D. E., A mathematical model of water flux through aortic tissue, Bull. Math. Biol., 41, 79–90 (1979).
Kim, Y. R., McCarthy, S. P., and Fanucci, J. P., Compressibility and relaxation of fiber reinforcements during composite processing, Polymer Compos., 12 (1991), 13–19.
Klanchar, M., and Tarbell, J. M., Modelling water flow through arterial tissue, Bull. Math. Biol., 49 (1987), 651–661.
Lancellotta, R., Geotechnical Engineering, Balkema (1995).
Lee, W.I., Loos, A.C., Springer, G.S., Heat reaction, degree of cure and viscosity of Hercules 3501-6 resin, J. Composite Mater., 16, 510–520 (1982).
Lekakou, C., and Bader, M. G., Mathematical modelling of resin infiltration in resin transfer moulding (RTM), Proceedings of the Fourth International Conference on Flow Processes in Composite Materials, University of Wales Aberystwyth, UK, 9-11 September 1996.
Lekakou, C., Johari, M. A. K. B., and Bader, M. G., Compressibility and flow permeability of two dimensional woven reinforcements in the processing of composites, Polymer Compos., 17 (1996), 666–672.
Lewis, R. W., and Schrefler, B. A., The Finite Element Method in the Deformation and Consolidation of Porous Media, Wiley (1987).
Lin, M., Hahn, H. T., and Huh, H., A finite element simulation of resin transfer molding based on partial nodal saturation and implicit time integration, Composites A, 29 (1998), 541–550.
Lin, R. J., Lee, L. J., and Liou, M. J., Non-isothermal mold filling and curing simulation in thin cavities with preplaced fiber mats, Int. Polymer Process., 6 (1991), 356–369.
Lin, R. J., Lee, L. J., and Liou, M. J., Mold filling and curing analysis in liquid composite molding, Polymer Compos., 14 (1993), 71–81.
Lions, J. L., Some Methods in the Mathematical Analysis of Systems and their Control, Science Press (1981).
Lipton, R., and Avellaneda, A., A Darcy law for slow viscous flow past a stationary array of bubbles, Proc. Roy. Soc. Edinb. A, 114 (1990), 71–79.
Lipton, R., Vernescu, B., Variational methods, size effects and extremal microgeometries for elastic composites with impefect interface, Math. Models Methods Appl. Sci., 5, 1139–1173 (1995).
Liu, B., Bickerton, S., and Advani, S. G., Modelling and simulation of resin transfer moulding (RTM)-gate control, venting and dry spot prediction, Composites A, 27, 135–141 (1996).
Liu, I.S., On chemical potential and incompressible porous media, J. Mec. 19, 327–342 (1980).
Long, S., Zhang, Z., Flower, H.M., Hydrodynamics analysis of liquid infiltration of unidirectional fiber arrays by squeeze casting, Acta Metall. Mater., 42, 1389–1397 (1994).
Long, S., Zhang, Z., Flower, H.M., Characterization of liquid metal infiltration of a chopped fiber preform aided by external pressure. II. Modelling of liquid metal infiltration process, Acta Metall. Mater., 43, 3499–3509 (1995).
Macosko, C. W., Fundamentals of Reaction Injection Moulding, Hanser (1989).
Mai, O., Couniot, A., Dupret, F., Non-isothermal simulation of the structural reaction injection moulding process, in Proceedings of the Fourth International Conference on Flow Processes in Composite Materials, University of Wales Aberystwyth, UK, 9-11 September 1996.
Mallik, P. K., Fiber-Reinforced Composites: Materials Manufacturing and Design, Marcel Dekker (1988).
Marusic, S., Low concentration for a fluid flow through a filter, Math. Models Methods Appl. Sci., 8, 623–643 (1998).
Mikelic, A., and Primicerio, M., Homogenization of heat conduction in materials with periodic inclusions of perfect conductor, in Progress in PDE’s, Calculus of Variations and Applications, Pitman Res. Notes in Math. 267, Chipot, M. et al., eds., Pitman (1992).
Mikelic, A., and Primicerio, M., Homogenization of the heat equation for a domain with a network of pipes with a well mixed fluid, Ann. Mat. Pura Appl. (IV), CLXVI (1994), 227–251.
Mortensen, A., and Cornie, J. A., On the infiltration of metal matrix composites, Metall. Trans. A, 18 (1987), 1160–1163.
Mow, V., and Lai, W. M., Mechanics of animal joints, Ann. Rev. Fluid Mech., 11 (1979), 247–288.
Mow, V. C., Holmes, M. H., and Lai, W. M., Fluid transport and mechanical problems of articular cartilage: a review. J. Biomech. Eng., 17 (1984), 377–394.
Mow V. C., Kuei, S. C., Lai, W. M., and Armstrong, C. G., Biphasic creep and stress relaxation of articular cartilage: Theory and experiment, J. Biomech. Eng., 102 (1980), 73–84.
Müller, I., A thermodynamic theory of mixture of fluids, Arch. Rat. Mech. Anal., 28, 1–39 (1968).
Müller, I., Thermodinamik, die Grundlagen der Material-Theorie, Bertelsmann Universitäs-Verlag (1973).
Müller, I., Thermodynamics of mixture of fluids, J. Mec., 14 (1975), 267–303.
Müller, L., Rational Thermodynamics of mixtures of fluids, in Thermodynamic and Constitutive Equations, Lecture Notes in Physics 228, Grioli, G., ed., Springer-Verlag (1985).
Munaf, D., Wineman, S., Rajagopal, K. R., and Lee, D. W., A boundary value problem in ground water motion analysis — Comparison of the prediction based on Darcy’s law and the continuum theory of mixtures. Math. Models Methods Appl. Sci., 3 (1993), 231–248.
Nam, J. D., Seferis, J. C., Kim, S. W., and Lee, K. J., Gas permeation and viscoelastic deformation of prepregs in composite manufacturing processes, Polymer Compos., 16 (1995), 370–377.
Nicholson, C., Diffusion from an injected volume of a substance in brain tissues with arbitrary volume fraction and tortuosity, Brain Res., 333 (1985), 325–329.
Ogden, R. W., Non-Linear Elastic Deformation, Ellis Horwood (1984).
Owen, M. J., Middleton, V., and Rudd, C. D., Fiber reinforcement for high volume resin transfer moulding (RTM), Compos. Manuf., 1 (1990), 74–78.
Parkinson, J., Brass, A., Canova, G., and Brechet, Y., The mechanical properties of simulated collagen fibrils, J. Biomech., 30 (1997), 549–554.
Parnas, R. S., Salem, A. J., Sadiq, T. A. K., Wang, H. P., and Advani, S. G., The interaction between micro and macroscopic flow in RTM preforms, Compos. Struct., 27, 93–107 (1994).
Phillips, R., Akyuz, A. A., and Manson, J. A. E., Prediction of the woven fiber-reinforced thermoplastic composites. Part I. Isothermal case, Composites A, 29 (1998), 395–402.
Pillai, K. M., and Advani, S. G., Numerical and analytical study to estimate the effect of two length scales upon the permeability of a fibrous porous medium, Transport in Porous Media, 21 (1995), 1–17.
Please, C. P., Pettet, G. J., and McElwain, D. L. S., A new approach to modelling the formation of necrotic regions in tumors, Appl. Math. Letters, 11 (1998), 89–94.
Plyatiskii, V. M., Extrusion Casting, Primary Sources (1965).
Preziosi, L., The theory of deformable porous media and its applications to composite material manufacturing, Surv. Math. Ind., 6 (1996), 167–214.
Purslow, D., and Child, R., Autoclave moulding of carbon-fiber reinforced epoxies, Composites, 17 (1986), 127–136.
Quarteroni, A., and Valli, A., Domain Decomposition for Partial Differential Equations, Oxford University Press (1999).
Rajagopal, K. R., Shi, J. J., and Wineman, A. S., The diffusion of a fluid through a highly elastic spherical membrane, Int. J. Eng. Sci., 21 (1983), 1171–1183.
Rajagopal, K. R., and Tao, L., Mechanics of Mixtures, World Scientific (1995).
Rajagopal, K. R., Wineman, A. S., and Gandhi, M. V., On boundary conditions for a certain class of problems in mixture theory, Int. J. Eng. Sci., 24 (1986), 1453–1463.
Reboredo, M. M., and Rojas, A. J., Molding by reactive injection of reinforced plastics, Polymer Eng. Sci., 28 (1988), 485–490.
Rudd, C. D., and Kendall, N. K., Towards a manufacturing technology for high-volume production of composites components, Proc. Inst. Mech. Eng., 206 (1992), 77–91.
Rudd, C. D., Long, A. C., McGeehin, P., Cucinella, F., and Bulmer, L. J., Processing and mechanical properties of bidirectional preforms for liquid composite moulding, Compos. Manul., 6 (1995), 211–219.
Rudd, C. D., Long, A. C., McGeehin, P., and Smith, P., In-plane permeability determination for simulation of liquid composite molding of complex shapes, Polymer Compos., 17 (1996), 52–59.
Rudd, C. D., Long, A. C., Kendall, K. N., and Mangin, C. G. E., Liquid Moulding Technologies, Woodhead Publishing Limited (1997).
Rudd, C. D., Owen, M. J., and Middleton, V., Effects of process variables on cycle time during resin transfer moulding for high volume manufacture, Mater. Sci. Tech., 6 (1990), 656–665.
Saffman, P. G., On the boundary condition at the interface of a porous medium, Studies in Appl. Math., 1 (1971), 93–101.
Saunders, R. A., Lekakou, C., and Bader, M. G., Compression and microstructure of fiber plain woven cloths in the processing of polymer composites, Composites A, 29 (1998), 443–454.
Schwartz, L., Méthodes Mathématiques pour le Science Physique, Herman (1961).
Simacek, P., and Advani, S. G., Permeability model for woven fabric, Polymer Compos., 17 (1996), 887–899.
Sommer, J. L., and Mortensen, A., Forced unidirectional infiltration of deformable porous media, J. Fluid. Mech., 311 (1996), 193–215.
Sorek, S., and Sideman, S., A porous medium approach for modelling heart mechanics: I. Theory, Math. Biosci., 81 (1986), 1–14.
Sourour, S., and Kamal, M. R., Differential scanning calorimetry of epoxy cure: Isothermal cure kinetics, Thermodyn. Acta, 14 (1976), 41–59.
Tao, L., and Rajagopal, K. R., Unsteady diffusion of fluids through a non-linearly elastic cylinder annulus, Int. J. Nonlinear Mech., 28 (1993), 43–55.
Tao, L., and Rajagopal, K. R., On boundary conditions in mixture theory, in Recent Advances in Elasticity and Viscoelasticity, Rajagopal, K. R., ed., World Scientific (1994).
Tao, L., Rajagopal, K. R., and Wineman, A. S., Unsteady diffusion of fluids through solids undergoing large deformations, Math. Models Methods Appl. Sci., 1 (1991), 311–346.
Tartar, L., Incompressible fluid flow in a porous medium— convergence of the homogenization process, in Non-Homogeneous Media and Vibration Theory, Lecture Notes in Physics 129, Sanchez-Palencia, E., ed., Springer-Verlag (1980).
Terzaghi, K., Die Bechnung der durchlässigkeitsziffer des Tones aus dem Verlauf der hydrodynamischen Spannungser-scheinungen, Sitzungsbehrichte Akad. Wissen. Wien, Mathem. Naturw. Kl., IIa 132 (1923), 125–138.
Torquato, S., Thermal conductivity of disordered heterogeneous media from the microstructure, Rev. Chem. Eng., 4 (1987), 151–204.
Trevino, L., Rupel, K., Young, W. B., Liu, M. J., and Lee, L. J., Analysis of resin injection moulding in moulds with pre-placed fiber mats. I. Permeability and compressibility measurements, Polymer Compos., 12 (1991), 20–29.
Truesdell, C., Sulle basi della termomeccanica, Rend. Lincei, 22 (1957), 33–38.
Truesdell, C., Sulle basi della termomeccanica, Rend. Lincei, 22 (1957), 158–156.
Truesdell, C., and Toupin, R. A., The classical field theory, in Handbuck der Phisik, Vol III/1, Flügge S., ed., Springer-Verlag (1960).
Upadhyay, R. K., and Liang, E. W., Consolidation of advanced composites having volatile generation, Polymer Compos., 12, 417–429 (1991).
Vankan, W. J., Huyghe, J. M., Janssen, J. D., Huson, A., Hacking, W. J. G., and Schreiner, W., Finite element analysis of blood flow through biological tissue, Int. J. Eng. Sci., 35 (1997), 375–385.
Vladimirov, V. S., Equations of Mathematical Physics, MIR (1984). (In Russian.)
Ward, J. P., and King, J. R., Mathematical modelling of avascular tumor growth, IMA J. Math. Appl. Med. Biol., to appear (1999).
Whitaker, S., Advances in the theory of fluid motion in porous media, Ind. Eng. Chem., 61 (1969), 14–28.
Wissler, E. H., Viscoelastic effects in the flow of non-Newtonian fluids through a porous medium, Ind. Eng. Chem. Fundam., 10 (1971), 411–417.
Wu, J. Z., and Epstein, M., An improved solution for the contact of two biphasic cartilages layers, J. Biomech., 30 (1997), 371–375.
Yamauchi, T., and Nishida, Y., Infiltration kinetics of fibrous preforms by aluminum with solidification, Acta Metall. Mater., 43 (1995), 1313–1321.
Yang, M., Taber, L. A., and Clark, E. B., A non-linear poroelasticity model for the trabecular embrionic heart, J. Biomech. Eng., 116 (1994), 213–223.
Yoo, Y. E., and Lee, W. I., Numerical simulation of the resin transfer mold filling process using the boundary element method, Polymer Compos., 17 (1996), 368–374.
Young, W.B., The effect of surface tension on tow impregnation of unidirectional fibrous preform in resin transfer moulding, J. Composite Materials, 30 (1996), 1191–1209.
Young, W. B., Rupel, K., Han, K., Lee, L. J., and Liu, M. J., Analysis of resin injection moulding in moulds with pre-placed fiber mats. II. Numerical simulations and experiments of mould filling, Polymer Compos., 12 (1991), 30–38.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2000 Springer Science+Business Media New York
About this chapter
Cite this chapter
Farina, A., Preziosi, L. (2000). Deformable Porous Media and Composites Manufacturing. In: Markov, K., Preziosi, L. (eds) Heterogeneous Media. Modeling and Simulation in Science, Engineering and Technology. Birkhäuser, Boston, MA. https://doi.org/10.1007/978-1-4612-1332-1_4
Download citation
DOI: https://doi.org/10.1007/978-1-4612-1332-1_4
Publisher Name: Birkhäuser, Boston, MA
Print ISBN: 978-1-4612-7098-0
Online ISBN: 978-1-4612-1332-1
eBook Packages: Springer Book Archive